Cannot install on VMware vSphere 1.1.1 ISE 5
Dear friends,
I try to install VM 1.1.1 on my vSphere environment ISE 5, but I get without success. I met the required hardware configuration (2 CPUs, 4 GB of RAM, 100 GB drive and 1 NETWORK card), but I'm still stuck on the print screen attached (traceback and invalid ELF header of a file of anaconda.
I googled a few times, but I found nothing. What should I do to fix this?
Thank you!
You can post a screenshot of the settings of your virtual machine? Can you try to install an older version 1.1? To see if that works and try the upgrade again?
Thank you
Tarik Admani
* Please note the useful messages *.
Tags: Cisco Security
Similar Questions
-
PlayBook Simulator beta (Win) v0.9.3 - cannot install in VMware Player
Hello everyone. I am fairly new to this programming PlayBook and have to face a frustrating problem. I installed the earlier version and have been more or less successful in programming.
However, with the new version, I am unable to install the Simulator in VMware Player. I have uninstalled, reinstalled, re-downloaded and re-installed, etc. and continue to have the following in the on-screen display in the last step of the installation of the virtual machine.
In the earlier version, the display shows - loading of the neutrinos... and proceeded to complete the installation.
In this version the display shows - loading installer... .and poster cd/EULA.txt in the bottom of the first screen scrolling text. I can scroll up and down and display a lot of text but nothing continues or finishes the installation of the virtual machine.
I would like suggestions.
BTW, my system is Windows 7, 64-bit, 6 GB memory, 800 GB of disk space.
Thank you in advance for any help you can provide.
Terry
It is (very) difficult.
Do not press the "enter" or the arrow key down.
You should stop to support anything at all times when only a few lines of text to the left.
Then down one line at a time. Otherwise your entry extra will be interpreted as
your answer to the question who is supposed to be 'y '.
You will be successful after trying several times.
-
Cannot install/upgrade Vmware tools 9.9.0
Hello world.
I encountered a problem with the installation/update more recent Vmware tools v.9.9.0. Once I chose to update the tools and they have been downloaded, you receive an error "corrupted file from the update server. Check your network connection and try again later. If the problem persists, contact your system administrator or the VMware Support. And now whenever I press the button "download and install" I get this error message and I can see Update tool does not try to redownload the image tools.
I couldn't find where temporary image has been saved, so I reinstalled Vmware Player and tried to download and install the tools to aid different network interface. And even once, I received a message about a corrupted image.
How to solve this problem, do you have any suggestions? I get annoying messages on the new tools available every time I start the VM.
Solved by using this response: Re: VMware Tools missing in the Installation of VMware Player 7
-
Cannot install preinstalled VMware 7.14 or VMPlayer
I have Windows 7 Ultimate x 64 running. Here is a screen of the Setup program and the Task Manager:
Here is the log file. Any help would be appreciated. I downloaded als file 5 times with and without download akami Manager. I also get the same thing when I try to install VMPlayer
Well the next thing to try is the extraction of the content of the package install VMware-workstation - 7.1.4 - 385536.exe using the following command syntax:
VMware-workstation-7.1.4-385536.exe /e c:\wstmp
This process takes a while after refers to the command prompt and the extraction is complete.
Then in c:\wstmp, there are 66 files and you run the "vmware workstation.msi" Package Windows Installer and this allows to bypass the initial screen of the installer of VMware Workstation which shows as empty.
-
Hello, I have install ESXi 3.5 U3 on a Hp Proliant 380.
I have created a virtual machine to Windows 2003, and when I want to install VMWARE TOOLS from Vmware Infrastructure Client, it does not install on the virtual machine vmware tools. Nor has received all messages from a Client Infrastructure and neither of the virtual machine.
Why could this happen?
Thanks in advance
NO.
The installation of vmware tools lies in an iso file, which is located on your host ESX itself and is mounted on the virtual machine when you click "install vmware tools".
Weather or not your host has a cdrom drive is not serious, you can always add a virtual cdrom drive to your guests and use iso files, or the cdrom drive on the PC that you are using the VI client from.
If you vm doesn't have a virtual cdrom drive, it can't mount the vmware tools iso, and you cannot install the vmware tools.
-
Cannot install VMware-vSphere-Perl-SDK - 5.0.0 on Debian
HI -.
I try to install the latest version of the SDK VMware Perl (VMware-vSphere-Perl-SDK-5.0.0-422456.x86_64.gz) on a Debian GNU/Linux "lenny" release.
root: / usr/local/nagios/vmware-vsphere-cli-distrib #./vmware-install.plCreate a new vSphere CLI installer using the tar4 format.Installation of vSphere CLI 5.0.0 build-422456 for Linux.You must read and accept the vSphere CLI end-user license agreement forcontinue.Press ENTER to display it. qDo you accept? (yes/no) YesThank you.Cat: / etc / *-output: no such file or directorySH: rpm: command not foundOpenSSL-devel is not installed on the system.OpenSSL-devel-0.9.7 is required for encrypted connections.Please install openssl-devel version 0.9.7 or higher.SH: rpm: command not founde2fsprogs is not installed on the systeme2fsprogs-1.38 is required for the UUID.Please install e2fsprogs 1.38 or higher.root: / usr/local/nagios/vmware-vsphere-cli-distrib # dpkg-l e2fsprogsII e2fsprogs 1.41.3 - 1 ext2/ext3/ext4 file system utilitiesClearly the Setup is broken.
So, my question is - is the installer deliberately broken (IE, no support for Debian) or is it a perl error code that needs fixing?
Thank you
Chris
As William, he will not be supported, but you can use the SDK Software VMware Perl quite easily on any platform of Perl (I did it with window as well). I did specifically on Ubuntu and OS X over the years.
Install the requirements of the module as shown in "vSphere SDK Perl Source Code installation on Linux". In the source package, copy the folder VMware vmware vsphere-cli-distrib/lib/VMware/sharing of archive download Perl Linux SDK to your path to Perl.
For required modules, you can use PPM, CPAN or apt get the packages.
I ran this way for years without any problem, but this obviously isn't an official support statement
You should be able to simply do not put a proxy during Setup. It's there in case it is necessary to download the module dependencies.
-
Cannot install VMware Tools.
Hello
my client have esx1 and esx2 - vSphere vCenter device 6.0 and 6.0 knots. When I try to install VMware tools on Windows Server vm = error:
VIX 21001 = error code
Cannot install VMware Tools. An error occurred trying to access the image file ' / usr/lib/vmware/isoimages/windows.iso ' to install VMware Tools: 2 (no such file or directory). If your product comes with the module of VMware tools, VMware ESX to reinstall, then try again to install the VMware Tools package in the virtual machine
When I connect to esx1 via Putty and check ' usr/lib/vmware /-the 'isoimages' folder missing.»
Please, what is faster solution?
CZ THX
Hello
problem solved...
I don't know why, but on esx1 - Local Direct USB access - declined, I restarted esx1 and now works perfectly
so, I lost my network settings
THX
Tom
-
Install vmware Vsphere 4.0 on HP dl160 G6
I need to install vmware vsphere 4.0 on Hp dl160 G6, I have activate Raid1 on aboard, HP SMART ARRAY B110i sata controller, I have two hd sata 160 GB each.
Installation of vmware on the storage configuration I see two HD, but I'm sure that anable RAID 1! I need to install a driver?
Thank you too much.
Yes you can.
Do not forget to allow the ESXi with the serial number you already have (otherwise you cannot manage their vCenter).
André
-
Hello
We run with vCenter 6.0 version 6.0.0 build 2997665.
Installing Update Manager in different windows server with vCenter 6.0 U1 installation media.
During the installation of Update Manager, it gives below error.
Error: Vcenter is incompatible with vmware vsphere Update Manager that you are installing.
Problem has been resolved after downloading installation VC VMware-VIMSetup-all - 6.0.0 - 2800571.iso, which is compatible with running VC build version.
-
Install VMware vSphere Client on the domain controller computer
Hi team,
How to install VMware vSphere Client on the domain controller computer? Can someone guide me?
Thank you
John
Please follow this link:
http://www.vmwarearena.com/2015/01/how-to-install-vSphere-client-on-domain-controller-machine.html
Thank you
Venance
-
Cannot install VMWare Player, workstation or anything like that
All appear to be the same way with a message like:
However I've checked that the file exists and that I can access. What is the problem?
I had VMWare Player 6.0.5 and could not install/update VMWare tools. So, I suspended my operating system prompted and rebooted VMPlayer. He told me that there is a new VMWare Workstation something 10.x and I wanted to upgrade to it. Okay, of course. Downloaded the update and tried to install. Said to uninstall VMWare Player 6.0.5. Being suspicious, I went and downloaded VMWPlayer 6.0.5 where he screwed up the installation of Workstation 10.0. Of course, he did. So I tried to install Player 6.0.5 so I could return to my suspended VM. In my opinion, what he said that I could not install because I haven't restarted. So I rebooted. Now, I can't install Player 6.0.5 or Workstation 10.0.0 or whatever it is. They all fail on the same way saying the cannot find a .msi file I can find and access.
Help!
BTW, you guys have far too much product and names making it confusing. What should I use? Player? Workstation? Spear? vCenter, Fusion. The list goes on and. Do not try to give me the list of "well it's for this reason and this other thing". The point is there are too many products and it is too complicated. If you want to tell me what the structure of the product is just limit it to the product I should use. I have a Windows 7 box and you want to run Ubuntu in a VM desktop - that's all...
Thank you.
Hello
Please note that this is a forum for peer support and therefore, it is mainly users of VMware help other VMware users who make up the bulk of this forum. It is VMware employees responding in time in time, but in your case here (Note: VMware employees are recognizable because they have a small 'vm' next to their name logo)
With regard to your current number. If you install VMware Workstation, then you have also installed VMware Player next.
Even after the expiry of VMware Workstation, you can continue to use the free VMware Player.
Hope this helps,
--
Wil
-
I'm new with VMware. I have a DELL T420 server without an operating system in it. I have a question, this first step, I need to install Windows 2012 R2 Datacenter to my server DELL T420, then the next step I will download the upgrade to VMware vsphere Hypervisor 5.5 2, is that correct? I thank in advance for your advice.
1. you must first download ESXi (hypervisor) and install it on your server.
: Refer:vSphere 5.5 - How to install and configure VMware ESXi 5.5 - YouTube
2. once the ESXi installation is successful, you can create a VM and then install windows 2012 R2 in this virtual machine as GOS.
See:How to create a VM on a VMWare ESXi host using a VSphere Client - YouTube
Let me know if you need help
-
Dear all,
Here, I'm a bit confused so I need help to clarify which exam I have to take and what is the matter with this review. I took the course VMware vSphere: install, configure, manage [V5.1] and when I tried to register for the exam, he gave me the review "VCPD510: VMware Certified Professional-Desktop ' and when I tried to find some documents to study, I found two different materials, which relates to the VCP5-DT, which is all about VMware View: install, configure, manage [V5.x] and the other which is VCP - 510. While we should I study.
Help, please.
Hi mariusme,
The review, you have to take is VCP5-VTC. VCPD510 is for desktop, which is entirely different. Please go to the vmware certification page and select VCP5-DCV(vmware certified professional in datacenter virtualization) and you will find the action plan. You can follow it, and since you've followed the required courses, you will be eligible to take the certification. And also sign up for VTC - VCP on Vmware Portal before you book review on PearsonVUE.
-
VMWare vSphere v5.5 ESXi install errors
Hello
I'm trying to install VMWare vSphere, ESXi v5.5 on a machine that I've used as a Windows 2008 Server. Pretty well spec'd (core i5, 8 GB, 3.5 TB of space etc.), but it's just a generic machine with a motherboard micro ATX ASUS and so on. I use an external USB DVD drive.
It support (or seems to load) GRUNB fails with an error of '22 '. When I changed the BIOS to AHCI settings error replaced by "Error 21".
I tried to eliminate any problems:
- Tested the drive and the USB on a core i3 laptop [AOK]
- Checked hardware virtualization is enabled in the BIOS OF THE system [YES]
- I tried vSphere 5.1 [SAME MISTAKES]
Does anyone have ideas, what could cause this problem?
THX
Keke
All problems solved now.
James
-
Cannot download - VMware vSphere PowerCLI for tenants
Hi people,
I'm not able to download VMware vSphere PowerCLI for the R2 version of tenants i.e. 5.1. Go to the page cannot be displayed.
Please check.
Kind regards
Rajesh
VMware vSphere PowerCLI for tenants
Seems to work for me from this link.
Perhaps a local cache in your browser problem, or a problem of Akamai in your area?
Maybe you are looking for
-
Need help reseting and ipad.
Hello! I bought and used ipad, I did the whole, but I forgot the password, and now it is disable. I tried itune from a computer, but the reset dialog box got out, so o can do icloud because I did all find my device. Now don't know what to do.please h
-
OK... I downloaded a free program and now when I try to access my Lastpass safe a page comes up with an oops can't find. The tab on the page has the word Chrome. Now, chrome has been loaded download free even if I ticked the box don't not to do this.
-
Information / photo upload control
I have a large photo collection (I use iCloud library and have used so far nearly 600 GB). I keep the originals on my iMac and we have two laptops (MBA & MBP) and different phones and iPad all share the collection of photos. The photo sharing/synchr
-
DAQmx Read simultaneous calls on the same digital line
Hi all I use v10.0 LV 32-bit on Windows 7. I use DAQmx Read (in a task) to check the value of a digital line. Is it OK to do this in two different locations in a program at the same time for the same digital line? Or I have to put a wrapper around re
-
How can I move photos from one folder to another?
* Original title: photos How can I move photos from one folder to another?