Cannot install SRM 5.8.0

Hello

I can't install SRM 5.8.0 with Vsphere 5.5 u 1 shoul I put to update the Vsphere update 2 and what about ESXI should move to update 2, also?

I can't find the upgrade file should download iso full of u2 VSphere 5.5?

Thank you

Hello and welcome to the community

SRM 5.8.0 is compatible with VC 5.5 U2 only - it is mandatory to upgrade your VC to 5.5 U2.

SRM 5.8.0 is also compatible with ESX 5.5.0 - it is not required to upgrade the ESX

You can see the matrix of compatibility here: http://partnerweb.vmware.com/comp_guide2/sim/interop_matrix.php?

Best regards

Ivan

Tags: VMware

Similar Questions

  • Cannot install SRA on SRM 4.1 - EMCSRDFSRA_2.2.0.3

    Hello

    I installed SRM 4.1 on a protected site and recovery successfully and made a successful pairing. The installation of SRA for EMC ((EMCSRDFSRA_2.2.0.3), it throws error Solution Enabler must be running version 7.0 or higher. Where do the key of the solution? I went through a lot of documentation, but no help. If someone could provide details about the Architecture, would be great.

    Kind regards

    VS

    Solutions Enabler can be downloaded at powerlink.emc.com. Your storage team should have though, as it is required to manage your Symmetrix barrette

    The SRA requires access to an installation of Solutions Enabler that has presented to her gatekeeper. All commands to the Symmetrix management ultimately have to appear in the strip of Gatekeeper devices that are presented to the host of Solutions Enabler as any typical (for example on fiber channel HBA) device. That being said, customers can get this facility SE through the network to manage the Symmetrix indirectly activating a demon in SE and turning this facility SE in a server API SE. The customer (in your case the SRA SRDF) will then award table API calls to management via the network on the server of the API that will send them to the Symmetrix via issue orders directly to his guards the.

  • Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

    Hello

    I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

    I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

    I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

    I would like to know if there is more information I should provide that might help.

    Thank you for your time.

    Ben

    Hi Ben

    Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

    When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

    How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

    Kind regards

    Rick

  • Cannot install 9.3.5 iPad after two downloads

    Cannot install 9.3.5 for ipad

    HI I just wanted to know if it was on an ipad or a. Mac if it's an iPad plug support on a computer or go on http/www.apple.com

    Thank you

  • Cannot install OS: "this identifier Apple has not yet been used.

    I just got my first Mac yesterday, a mid 2010 Macbook of opportunity. It's in great shape, works great, I was briefly very satisfied with my purchase. Then I tried to reformat/reinstall, as it does whenever purchasing a computer used.

    I followed the instructions here: https://support.apple.com/en-us/HT204904 and when I got to the step three, after the failure of the hard drive, it wouldn't let me install the operating system. He wanted to connect first with my Apple ID, so I did an Apple ID, but now it keeps giving me an error "this identifier Apple has not yet been used in the App store" and then it gives me the opportunity to cancel or "review". Click Cancel simply cancels the installation, just by clicking on review also cancels the installation.

    An ID is not necessary, but there is no way I can see to avoid it say the instructions on this page. It was suggested that maybe I could avoid the connection on the way to recovery, rather than recovery of the Internet, but the Cmd + R and Cmd + Option + R give recovery of the Internet. I don't see any way to get to the regular recovery.

    I had a suggestion to install from the disc, but I have not all discs. If I could download it from somewhere and burn them then that would be nice, but the instructions on this page are pretty clearly that it should not be necessary to use disks. I should be able to do without signing in.

    So... what upward with who? Where should I go from here? Is it possible to do a regular recovery? Or bypass the Apple ID thing?

    < published by host >

    "a mid 2010 Macbook opportunity."

    "Cannot install OS:" this identifier Apple has not yet been used.

    It's the property > change owner of a Mac of opportunity

  • I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

    Hello

    I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

    The 'Intermediary' folder is present and rest after a restart, but the extensions do not get installed. They show in the extensions page with the message "will be installed after you restart Firefox" and remain like that, no matter how many times I restart.

    Any idea?

    Under Firefox 24.0 Windows 8.1

    Thank you very much
    BD

    P.S. Just tried to install the add-on "convenience store" before asking the question and I got an error saying that it cannot install because it cannot change the necessary file. (I did manually instead)

    I tried to delete the files extensions.* nothing works. However, I deleted the addons.sqlite file and restarted my computer (computer not only Firefox) and that seemed to do the trick. Problem solved.

    Thank you for your help, it is appreciated.

  • "Cannot install update and the error occurred ' iOS 9.3.2

    Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

    Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

  • Cannot install the update error

    I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?

    I would try to update via iTunes

    Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3

    The time that the phone is detected, choose software update

    If the phone is not detected - see here

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

    OR

    Please take a genius appointment at an Apple Store, or select another authorized service provider.

  • Cannot install iOS 9.3.1

    I downloaded the updated iOS (9.3.1) but cannot install it.

    I made sure I got enough memory on my phone and the battery charge, but it will not install. Can someone help me?

    Thank you!

    Hi moppsy,.

    Thank you for using communities Support from Apple!

    Leave your post, sounds like you downloaded the iOS 9.3.1 update live, but have not been able to install it. We know that this type of situation can be frustrating, but we are here to help.

    To resolve this situation, I would recommend the work done these steps in the following article.

    Delete and redownload the update iOS

    If you can't always install the latest version of iOS, try to download the update again:

    1. Go to settings > general > storage & use of iCloud. Under storage tap manage storage.
    2. Find that the iOS to update in the list of applications.
    3. Press the update IOS, then remove the update.
    4. Go to settings > general > software update and download the latest iOS update.

    If the problem happens again, try to update with iTunes.

    Get help with updates of live iOS - Apple Support

    Best!

  • Satellite L655-145 cannot install the bluetooth stack

    Cannot install bluetooth stack. Just Setup freeze. All other drivers installed successfully. Device Manager only show Bluetooth ACPI device. This problem appeared after the update of the BIOS of the original version 1.80 to more older (1.80-1.90-2.10-2.20 > > >). Downgrade from 1.80 take no effect.

    PS. Sorry for my bad English.

    Hello

    As far as I know the laptop is equipped with WIFI and Bluetooth combo card!
    This means that Wlan and BT functionality is controlled by a single card.

    If you BIOS outsider (don t know why) Please put failing first.
    Save the changes and reboot the laptop.

    Then download the BT BT Toshiba stack.
    Activate BT (FN + F8), then launch the installation of battery BT once more.

  • Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

    I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

    Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

    Australia
    TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

    Cannot install the latest drivers below (everything worked when bought the laptop):

    -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
    -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

    * DVB - T Tuner Driver *.
    The EXE file extracted in the temp folder and goes no further.
    The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

    * Bluetooth Driver *.
    First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

    Then install attempt fails to go too far (is unable to install the driver at all).

    Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

    I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

    Refer to pictures:

    DEVICE MANAGER
    http://I52.Tinypic.com/35cr38i.jpg

    1ST COURSE SETUP
    http://I52.Tinypic.com/2r6jfv9.jpg

    2ND INSTALL PROGRESS
    http://i55.Tinypic.com/jgphfc.jpg

    see you soon

    Dennis

    > The EXE file extracted in the temp folder and goes no further.
    > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

    Try to extract the exe from another place, not in the temp folder.
    In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
    Choose the installation procedure advantage and point to the folder that contains the extracted files.

    With regard to the issue of the BT;
    Download the new battery of BT from here:
    http://APS2.toshiba-tro.de/Bluetooth/

    Then clean the registry using the CCleaner.
    This tool is freeware and can be downloaded on several different pages.
    So after cleaning check if you could install new BT of the register stack.

  • Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

    Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

    The Recovery Manager starts well. He correctly completed the following steps:
    1 format HDD

    2. copy the files from the CD to the drive. It copies all the 3 CD.

    Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

    Contact HP support

    In most cases, recover the hard disk will solve your problems.

    If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

    After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

    The laptop restarts and displays the message on the screen "Bootmger" not found

    I called HP support and asked to run the hard drive and memory test and he succeeded.

    I can install windows on another CD I have with.

    But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

    I have two identical laptops. Tried installing on both and having the same problem on both.

    Can you please help with this.
    HP sends fake CDs?

    Kind regards

    Hello

    Here is another solution, you can try to see if you can get Windows 7 to install correctly.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

    I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
    I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
    Windows found driver software for your device but encountered an erroe trying to install it.
    AMD USB 3.0 host controller
    The system cannot find the specified file.

    I try to point the location of the driver but same error.
    Other drivers installed ok only gives error

    I ve downloaded and unzipped the driver and everything seems OK.
    As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

    Try to download it again and start the installation manually.

  • Re: NB100-12: cannot install Windows XP

    I cannot install the operating system to start, for a clean installation, the cd boots and seems to start installation, drivers etc. start loadind
    Then before you get to the point "want install you windows page, an error message appears saying my HARD drive is damaged or has a virus?"

    Any ideas?

    I can't really help, but I see the same problem :( I tried XP, 2000 and server 2003 installation CD. Either I get the same message you saw, or Installer Blue-screens.

    I've seen it suggested elsewhere to change the SATA in the BIOS from AHCI to compatibility, but that does not help either.

    I have to admit, it's as if the Windows Installer has problems see the hard drive, but I don't know what to do about this. Install a different disk drive, maybe?

  • Satellite R630 - 11L - cannot install Windows XP Prof SP2

    I removed hard drive-> insert new ald (SATA) hard drive-> insert CD Windows XP SP2 DVD driver teacher-> Power Off.
    Power On-> laptop reads the Windows XP SP2 CD-> installation process

    But in the end, only 'bluescreen': cannot install (CD ist already installed successfully for an another old laptop.
    I have 5 times to try.

    Who did it successfully?

    Thank you very much!

    On this forum, you can find a lot of discussion on the installation of Windows XP Home edition on the new laptop models. What you need is driver SATA and it must be loaded prior to installation of WXP begins.

    More info on what you can read on - http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

    If you have any other questions you are welcome.

Maybe you are looking for

  • Could not open the spare have compact &amp; rebuilt all the .msf SOLVED caused by Zindus

    TB 25.5 on Windows 7 the profile is 12.5 G dates back to 2002. Return often, but... When I click on any accessory a small widow appears to maybe 1 tenth of a second or less and disappears. Cannot read anything on this subject. Compacted, saved, delet

  • MFC Gameclient

    Playing the Poker of ESPN, for example, Microsoft Windows Gameclient MFC Application has often appears and exits the program. I can not find Gameclient and research on this site is not found. How to disable Gameclient or allow the downloaded game ESP

  • His lack of Panel of volume level

    My volume control panel will usually have an indicator if there is audio playing, but recently it has disappeared. As you can see in the second chart, always we collect these data but it is not displayed. Does anyone know why this is or how to fix it

  • Z10 blackBerry airplane mode

    I have a 100-1 STL Z10 and cannot set off airplane mode All the ideas!

  • BlackBerry Smartphones adding in blackberry messenger contacts

    Hello, this morning I have probles adding contacts to Messenger of BB.  When I try to type a contact disappears in the add a contact area, the shoown in light gray and all that you type a PIN or a name from the address boolks, it does not recognize a