Cannot install the home network.

Similar Questions

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Satellite M45-S265 - cannot install the wireless network

  Hi all!

  My laptop has had a big problem and HARD drive crashed. Unfortunately I lost all the data with no chance to recover anything. I installed a new HARD drive. I installed Win XP - SP3.

  But I'm unable to install the wireless network. I continue to pass the button in front of the laptop - nothing. I type the combination Fn + F8 - nothing. I think that I have not installed the driver corectly.

  P.S. - of course, I lost the CD.

  Can someone help me?

  Thank you.

  Hey,.

  > I think that I have not installed the driver corectly.
  Then you need to (re) install the WLAN driver. Otherwise, you are not able to use the WLAN connection correctly.

  Anyway, your model is listed on official Toshiba US page so that you can get all the drivers:
  http://www.CSD.Toshiba.com

  If you have any other questions, please let us know! :)

• Windows cannot connect to the home network

  Hello

  My laptop can't connect to my home network. It can detect the network, but whenever I try to connect to it, it said "Windows could not connect to the (network).

  My other devices (iPad, mobile phone) can connect to him, so I doubt that it is a problem of modem?

  I have connected my laptop to the modem directly via an ethernet cable and it works. What is a network driver problem? Because I tried to update the driver, but they said that they are updated to the latest already.

  Someone help me please.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you are unable to connect to the network via modem, but thread and I'll be happy to answer your query. Let me ask you;

  1. How you did update the network driver?
  2. When was the last time you were able to connect to the wireless network?
  3. Remember to no particular change in the computer before the show?
  4. What is the brand and model of the computer?

  Since you are able to connect to the network using the modem, it could be because of the card network is outdated or corrupted. I would recommend that you try the methods below and check.

  Method 1: Run the network troubleshooter

  Refer to the article below to run the network troubleshooter

  Using the troubleshooter from network in Windows 7

  Method 2: Update the NIC manufacturer support Web site

  I suggest you to visit the website of the manufacturer of the computer support and install the latest network adapter on Windows 7 Web site and check.

  Restart the computer and then try to connect to the network after you have installed the latest driver.

  See also: why I can't connect to a network?

  Hope this information is useful.

• The computers on the home network can't see the other

  Hello

  Portable Windows 7 Ultimate my two computers cannot see each other on the home network. Both have their firewall off the coast. We have McAfee installed (but disabled). I can't ping or computers. Both are on the same workgroup. Both are on the home network. Both have their network discovery is enabled. Both have active LLTD protocols.

  A computer cannot find homegroup on the other computer. I tried both ways. All important services are successfully started and running. No problems with network connectivity to the internet. I can ping sites like google.com and yahoo.com. I can't just ping the other laptop on the network. Any ideas?

  Thank you

  SS

  FYI: I have UltraVNC running on both computers. However, the program does not work b/c computers can't see each other. I also have LogMeIn installed on both. This works because logmein works via the internet.

  Hope that you have found your answer now. I had the same problem and mine was the computers have been appointed the same you have he tried but if not try this:

  ·        Step 1) on your keyboard, press the 'key Windows and pause pause' to bring up the 'System Menu'.

  Step 2) when the "System menu" appears on the lower right, click "change settings"

  Step 3) click on "change" on the "System Properties".

  Step 4) Change the 'computer name' (must be DIFFERENT! to other computers)

  Step 5) press "ok" (you will get a pop up just press ok)

  Properties of step 6) on systems ""change "" the ""computer name " the same as the one on (step 4)"

  Step 7) click on ""okay ' and let the computer to restart (If it does not restart just disconnect and reconnect) "

  Follow these steps and you shouldn't have a problem.

• System update is available in the home network only

  Given that the demand for services of motorola update is updated through google game store I get error message "system update is available in the home network only" whenever I check for the update. Is there any method to disable this error so that I can check updated even in roaming? My data even Bill for home and roaming networks so I do not think that this error doing all good its just new way to annoy users.

  Yes! You cannot upgrade to the latest version of the software on the mobile network... try using wifi if available!

• Error code: 0 x 80070490, trying to connect to the home network

  Original title: 0 x 80070490

  Received this error code when you try to connect to the home network.

  Hi Joseph,.

  Did you the latest changes on the system?

  You can try to temporarily disable third-party antivirus software and firewall installed on your computer and check if the problem persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  Note: Be sure to enable the security software on the computer after checking.

• Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

  I recently bought Age of Empires 3 and tried to install it.  I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed.  I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode.  Any suggestions?

  Hi void 1337,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also follow the link and check if it solves the problem:

   

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  You can also view the article mentioned below to learn more:

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

  http://Forum.AgeCommunity.com/

   

  Let us know if that helps.

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Cannot install the all-in-one printer

  Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

  System Windows 8.1

  I uninstalled printer because had message printer disconneted.

  Check the devices & printers in the control panel

  Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

  I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

  According to HP print and scan the doctor 4.3

  The following products are visible from your computer

  HPDD4BE7 (HP office jet 4500 G510g-m)

  connection: network

  software requirement: installed

  I tried to print but prints blank pages

  I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

  I have good HP office jet 4500 G510g-m printer installed?

   

  Troubleshooting report

  Problem with the yellow triangle detected printer with an exclamation mark inside

  There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

   

  Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

  First step: rename the .dat files in the Windows folder

  Search box, type % windir %

  No adjustment results found for your search %windir%\System32

  The first step is not a solution

  Second step: download and install the software from the HP site

  Not a solution: when click on get installation message: the system cannot find the specified file.

  You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

  question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

  I have no problem, download and install any software but

  HPDD4BE7 (HP Officejet 4500 G510g-m)

  I did the test HP officejet 4500

  Green connection box

  device status green checkmark

  I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

   

   

  Ok

  Please try the following steps:

  1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
  2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
  3. Type %windir% , and then click OK.
  4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
  7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
  8. Launch the dialog box run by following steps 2, type % temp % and click OK.
  9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

  Please follow these steps in the exact order, is there a difference during the installation of the software?

• Cannot install the printer. The print processor is not (winprint)

  According to the scenario:

  DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.

  DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.

  Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.

  I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.

  I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.

  The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.

  There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.

  Is there anything I can do to get the job to the printer on DC2?

  (And for those who ask why install on a domain controller, there is no member server in this site).

  Thank you

  Hello Josi,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• ICF on Windows 7: how to change the location of the home network be connected?

  Windows on Windows 7 firewall - ' Home or work (private) networks are not connected and 'Public networks' are connected. This prevents the PC to be seen on my home network.

  How can I change the location of the home network be connected?
  I have internet access but cannot connect to a network.

  Go to "Network and sharing Center" > click on "Customize" > change the location of the 'Public', 'private '.

  Edit
  Sorry the above is garbage, I was on mode vista.

  Try, 'network and sharing Center' in the section 'Show your active networks' - it can show 'Public network' or 'work '. If, so click on the one which is indicated and select "home network".

  Note:
  If the other PC on your network are Win XP you can change the name of working group of win7 in "MSHOME".
  IE "network and sharing Center" > click on the arrow down to the network discovery > change settings > tab computer name > change.

• Get a "not connected to the home network" error while trying to print

  * Original title: printer problems

  Hello I have a HP Officejet Pro 8600 that I bought at Best Buy, and I have printer problems, I ran the troubleshooting on my control panel from my computer and it says that it is not connected to the home network which can do on my end to fix, I'd appreciate any help, thank you very much!

  Hi John,.

  I will certainly help you in this matter.

  -Have there been recent changes made on the computer before the show?

  Method 1: Run the Microsoft Fix and check.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

   

   

  Method 2: update the printer drivers and check.

   

  Find and install printer drivers in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

   

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

   

  For more information, see the links.

  Printer network problems (applies to Windows 7)

   

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-network-printer-problems

   

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the problem persists or you have any other questions, do not hesitate to let us know. It is our pleasure to be of service.

  Thank you.

• Unable to connect to the home network after you connect to the internet at Duke University

  Noteboook W7 Pro cannot reconnect to the network after you connect to the internet as a comments/visitor at Duke University.  The Duke system is predatory changes to my computer, and I can't fix it with the restoration of the system.   The home network is a Windows workgroup with most XP, no password only required machines.  This has happened in the past when the guest was an XP machine too, and then he had something to do with the DNS settings.  Cost me a lot of time and anguish and loss of productivity.

  Hello

  1. do you get an error message? If Yes, what is the exact full error message?

  2. are you able to connect to the internet?

  See the help article and check if it helps.

  Method 1

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_2

  Method 2: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know the status of the issue.

• Transfers of extremely slow files on the home network 802.11 g

  Hello

  I have a home network with only two devices (more the router) on this subject.  The first is a portable computer, the second is a desktop PC / multimedia.

  My problem is that when I try to transfer a file from one computer to another, the transfer is terribly slow (for example, a 200 MB file will take 30 minutes).  I know that we cannot wait to be as fast as advertised wireless transfer rates by the manufacturer, but 100 kb/s is just too slow - especially when you consider that I can download files from the internet (on the home network, through the same router) to > 600 kb / s.  So, while I am very confused of what could be the problem, I'm pretty of course it is not a question of signal strength (and leaning me more towards a PC issue rather than a router problem).
  I looked online and saw people suggests to disable remote differential Compression and WIndows meeting space (which I did on both computers) - but my problem persists.

  Someone at - it any other suggestions?

  Thank you!

  Hi Enrique.

  If you are still experiencing slow I suggest to post your problem with your installation using the link below:

  Forum Windows 7 IT PRO networks

  hope this helps,

  B Eddie