Unable to connect to the home network after you connect to the internet at Duke University

Similar Questions

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• hp5610: unable to print from the internet regardless of search engine

  I'm unable to print from the internet regardless of internet search engine. I ran the impression scanning hp doctor who shows no match port, I don't know what that means. What I've tried is; power off printer, internet modem and usb ports restarted, changed, cable and ethernet cable. This problem has been resolved before by switching engines, this has no effect now. Help

  Mikev

  Welcome to the community of HP @mikiev,

  I read your current and previous posts about how you can't print from the internet, and I wanted to answer you with my suggestions. I understand that you have tried to use different however search engines, try to return to my colleague's response @RnRMusicMan on the link below and try to use another web browser altogether. Again, if you use Google Chrome, try Firefox or Internet Explorer.

  • problems printing from the internet

  If Chrome and Firefox will not print, try printing from NotePad, which is a program that is preinstalled on your system to see if the draws work from there.

  You can also try uninstalling and reinstalling Google Chrome or Firefox, whatever one you use often, to see if that helps the printing problem.

  Let me know what is happening and we can go from there!

  Good luck

• Unable to print from the Internet using HP printer psc 1210

  Original title: hp psc 1210 printer xannot can be identified by my laptop Viao soni

  I'm unable to print from the internet. This problem has not occurred before.
  What should I do or change the setting to be able to print again.
  Thanks for your help.
  Darius
  

  Hi Nicolas,.

  This problem may occur if the printer driver is corrupted, outdated or incompatible.

  1. what web browser do you use?

  2. the problem occurs with all web browsers?

  3. deal with any problem while printing from the computer?

  4. do you receive any error messages? If Yes, what is the exact error message?

  Method 1:
  I suggest you try the procedure described in the article, if you are using Internet Explorer 9.

  You receive a script error and are unable to print from Internet Explorer 9
  http://support.Microsoft.com/kb/2652062

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  I can't print or preview before printing a Web page in Internet Explorer
  http://support.Microsoft.com/kb/973479

  You can check the link for more information:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Unable to activate Windows XP Home Edition after the repair facility.

  Of that, I was running a Dell Dimension 5000 bought from the Dell website in 2005. After this computer from run very slowly, I decided on an upgrade. So I removed the hard drive of this computer with XP Home Installation and everything what it intact and plugged the hard drive into a completely new computer (that I bought and customized piece by piece). I also installed Windows XP Pro using the ability of XP to run dualboot. Now the Pro works well, but has of course none of the programs of the host OS installed as even if Pro and Home are installed on the same drive C, Pro of course did not the registry of home settings. That's fine, but when I chose the House to the splash screen immediately after my computer upward once again, I have encountered an error saying that Windows has shut down the computer to prevent damage etc. by a blue screen of death. So I fixed installed House, by inserting the Home CD in the CD drive (which is also new and I bought, not even the one from my old computer to 2005), choice of APPETIZER and not the repair console and then clicking R to repair the detected existing OS. I fixed installed and I was thrilled when the problem has been resolved. When I chose the House and after having set up, I was greeted by the familiar screen with users that I had set up on my PC of 2005. When I clicked the user admin, typed the password, he accepted the password and then a box came up saying I had to activate Windows before I could open a session. By clicking on the number resulted in the user disconnects automatically before the start menu or desktop appeared. Clicking Yes led me to a screen that gives me the choice to choose between online and phone activation. As my entire computer (except for the hard drive) is new, the internet network adapter is also new, and that's why the internet settings (the 2005 model old) which I had not yet changed on the Pro Installation do not allow me to activate via the net. I tried via telephone following all the instructions and punch in the 25 digit code generated by the wizard in the phone and told me that the operator could not generate a code (for me 2 type in the boxes provided and therefore use to activate XP Home). I then shut down the PC, went to the installation of Pro, changed the IP settings according to the instructions given to me by the ISP to the phone and checked the net now works on installation of Pro IE. It worked, and I now turned off, chose the House and tried to activate on the net and there is not yet well make sure that my computer is connected to the net. I even clicked on the phone option and changed my ID by typing my OEM 25 product key numbers and clicking Refresh. I tried again by phone and still could not activate my installation in a House. The installation CD home I used was the 2 me by my Builder (a purple disk saying OPERATING SYSTEM: ALREADY INSTALLED on YOUR COMPUTER). This CD certainly isn't a forgery because I ordered directly from DELL and not even the 2005 Bill to prove it. Is it because I changed my system components and not my hard drive with it, which is the origin of this problem? How can I fix this without backup everything and remove the installation of the House and then re - install?

  "ArjunC" wrote in message News: 3df4138b-2174-4cb1-821e-0527dc60da2c...

  In fact the Windows XP Pro has been installed by the people who moved the hard drive to the new computer. I never asked for it. But remove XP Pro still wouldn't solve my problem. I need to find a way to use my original of 25 characters product key or get a key of success generated by phone so that I can log on to Windows XP Home Edition and continue to use my PC as how I used my old. Some people have told me that I can convince to install MS by phone that I transferred the disk hard - 2 a new computer and then tried a repair but the problem is that all the numbers given on Activation Wizard phone are automated, giving instructions, asking the ID generated by the wizard and then telling me that they are unable to generate an ID for activation. If there is human here, how do you convince a machine of my innocence :)

  You need to reinstall using an XP Home OEM disk - see if one of your friends has one you can borrow. The key on your COA sticker will be valid for this.
  You can also contact Dell and ask them to provide a set of disks in your machine - for a price.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Problems with the windows/debian home network after router switch

  Hi all:

  I'm new on all the forums, but desperately need help. Even though I am not new on windows and have been building my own computers for years, I am pretty new to networking and also for Linux.

  I have a home network with 3 computers with windows 7 installed and my server with Debian Squeeze. Somehow I've muddled through the installation of debian and even on my network using samba (after days of research). Everything has been great to work with all 3 computers and my server talking to each other.

  I got internet connection across the home network, and all the computers + Server appeared and was accessible on the LAN. It was with a little D - link DIR-601, last week I lost all the internet connect to Comcast, which turned out be their problem but Comcast informed me that my router was not the best and he was originally put my speed problems.

  So I bought a new router Linksys WRT54GL and installed yesterday and it's where I need help... I have internet connection and you can surf the web on all computers 3 windows and the debian server, all computers 3 windows appear and are accessible on the LAN, but not the debian server.

  As soon as I reinstall the D-link router, everything is back to normal. I tried with my limited knowledge of Linux to change network configuration files in my debian server but so far no change. I'm not sure this is a linux problem or a problem with linksys... If anyone has any ideas on how to solve this problem, I could use you help... Thank you ALL!.

  Thanks for your suggestions, but it turns out that the problem was a Linux problem, after changing routers, I had to make some changes in debian Linux as share. I'm on duty again.

• Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

  I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

  Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

  I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

  Someone, please help!

  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  Hello

  When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

  First step, log on to the HP support and download the latest drivers for your wireless card.

  The HPG60 is a very good phone but its wireless card has problems with old drivers.

  In which case it's a hardware problem, contact HP support.

  In general, you can use this process to find out what's wrong with the wireless.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot connect ot my wireless network after you run Setup WRE54G

  I bought a camera (ver. 3 - en) WRE54G refurbished. Just before the installation, I was able to connect to my wireless network, internet access, etc.

  So I ran the installer for the WRE54G to my laptop, which failed because the installation program could not connect to the diving (device was plugged).

  After this attempt, I am still able to connect to my wireless network at home with my laptop, however, I cannot access the internet.

  Other computers (macBook, my Galaxy Tablet) have no problem with the wireless network, only the laptop that ran the Setup program.

  I restarted the wireless router and my laptop several times. I then unplugged the WRE54G - no difference, Iam not able to access the internet.

  Can you please help?

  THX

  Never mind. For some reason any annihilated configuring the default gateway setting - so no DHCP, DNS server.

• Unable to connect to wireless internet after Windows Vista update on 16/09/10

  Since I've updated windows I cannot access my wireless internet connection, however, I am still able to connect via the LAN port.

  If I check my ipconfig it says under the "media disconnected" wireless network connection  I tried to get my IP address into my settings because they seem to have disappeared, but I can't always wireless.  I ran all Windows diagnostic tools, but all say that the internet connection is fine (due to it being connected by the LAN port).

  I also tried to fix it by other solutions on this forum, that is

  • Open Set Up a Wireless Router or Access Point by clicking theStart button, clickingControl Panel, clicking network and Internet, and then clicknetwork and sharing Center. In the left pane, clickset up a connection or network, and thenset up an access point or wireless router.

  The result of the message is ' Windows has detected network hardware, but it cannot automatically configure "and when I try to manually configure the server requires a user name and password which I don't have.

  Please could shed you some light on this case for me?

  Thank you very much

  Hello

  I tried everything above without result.  However, I managed to reinstall my wireless router software after having repaired my DVD driver software.  I restarted my computer and Wireless does not work.  Reinstalled the software new and restarted the computer, and then after a short period of time the computer connected to wireless internet!  Not know not why the remedy has been delayed or why it did not work after the first attempt, but it connects wireless now - what I know is that this problem occurred after an update of Windows, it's a shame that Microsoft failed to address this problem as it was their update it as many other people have also claimed.

  A big thank you to everyone who offered advice.

• Unable to connect to wireless internet, also infected by the Virus on the computer.

  Original title: got a "Guid_MFE_CONNECT_CALLOUT_V4" problem using windows vista OS

  Hello:

  Unable to connect to the internet.  Using a wireless adapter on this computer.  Tried, connect directly to the router with cables.  Had a virus that affected anti -.

  anti-virus software.  Uninstaller for Windows did not remove all antivirus software.  Computer won't let not the admin deletes the folders on drive "C" where are the files of Kaspersky Anti-virus.

  Any help out there.

  Ty

  Hello

  You can try to boot to the desktop in Safe Mode with networking and check if the problem could be solved.

  Follow the link for starting office in Mode safe mode with networking Option.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

• Unable to set up a home network with XP

  Hello
  Tried to set up a home network, I'm having no success.
  My dektop running XP Home Edition and connects on a Belkin N wireless router, which in turn connects to a cable modem for internet access.
  I managed to put in place 3 laptops (1 on XP, 1 on Vista and 1 in windows7) to access the wireless internet via the router.
  I had expected given the Office a central store for music and images and allowing laptops to access the information about it, but no matter how I try, I can't the Office to see laptop computers or laptops to see the desktop. The router DHCP information lists all the PC when connected.
  I am at a total loss, could someone please?
  Concerning
  Yianni

  What antivirus is installed on your computer? Disable the and their firewalls including windows firewall

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/
  http://Windows.Microsoft.com/en-us/Windows-Vista/join-or-create-a-workgroup

• Unable to connect to wireless internet at home and cannot renew IP address

  Here's the question:

  I have a few years old Toshiba Satelite laptop with Windows XP SP3. I recently took my office where he has been on the internet via an ethernet cable in the living room where I tried to connect to my wireless internet. It would connect, but says he has "limited connectivity or not." Perfectly fine, I can connect to my neighbor's wireless internet, my wife has the same computer exactly like me and connect to our wireless internet and the neighbour, and there is absolutely no problem with the intensity of the signal. I ran ipconfig and that's what he said:

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : gateway.2wire.net

  IP address.  . .  . . .  .  . . .  . .  : 192.168.1.64

  Subnet mask. .  . .  . . .  .  ...: 225.225.225.0.

  Default gateway.  .  .  . .  .  ...: 192.168.1.254

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. :

  IP address.  . .  . . .  .  . . .  . .  : 192.254.204.90

  Subnet mask. .  . .  . . .  .  ...: 225.225.0.0.

  Default gateway.  .  .  . .  .  . . . :

  When I just go to the login information and press 'Fix', it tells me that "Windows could not finish repairing the problem because the following action could not be completed: renewing your IP address."

  In addition, I don't know if it's important, but I have DSL service from AT & T with an AT & T 2Wire Gateway. If anyone has any ideas or ideas that could help me, please let me know. Thank you

  Well, I don't know what was wrong, but I got it working now. I just uninstalled and reinstalled all software or drivers or something that had nothing to do with wireless internet and it is now everything works fine.

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• Unable to connect to ANY internet browser after update Firefox? fake

  I can't connect to any internet browser today. The only thing lately has had many requests for updates to Mozilla, which I approved as I thought they were legitimate. Guess maybe not. How can I get rid of this probable virus without an internet connection? Any help much appreciated.

  Thanks Matt_G but my other laptop connects fine to the internet so it's not the carrier, wireless, modem, etc. In regards to the IPS, firewall, etc., none of this has changed since I have finally used internet on this portable 2d there are. I run my antivirus AVG, and so far, no estimated. Im not sure why Id have a problem suddenly Windows either unless it's a virus / similar. I suppose that the patient enough to take it to a computer place.

• BlackBerry Z10 unable to connect to my internet service providers

  Hello

  It's my story with my new Z10 camera:

  I bought a unlocked BB Z10. After that I went home, had a micro SIM so I just skipped this step. I was playing around with my camera and after that I found the update option in the settings I have improved the device to the 10.2.1.1925 OS version and the version of the 10.2.1.537 software.

  The second day I went to my cell phone provider (Orange Romania) and got a new SIM card for my device. "After a few days, I noticed that in the installer-> networks and connections-> Mobile network, there is a warning message:"the SIM card is not compatible"and the selected connection is said: orange 3 g - only voice".

   

  

  No matter if I chose manual or auto selection mod, I only got the voice without internet option option.

  After asking orange.ro forums support, I got the answer that I might have a faulty SIM card or my phone is locked on the other provider. My phone is unlocked, as you can see below:
  

  

  I went the orange shop the next day and asked for a replacement SIM card. After the installation of the new SIM, nothing has changed.

  I'm a little desperate, everything works, vocal, internet calls over wifi, but not the internet of my cell phone provider.

  Help, please

  Thank you

  That looks like a thing of network for me. The SIM card is limited by the way it is implemented in the system and it seems that yours might only have voice. I really call your provider and handed them to zero and all check. Sometimes, even if she says that you have this or that, he actually maybe not here. It happened to me in my work several times before. Plan said data are there, the paperwork said it has been activated, but nothing works. Only after I asked a network reset/re-provision begins all this work.