Cannot install the printer HP 5600 Series on Windows 8

Similar Questions

• Cannot install the printer HP LaserJet 2300 on Windows 7

  original title: I have a question

  Morning

  I tried to configure my computer to 32-bit windows 7 on Hp LaserJet 2300 printer, but it does not work. Please help me

  Did you get the drivers from here?

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=238802&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=238800

  Otherwise, you have to...

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Cannot install the printer HP C4500 on Windows 7

  Cannot install the printer HP C4500 on Windows 7 - printer installation disc only supported by xp and vista.  What should I do?

  Yes, your solution worked, and I was finally able to connect my C4500 printer as wireless.  Thank you very much for your help!

• Cannot install the printer. The print processor is not (winprint)

  According to the scenario:

  DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.

  DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.

  Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.

  I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.

  I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.

  The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.

  There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.

  Is there anything I can do to get the job to the printer on DC2?

  (And for those who ask why install on a domain controller, there is no member server in this site).

  Thank you

  Hello Josi,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• "Cannot install the printer. Operation could not be performed. error 0x000003eb.

  I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum.  I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan.  I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?

  Hello

  What is the exact model of the printer number? I suggest you to check if the printer is compatible with Windows 7: http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx If the printer is compatible, then uninstall all the drivers connected the printer to the computer, download the latest drivers from the website of the manufacturer, the install without connection to the printer. Connect the printer when it prompts. If the problem persists, contact the printer manufactrer for assistance http://support.en.kodak.com/app/contact/selected/true For more information see: http://support.en.kodak.com/app/answers/detail/a_id/1258/kw/Unable%20to%20install%20printer/related/1/selected/true Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• install the printer driver HP Laserjet 1020 windows 7

  Hi all

  I am here to share my idea to install the printer hp laserjet 1020 in windows 7.

  There no driver for windows 7 until mid-November.

  I installed the driver for laserjet 1020 on windwos 7, here is the method to install the driver of windows 7 for laserjet 1020.

  1. 1st download all laserjet 1020 base of the printer driver for windows vista. You can it to the bottom of this link

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategor y? product = 439320 & lc = en & cc = us & dlc = en & lang = en & cc = us

  2. After you download the driver for vista check it out same exe file with winrar and then go to Device Manager, then HP laserjet 1020 which is indicated as a device unknown and do right click on it and after this update the driver

  3 and after that go to the folder where extarct vista driver exe and select it.

  novel I ran no exe file.

  Thanks for reading. hope it will work for you

  4 and it will be installed without any problem like me.

  take care of all.

  Mokhtari

  Edit by Katie_H: fixed broken link

  Hello, again and again

  Here I downloaded the HD video to see better the HP Laserjet 1020 driver Windows 7

  If you have any questions please conatact me through yhis post or respond to it.

  Is this useful? Please let me know

• LaserJet P3010: Cannot install the printer. The print processor does not exist

  I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

  Problem solved. Use another port.

• Cannot install the printer Hp laserjet 1020

  Original title: cannot install my printer

  I bougth a new computer with windows 7, I try to install my priter hp laserjet 1020 I have the instalation disk but the computer can not find the driver, so I download the driver from the web page hp, but also the computer cannot read o found when the web site hp say's it

  Hi Michael,
   
  In addition to the suggestion of Palcouk, follow these steps and check if they help.
   
  Step 1:
   
  After you download the drivers from the manufacturer's website, right-click on the Setup file and run as administrator.
   
  Step 2:
   
  Temporarily turn off UAC (User Account Control) and try to install the driver.
   
  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
   
  Drivers download for HP LaserJet 1020 printer
   
  Printer HP LaserJet 1020 (32-bit driver)
  Printer HP LaserJet 1020 (64-bit driver)
   
  Also, be sure to have a look at the installation procedure.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot install the printer HP officejet 4500 Windows 7

  Original title: HP officejet 4500 printer is not able to install successfully on windows 7 64 bit ver

  Good day to all,

  I have a printer above that connects port router thro is not able to install successfuuly using portable computers that are running windows 7 64 bit ver, uninstalled hp program and delele registry still same.i have try vista laptop with a utp cable from office windows xp and laptop wireless with the computer it works fine. Pls help and your promt response is very much appreciated.

  Moved from Vista devices and drivers Forum.

  Hi Benoit,.

  Good day to you and thank you for posting your query in Microsoft Community.

  I understand that you are unable to install the printer on Windows 7. I'll be happy to help you with your query. However, let me ask you a few questions;

  1. What happens when you try to install the printer?
  2. You receive an error message? If Yes, what is the exact full error message?
  3. You try to install the printer for the first time to Windows 7?
  4. Remember to make no change in the computer before the show, if it was installed before?
  5. What is the brand and model of the computer?
  6. You are able to install the printer to Windows 7 via USB cable? If not, what happens when you connect the printer (via USB) to Windows 7?

  There could be various reasons that you can not install the printer. There could be a possibility if you try to connected the printer for the first time, you need the printer software. If it has been installed in the past, it could be any conflict of third party software. Let's try the methods below and check.

  Method 1: Download and install the latest software of the printer from the printer manufacturer's website and check.

  Enter the exact model and series type the following link and install the printer software.

  Driver downloads &

  Method 2: There are several ways to connect a printer to your computer. An option that you choose depends on the device itself, and whether you're at home or at the office.

  Please see: install a printer

  Method 3: If the printer has been installed in the past, perform the clean boot in order to avoid any conflict of third party software and check.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  From now on, try the methods above and let us know the result as well as the answers to the questions. We will be happy to help you further.

• I have windows 7 ultimate. Cannot install the printer hp psc software 2410. How to rectify

  My laptop says cannot install the software. I tried all help. Unable to resolve.

  Hello

  According to the HP.com website, your printer driver is installed via Windows Update. The HP document that describes this process can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4063&product=303753&sw_lang=.

  Basically, you need to leave the laptop to start the Add New Hardware Wizard. You can facilitate this by going to control panel, select devices and printers, and when this window opens, select Add a device. Make sure that your printer is connected to your computer via a USB cable, the printer, before to start the wizard.

  Let me know if this helps you.

  Kind regards

  BearPup

• I have an Emachine and a Brother printer, cannot install the printer

  I have an Emachine with Vista, AVG security.   Had a Brother printer.  Printer has worked one day, wouldn't work next day.   Computer won't let me uninstall or reinstall, nor can I do a backup now.   Took and said it was the printer, the new printer, same story.   What is going on.   I am po'd when I call a number of aid and get some yahoo in India.

  Hello

  1. what exactly happens when you uninstall and reinstall the printer?

  2. you get any error message?

  3. how you try to install the printer drivers? (With the help of CD or by downloading the driver)

  4. What is the number of the printer model?

  5. What is the model number of the printer that you bought?

  6. How are you trying to backup?

  7. are you any errors during the backup?

  Please see the article mentioned below.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001500/000009/faqp001509_000.html?reg=us&c=us&lang=en&prod=ql1060neus

  Please download the removal of printer tool suitable for the model number of your printer

  Click on the link below.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001400/000038/faqp001438_000.html?reg=us&c=us&lang=en&prod=ql1060neus&cat

• Cannot install the printer wireless with error code 0 x 00000643

  Original title: error0x00000643 on the installation of the printer

  try to install printerget wireless to the final installation and getting the error 0 x 00000643. Windows Vista 64-bit

  Hello

   
   
  Thanks for posting your question in the Microsoft Community.
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
  (1) did you of recent changes to the computer before this problem?
  (2) what is the brand and model of the printer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  I suggest you to install the printer in clean boot mode.
   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Method 2:
   
  Install the latest drivers for the printer from the manufacturer's website and check if that helps.
   
  OR
   
  You can also uninstall the printer using the network browser and install it again.
   
  To do this, follow these steps:
  a. open the network and sharing Center. To do this, type Network Center and sharing in the search box and then click Network Center and sharing in the list programs.
  b. in the pane tasks, click view computers and devices.
  c. find the printer and then right click on the printer to uninstall.
  d. once the printer is uninstalled, reconnect the printer to the computer. The Plug-and-Play service begins to install the printer.
   
  Reference:
  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
  http://support.Microsoft.com/kb/944960
   
   
  I hope that the information above helps you.

• OfficeJet pro 8600: cannot install the printer Officejet pro 8600 on work network using HP on Win10 software

  I've recently updated my Surface 3 pro to win 11.  I try to install my printer using the HP installation software.  He worked with Win 8.1. The software has never been able to detect my printer automatically but in the past I could enter the IP address and it would connect.  This isn't the case, when I select wired connection, it just never fails to give me the opportunity to enter the ip address.  I can install the printer with the help of the W11 Control Panel, but the features of scan if the HP (HP printer assistant) software does not work it is frustrating for me.  Help, please.

  Kind regards

  Michael

  I found the solution to this problem.  You just need to run automatic installation wired function twice and then it will ask for the IP address.  Once I did this and entered the IP address, it worked fine.  It must just be an option to start or appear after a failure.  I had to let it fail twice has been confusing.

  Michael