Cannot install Vista package successful value-added

Similar Questions

• Satellite A100 - how to re-install the package of value added?

  I had a problem with the crash of flashcards since I got my A100 is about 2 years. Today, I finally downloaded the update to the VAP and tried to install it. I received an error message telling me to remove the old VAP first. When I try to do via the Control Panel, the installation program seems to work according to the Manager of tasks (uninstaller?) but the progress bar never changes and the silence as computer advice that nothing is really happening. I tried this twice already, leaving to run for 30 minutes each time.

  I have 3 questions:

  1. can I update the VAP otherwise?
  2. can I solve the problem of flashcard otherwise crash?
  3. can anyone the flashcards explain to me in simple terms? Why are important (or useful)? I don't really understand them and never use them but have heard of problems if they are deleted.

  Please respond in terms of novice.
  Thank you.

  Hello!

  As I know the Toshiba value added Package can only be updated if you first remove the old version. I also recommend this way.
  But maybe you should try to remove the added value package with CCleaner. This program cleans the registry and the system. Then install it and clean the system. After this attempt to delete the VAP.

  The PPV contains the following important tools:
  -TOSHIBA components common driver is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  -TOSHIBA Power Saver controls energy by opting for optimal power settings, if the machine is connected or battery-based knowledge and based on the remaining battery power.
  -TOSHIBA utilities allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel, and select Configuration HW TOSHIBA icon.
  -TOSHIBA utility to password allows you to set a password that restricts access to the computer.
  -TOSHIBA Flash Cards provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.
  -Tool of diagnosis PC TOSHIBA can view a computer based information and diagnose

  Good bye

• Satellite A660 - cannot install the package of added value

  Hello

  For some reason any my wireless didn't work and I discovered that the wireless switch was turned off,

  I tried to turn it on again but the shortcut key for the wireless next to the power button did not work.
  I uninstalled the package of value added and tried to install back value-added package but it was - this

  message from say RegDBGetItem failed (1). and it would not install.

  Is that what I can do without having to install the new os?
  I tried CNettoyez but it didn't work.

  Please help ~!

  I ve reinstalled VAP several times and have never seen anything like it.
  When VAP is removed from the laptop the system must be restarted and then you can install the latest version of VAP.

  Have you downloaded good PPV for your laptop model?
  Are you using the original pre-installed OS that you got with your laptop?

• Cannot install vista SP2. Go back to step 3 of 3 error E_FAIL (0x80004005)"?

  original title: cannot install vista SP2. Resets the return on step 3 of 3.

  I tried to install SP2 for vista, it fails. automatic update failed he proceeds to step 3 of 3 and go back. I tried the manual download, that there is too much. He is gone to step 3 3 100% and then looked back. has given an E_FAIL (0x80004005) error code please help because I can not install msn live messenger without SP2.  I have Service Pack 1 installed.

  IAM running windows Vista 32 bit, home premium.

  Try these institutions.

  http://support.Microsoft.com/kb/971204/

  http://support.Microsoft.com/kb/313222

  Go to control panel-> Windows Update control, click "Edit settings", then select "Allow all users to install updates on this computer" and click OK. Restart, then install SP2.

• Windows 8 cannot install the package redistributable vc 2013

  Hello, for some reason any cannot install the package redistributable 2013 on my windows desktop vc 8.

  I run the file vcredist 64, the pop-up window with show the progress of the installation... and nothing happens, the progress bar stay empty.

  I discovered this problem on behalf of the new SpaceInvasion.fr hammer war game that i download throug steam, after downloading steam tries to install the package redistr of vc and he could not. So therefore I can't start a game.

  Pls Help!

  What can be the problem?

  Hello

  Thanks for the help, but the problem is solved by the system (System Restore) restore to 3 days before.

• Satellite P755-103 - cannot install the package of added value

  Hello

  I recently bought a Satellite P755-103. In order to maintain the updated drivers, I downloaded Toshiba Value Package added to the downloads section of the page Web of Toshiba. (2 times, I'm sure that the driver is for my 64-bit version of Windows 7).
  When I tried to install it, I got the repair and the options remove. Repair gave me this error: RegDBGetItem failed (1). So I removed completely the driver so that I can install it again. During the installation of the driver that I got the same error, so I couldn't install it, so now I'm unable to activate the shortcut keys PVAT gives me access.

  If anyone knows something that might help with this problem please say something, it would be very apreciated.
  Sorry for my English.

  Thank you

  Hello

  Value added package is still listed in the list of Windows software? If so, I would recommend removing it. Then restart your computer and try to reinstall the VAP.

  If it doesn t work I would try CCleaner. That is a nice freeware tool to clean the registry. You can find the tool using Google. Just run the registry cleaner and then you should be able to install VAP.

  Generally speaking, it s is not necessary to update the drivers if everything is ok. If you n t have any problems you can forget about these updates. ;)

• Cannot find v1.2.25 value added Package Windows 7 x 32 RUS

  Where can I find drivers for Windows7 x 32?
  Why should I spend two hours on the internet to find the 'value added Package v1.2.25 Windows 7 x 32 RUS?

  + The message was edited: assignment has been translated.

  I don't understand where is the problem.
  If you visit support Russia Russian page on http://www.toshiba.ru/innovation/download_drivers_bios.jsp?service=RU and I hope that you will find all the drivers for your machine here.

• Cannot install Vista Business on Portege M400 - IDE issues

  Hi guys... I am looking for your help.

  I downloaded all the new Vista drivers avaiable from Toshiba in support of the new installation of Vista business on my old Portege M400, that came preloaded with a version of XP Tablet and kept their loan on a CD.

  I also upgraded the version of the ACPI BIOS to the latest available 3.80.

  I insert the first CD of Vista professional and do a boot. (I also have a n upgrade Vista Business CD but I want to do a clean install).
  I go past the first steps and choose Install.
  I am faced with an error message "no disk has been found. "Click on load a driver to provide a device for installing mass storage.

  Looks like Vista is not able to see the IDE drive to the edge and it's a driver problem.

  I touched the "Rescan" button available on the windows installation and another message appears: "no device drivers were found. Make sure that the installation media contains the correct driver, and then click OK. »

  Currently loaded on the XP: currently loaded poster IDE ATA/ATAPI controllers like Device Manager: "Intel (R) 82801 G (ICH7 Family) Ultra ATA Storage Controllers and primary IDE channel."

  Hard drives shown are: Toshiba RAID SCSI Disk Device LD0

  Pls tell, what new drivers since available downloads of drivers Vista for my model 400 ML PPM40E, should I choose here for my Vista installation recognizes the disk available?

  Hello

  It is very easy to solve this problem.
  If you would look on the page of the European driver Toshiba (Portege M400 section), then you will notice that a RAID driver is available for this model of laptop.

  Impossible to install Vista because it cannot find the HARD drive due to lack of RAID driver!

  You must install the RAID driver first and then you can proceed with the installation of Vista.
  As far as I know the Vista installation accepting the USB flash key you can use this key to include the RAID driver.

  Hope I could give some useful advice.

  Cheers mate

• Satellite L300 PSLB0E - cannot install Vista and Win XP

  Hello

  I have a L300, model number PSLB0E sat. \
  It was originally loaded with vista home premium, but it starts now not at all.
  I made a disc of vista Home premium and the number to go with it, but it gets as far as "windows installation" but then it stops.

  I tried to new hard drive, same loading XP pro not working!
  I think it's Bios, but after the download from Toshiba on this PC and transfer it to a memory stick, my laptop can't see it?

  Please can someone point me in the right direction?

  A big thank you in advance Paul

  Hi mate

  Please check in the BIOS if the disc is visible.
  If so, then set compatible SATA to AHCI mode and then try to boot from the Vista or Win XP disc.

  But if the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and so you cannot install the operating system.

  Check it!

• Equium A100-147: cannot install Vista because of startup configuration problem

  Equium A100-147 (Windows MCE) bought compatible Vista and bought my promised copy of Vista... used Toshiba step by step DVD ROM upgrade and also updated the Bios.

  Tried to load Vista Home Premium and after going through all the steps, it came with this message...
  «Could not update the computer startup configuration - installation cannot go ahead «...»»

  How should I proceed and what is useful to load Vista.
  Thanks in advance for any help.
  Considers that Howard.

  Hello

  How have you tried to install vista on the laptop?
  Have you tried to switch the MCE to Vista or were you running the new clean install of Vista?

  In my opinion, you must perform a clean installation. Don t updated the existing MCE of Vista.
  In such cases, you can join different installation problems

  If you are an owner of an original MS windows XP CD try to run the console of your windows XP CD recovery.
  Demarrer start from the CD at startup, and then press R to access the recovery console after loading the driver.

  In the recovery console, typefixbootand then restart your laptop.
  Then insert your Vista installation and restart.

  This should solve your problem.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Cannot install vista - blue stripes

  Hello I got a problem with my old vista, a few days ago, that it crashed with blue stripes everywhere. I think that hardrive may have been overheated and died... not sure. In any case, it is my problem and what I did about this.

  Vista starts with blue stripes on the screen shows the logo with the loading bar it goes black for 10 sec and then it crashes. I started by reinstaling the OS from the hard disk, which could be unwise. Because when I restart the installation does not start before it crashes again. I tried to run the install in safe mode, but it cannot install in safe mode either. Then I tried to start that installation of vista from a cd still does not... in safe mode or in normal mode. I'm not sure what to do, is there something I can do or is it time to buy a new computer?

  And if I do, he's smart get a new computer now? Maybe there are some new super computers beyond the next corner?

  Hello

  • What is the brand and model of your computer?

  You can follow the steps that can help you solve your problem below:

  (1) use the Windows Vista DVD to start the computer into WinRE.
  (2) in WinRE, open a command prompt. To do this, follow these steps:
  On the screen to install Windows, select the language to install, time and currency format and keyboard or input method options and then click Next.
  (3) click on repair your computer.
  4) click the installation you want to repair, and then click Next.
  5) click on command prompt.
  At the command prompt, type the following command and press ENTER:
  CHKDSK drive: drive/f and chkdsk: / r

  See also:

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  Data loss:

  Caution:

  Reinstall Windows vista cause of data loss that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

• Cannot install Vista OEM after replacement of equipment

  My Dell with Vista system crashed. The motherboard and HARD drive were fried... I have a system that is compatible with Vista and I installed, but cannot activate Vista, with the same vista that was on my dell... How can I get the vista high and active... The system has set for about 6 months.

  It is not possible to activate it.

  "As far as I know it is not OEM".

  Not sure EXACTLY what kind of license it is.

  "About 3 months after using the HARD drive and motherboard fried."

  You cannot use programs to find the key to the race and active system.

  "and the Vista disc has no number on the handle or the case...." »

  You don't have a product key.

  We cannot help you.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro M70-113: cannot install Vista graphics driver and lines appears on the display

  Hello

  I have satellite pro m70-113 with ati x 700 graphics card.

  When I installed vista, he installed the default drivers for the x 700 'mobility radeon x 700-microsft Corp.-WDDM '.

  I've updated the display drivers for vista, that released by toshiba 2 days back... but the driver is not updated to the latest version, only the catalyst control center is installed when I ran the update of the driver of toshiba.

  The problem is that whenever I put my laptop in standby or hibernation and resume... the screen shows thin lines vertical/horizontal... and I can't use the laptop... and I have to still put the system to sleep, just to hope that it is not blocking the screen this time...

  This problem is 25% of the time only when resume...

  This problem is not resolved by the update driver for toshiba has released a few days back... as is not installs the drivers (I can't even install the drivers with the option "update drivers" of Device Manager and select file driver update from toshiba.) It says windows find new driver, but could not install the driver... Contact the manufacturer...)

  This snap shows the problem... : http://img360.imageshack.us/img360/2783/12042007366copyod1.jpg

  I updated the driver from an earlier version of catalyst, as it is downloaded from the ati site before that toshiba has released the update... this time it updates some 8. XXX version but the screen problem remains...

  Second, this update of the driver leaves me not sleep my system... the process starts for a sleep, but go back to the locked screen without making sleep ever... so I have no choice to get stuck with the default Windows... drivers having only the problem of the screen... and not the problem of sleep...

  Anyone here with a solution?

  Thank you.

  Hello

  I have Satellite M70-159 and I noticed the same thing several times. For most Vista works well but I don't remember cases in which the described problem occurs. I was just curious on M70 Vista and have had no time to intensive testing.

  Anyway, it will be interesting to know if you have already updated the BIOS to the latest version 5.10. If this is not the case to do this and watch carefully if the problem persists.

• Qosmio G20: Cannot install Vista because of lack of RAID drivers

  I just bought a version of Vista Ultimate, but I can't install it because I don't have the drivers Raid and BT. When Toshiba will make available?

  A friend of mine installed Vista on his G30 and he used the RAID to XP or MCE driver.
  It worked! I was also surprised, but he managed to install the Vista on G30.
  I know the G30 is not the same thing as the G20, but you can test