Cannot install Vista SP1

Similar Questions

• Satellite P200D - cannot install Vista SP1

  I tried times serval update to Service Pack 1 of Vista. After that time of serval downloads, laptop installs Service Pack 1. After that serval hours windows update gives an answer that update is not possible with a message that is not explained by Windows.

  What is the problem with the update?

  Hello

  If you cannot update the SP1 then your Vista is confused upward or SP1 is already installed.

  How have you tried to update the SP1? Have you downloaded it from the MS page made one then you perform the update or have you used the Windows Update option in the Panel?

  In your case, I recommend to check first if SP1 is installed.
  If it was not installed, then rub the BONE using the free CCLeaner tool.

  If you want to update the SP1 version, and then try again.

  If that does not help then retrieve the operating system using the Toshiba drive and then try to upgrade Vista to the last State.

  Good bye

• Cannot install Vista SP1: Error Code 2

  Each attempt installation of Vista SP1 fails: Error Code 2.  I tried everything that seems relevant on help and Support.

  Doug K

  Hi Doug K,.

  What is the exact error message received when the problem occurs?

  Method 1:

  You can try the steps from the following link and check if it solves the problem:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Method 2:

  You can try the steps from the following link and check if it solves the problem:

  Learn how to install Windows Vista Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Let us know if it helps!

• Cannot install Vista SP1, error 800F0816

  I reset my computer to factory settings. I went on the installation of the updates that come with, until the time came to Vista SP1. I did the thing, he started to install and when it restarted it sent me to the thing system restore and it has not stopped. I was forced to 'pull the plug' and reset my computer to its previous state before installing SP1. Everything was OK until I did my format. Could this be a problem, that I don't have my original graphics card and RAM on my pc (I have them again).

  What else could I give you, so that you can give me the best possible solution. I just want to know where the fault is and how to fix it. Even if I have to buy new hardware or something like that. Could it be, because I did a format and I have all the drivers and other updates, so that my computer crashes after I turn it on in the morning?
  I get error Code 800F0816, when you try to install the Vista SP1
  Thanks in advance
  Andres.
  Edit: The problem Signature:
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1061
  More information about the problem:
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8FE8CDF7
  BCP3: 8BB37A8C
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  I think I still have these files after restoring that describe the problem.

  Hello

  1. are you able to start your computer normally, now?

  2. Once you get the blue screen error?

  3. is your copy of Windows Vista active?

  Method 1:

  Step 1: Perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Step 2: Download and install a stand-alone copy of Windows Vista Service Pack 1.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  Method 2:

  Check the hard disk for errors.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3:

  Check the memory of your computer for any errors.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  I hope this helps.

• Cannot install Vista SP1, error code "WindowsUpdate_80004004" "WindowsUpdate_dt000"

  Summary: I have bad installation of Vista SP1 and would be grateful for any advice, see details below.

  B A C K G R O U N D:

  I am running Vista Home Premium (32-bit version) and I need to upgrade Adobe create Suite 3 (CS3) to CS4. The problem comes from the fact that CS4 requires Vista Service Pack 1 (SP1) and I'm unable to install SP1.

  I really, really want to avoid storing new factory setting and re-install Vista... So, I would be very grateful if there is someone out there who could offer some advice to help me correct my current system with SP1, allowing installation both need the software Adobe CS4. Someone has an idea of what I might try next?

  E R R O R D E S C R I P T I O N:

  After trying to install the Vista SP1, I get the following under Windows Update error code: "WindowsUpdate_80004004" "WindowsUpdate_dt000" Leading to this following error occurs:

  1. SP1 is installed and Vista claims that it is correctly installed (it takes a few hours...)
  2. Computer is restarted and 3 updates are applied to the system. The first of these takes forever and housing is 98% completion for a few hours, not a sign of healty I guess...
  3. Computer is then restarted again (or maybe it goes directly from 2) 3) without a re-boot inbetween?) and now I am facing a window called "Start up repair" telling me "your computer is unable to boot"... here I just have to click Next and the computer now spends in the order of 45 minutes to fix the system. When it's done, Vista starts but without SP1 and Windows journal showing the unsuccessful attempt to install KB936330 entry more an upgrade.

  S Y S T E M C O N F I G:

  • HP Pavilion dv9000
  • AMD Turion 64 X 2 rocessor
  • 2 GB of RAM, 32-bit version of Vista Home Premium, no other OS
  • Trend Micro Internet security (antivirus and firewall)

  Vista updated with all updates high priority, except the following:

  • KB905866, error message "WindowsUpdate_80004004" "WindowsUpdate_dt000"
  • KB936330 (SP1), an error message "WindowsUpdate_80004004" "WindowsUpdate_dt000"
  • KB955430, "WindowsUpdate_800F0825" "WindowsUpdate_dt000" (note the difference)

  W H A T I H A V E T R I E D S O F R:

  Diagnosis of basic computer:

  1. run chdsk: OK
  2. the verification of memory: OK
  3. I also downloaded a Vista recovery disk and booted from the recovery disc. In this mode, I tried to repair Vista, but no error was found.

  I tried to install the SP1 with these configurations, all attempts to exactly the same error as described in detail above:

  • update of the "normal route" via automatic windows standalone
  • Downloaded the stand-alone SP1: unsuccessful (I read somewhere that has helped other users...)
  • disabled wifi: unsuccessful (I read somewhere that has helped other users...)
  • disable the antivirus and Firewall: unsuccessful

  That's all the advice?

  Thanks in advance,
  Peter

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A200-TR6 - cannot install Vista SP1

  I have Windows Update automatically installs updates the value, but it fails to install SP1. Specifically, I had SP1 in my file "Updates on hold" for a few months now, but it never installs. When I try and do it manually (as in by selecting 'Install now'), he goes through most of the process and then said it didn't and he'll try again. It restarts, try to install it again, then after 45 minutes reports that it cannot.

  I remember reading somewhere that it was due to an incompatibility with the driver for the built-in webcam, but there is never presented solutions. Any ideas?

  Hello

  I think that you need to check only this article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/947366

  Welcome them

• Cannot install Vista SP1 - getting error code: 0x800F0826...

  I'm trying to update my computer toshiba with SP1 and SP2 on Vista Home Premium, but I get the following installation was not successful error code: 0x800F0826... Please advise!  Thank you.

  1. it fails during the installation...
  2 - no changes were made to the computer to my knowledge... I was never able to install SP1.

  Windows Update error 800f0826 is displayed when an update for Windows has failed to install and prevents you from installing additional updates. Error 800f0826 does not identify the update that caused the problem. The update that caused the problem will display a different error. This problem affects only the updates for Windows and does not prevent you to install or to automatically receive updates for other Microsoft programs, such as Microsoft Office System. Ref: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-800f0826

  Please check updated code and the previous error and post back with the details of the same.

  Thank you.

• Cannot install Vista SP1 on Equium P200

  Says Windows installs, then stops, starts to set up, but then returns the changes. Anyone else had similar and then successful problems to install. This on windows vista edition Home premium 32-bit on Equium P200.

  Checked for all the updates on Vista, perfectly up-to-date. Also stop Firewall etc. Can someone help with this problem?

  Hello

  It's funny you say that, because my friend has exactly the same problem as you! (but is not on a laptop, on a standard desktop configuration).

  When the service pack installs it checks for incompatible software during installation. What I would recommend would be to backup your data and install Service Pack 1 _directly_ after recovery of product and then install the 3 rd party software you want to install.

  (Especially the burning of programs/language packs being installed), I found that this has harmed the configuration causing the cancellation of the installation.

  If you give that to try and see what happens and if it doesn't work then come back and we can see what it can be.

  When my friend re-installed Windows and the Service Pack because it worked, allowing him to install its own software on top.

  Installation/Recovery > all Windows updates > Service Pack 1 > 3rd party software

  I hope this helps

  Kind regards
  Nukey

• Cannot install Vista SP1 or SP2 for I can develop upgrade to Windows7 as suggested by Microsoft. Get error code 0 X 80073712.

  I currently have Windows Vista Home Premium.
  32 bit OS
  I bought the package of Windows 7 Home Premium upgrade.

  Did you run the Advisor? - http://windows.microsoft.com/en-US/windows/downloads/upgrade-advisor

  Regarding the Vista error code:

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
  http://support.Microsoft.com/kb/957310

  TaurArian [MVP] 2005-2010 - Update Services

• Has managed to recover from the infinite loop restart Vista SP1 "configuration updates stage 3 of 3 0%"- but Windows Update always wants me to install Vista SP1!

  WIndows Update asks me to install Vista SP1. I did and got into the infamous infinite loop of SP1 (infinite loop ' configuration updates stage 3 of 3 0% "with Vista SP1). I used F8 to repair my computer, and I chose a restore before the SP1 update point has been installed. The restore point has been applied successfully, so I have the computer in the back. Super. However, Windows Update wants me reinstall Vista SP1. Needless to say, I am reluctant to do so. But I want to be aware of the Windows updates. What do I do? TIA

  (With the help of Vista Home Premium)

  This gives a whirlwind:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. right click on the file that you saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. ensure that the http://support.microsoft.com/kb/955430 and http://support.microsoft.com/kb/947821 have been installed. (If they were, they would belong to installed updates. If they don't, try to manually download/install.

  6 test cycle.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I had problems to install Vista SP1 on different computers 2 Scared of Vista SP1.

  I had problems installing Vista SP1 on 2 different computers and have had to reinstall OS and at the same time, after the reinstallation of Vista, Windows update has updated all the updates up to SP1 and I'm afraid to click on it.  I just finished rebuilding my laptop and all important updates and stopped at SP1.  I ran the System Readiness tool update on my desktop and am really GUN-SHY click on SP1.  Is there something else I can look for or take into account before clicking GO?  I was really upset when the laptop was working fine without it and against my instinct clicked on install when Windows update finally offered it.  I was surprised, that he had not come forward.  I have HP Pavilion, AVG and it is on both machines.   On the desktop I had updated SP1 when it first came out, and something zapped my video card and had to install a video card to see what was going on.  Finally I had to buy another HP motherboard.  It was not cheap.  I'm really scared to click on install. And I would like to put into practice what I preach to end-users, but experience twice shot dark me and path of restoration.  Thank you.

  I'm back - I'M MY technician.  I support experience dating back to the beginning of the 1990s.  I tried your advice and humiliated.  What I have to lose - I said. If this does not work, I'll reformat and start over.   here goes.

  I reformatted, reinstalled OEM in new condition.  Bypassed the Code Purple HP tattoos on their generation, where we replaced the MB that I had.
  Uninstalled Norton, installed the Norton remover.
  Installed MS Security essentials.   Yet once, I said why not.  try it.
  Installed all the updates that Microsoft had to offer.   Have to him. I said.
  It took almost two days.
  System has all updates included SP1 and SP and anything withdrew automatic update of Ms.
  Ok.
  browser, flash, drivers, software for personal use
  System is being run-
  Scanned primary and any secondary t.o.d. after reconnecting them - disconnected for the reformat.

  There are other questions which seem to me with ISP but I meet with them, or open a new question.  For now, Vista SP1 and 2 are in.

  Oh and if anyone has a HP, which gets a code purple error after entering the process of restoration - Shift and F10 while the purple error code is on the screen and rename files from HP in the form of command prompt to convey this purple code and continue with the installation.  I had to find this info on the site of HP after the first reformat.

  and another thing.  I had to take my firewall router a notch to allow download of the Norton removal tool.  Why they still use FTP for one simple download is beyond me.  -

  Nice day

• Cannot install vista SP2. Go back to step 3 of 3 error E_FAIL (0x80004005)"?

  original title: cannot install vista SP2. Resets the return on step 3 of 3.

  I tried to install SP2 for vista, it fails. automatic update failed he proceeds to step 3 of 3 and go back. I tried the manual download, that there is too much. He is gone to step 3 3 100% and then looked back. has given an E_FAIL (0x80004005) error code please help because I can not install msn live messenger without SP2.  I have Service Pack 1 installed.

  IAM running windows Vista 32 bit, home premium.

  Try these institutions.

  http://support.Microsoft.com/kb/971204/

  http://support.Microsoft.com/kb/313222

  Go to control panel-> Windows Update control, click "Edit settings", then select "Allow all users to install updates on this computer" and click OK. Restart, then install SP2.

• Samba75 USB Modem GPRS/EDGE cannot connect after installing Vista SP1

  Hi all

  I have a laptop under Windows Vista Home Premium. I can't connect to the Internet using my right to Samba75 USB GPRS/EDGE modem, once I installed Vista Service Pack 1.

  Any idea on how to solve this problem? Because of some network security options has been added by SP1 of Vista who refused to connect me with my modem?

  Kind regards.

  Hi Ken,

  Thanks for the reply.

  I found that the services required to support the diap network are some corrupted how (in other words, when you enter Services, you can start/stop/restart the service. all options is disabled). I'm not looking for is the first cause, but I think so. FYI, I already turned off all firewalls including Windows Firewall.

  I will fix this by reinstalling a new copy of Vista. Tired of the trousbleshooting.

• How to install Vista SP1 after that 947366 troubleshooting has failed?

  I have Vista Home Premium 32-bit. I want to install SP1 (and, eventually, SP2 before the April deadline, deadline of 2010). I tried the "Windows Update" - it did not work. I downloaded the installation manual - it did not work. I tried searching for an answer in the forum "Install Vista, upgrade and Acivate", and Mick Murphy (Microsoft Partner) referred me to this forum, the forum "Windows Update". This is probably the right forum to deal with SP1 installation problems vis a vis Vista. Could someone please offer some advice on what would be my next step in the installation of Vista SP1 32-bit? To be more precise on the substantive contribution: I met this http://go.microsoft.com/fwlink/?LinkId=101139link, which redirects to this link http://support.microsoft.com/kb/947366and this link 947366 is where I went through resolution 1 to 4 of the resolution in a vain attempt to get SP1 installed on my computer. In other words, I've tried every resolution 1, 2, 3 and 4 and each result is a pop-up window evoking me the 101139 link. ATER each resolution has failed, I reached the bottom of 4 resolution follows her where:

  Note If the problem is not resolved, this content cannot help you. So, you might want to visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/contactus
   
  which of course makes back off the screen of troubleshooting altogether. I tried to call Microsoft and their lines are busy all the time. I hope that someone else has experienced this similar problem. I did much research on Google, nothing helps. I hope someone in "Microsoft answers" can provide a response to my "question of Microsoft." Again, my question is: what should I do to get SP1 is installed if resolution 1 to 4 of the resolution at this link http://support.microsoft.com/kb/947366 failed? The above is the most accurate description of the problem that I can provide, including the specific error codes and I have already taken measures. Please please please help!
   
  Thank you!

  Paulbyl,
  I suggest that you first run the disk error check and make sure your player is no problem.  Then, run the System File Checker to check for problems with the system files.  If he can find and correct and rerun the System Update tool .  At this point, you must perform a clean boot , and then try to start the installation of stand alone for SP1.

  If SFC finds issues it cannot fix you will need to perform an inplace of Vista upgrade.  Follow the steps described in this article.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Vista Service Pack 1, error 8024200d.

  Original title: cannot update

  I get the error message 8024200d message when I try to install Service Pack 1 for Vista.  I did try it again 3 times with no luck.  I have the update in order to install my new Cisco router.  Help, please.  Thank you

  Hello!

  Error 0x8024200D SUS_E_UH_NEEDANOTHERDOWNLOAD code
  The Setup program requires more data to download

  Translation: Everything you are trying to install, your machine needs some
  other updates to be installed first.

  Try to download Windows Vista SP1 form this link:

  http://www.Windows.Microsoft.com/en-us/Windows/downloads/service-packs?WT.mc_id=MSCOM_EN_US_DLC_HIGHLIGHTS_131W4ENUS21980

  Click on Windows vista, the former services Get packs free of charge and chose the 32-bit or 64-bit depending on what version you have.

  To check

  1. • Open the Windows 'Start' option and click on 'control panel '. Click on "System and Maintenance", then select "system". A new window opens.

     • 2

       You should see 64-bit or 32-bit under 'System' in the new window. If you use a 32-bit system, you can find out if your PC is capable of running a 64-bit system. To find out if your computer can run a 64-bit system, click again on "System and Maintenance" in the control panel and select "information on the performance and tools." Spearhead of a new window.

     • 3

       Click on "View and print details." You should see the operating system that you use under "Type of system." You will see "compatible 64" if it is 64 bit

  Tell me if this helps