Cannot install Windows 7 on an all-in - One HP 1105

Similar Questions

• Cannot install my Lexmark 8300 printer all in one

  Cannot install my Lexmark 8300 printer all in one

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US%20&segment=download

  Read the above, after typing in a Lexmark 8300 printer:

  Please start typing your model number to find your product.

  Please try again. There was no product found for this model:

  Printer Lexmark 8300

  Select

  Contact Lexmark

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install Windows 7 error "partition must contain one or more dynamic volume...". ».

  I have windows 7 installed on my pc.

  When I updated my system driver in Device Manager, he demanded to restart.

  When I restart my pc, it does not restart "windows error recovery".

  I tried every possible means to recover my pc, but all fails.

  Finally, I tried to reinstall windows 7

  but, when all the files have been expanded

  After that, he says "windows cannot update Installing boot configuration could not proceed.

  but I am able to start mu computer through safe mode.

  company-hp

  model No. - p6-2020ix

  pls hel me out.

  Original title: partition contains one or more dynamic volumes

  Hello

  Rather than create new threads for each answer, I suggest you post your reply in the main thread. This helps help you the better.

  For your reference, the original thread is:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/partition-contain-one-or-more-dynamic-volumes/c3027f83-5f02-4dd2-802b-2e3d4314edc6

  (1) what is the complete or exact error message?

  (2) what is the serial number and the model of the hard disk on which you try to install the Windows 7 operating system?

  Note: Dynamic disk function is not supported for editions of Windows 7 Home Premium, Windows 7 Starter and Windows 7 Home Basic.

  (3) what is the edition of Windows7 installed in the computer?

  Try the methods suggested in the article below and check after each method:

  You cannot select or format a disk partition hard when you try to install Windows Vista, Windows 7 or Windows Server 2008 R2:

  http://support.Microsoft.com/kb/927520

  Warning for the disk check: when running chkdsk (Check Disk) disk hard, if bad sectors are found on the hard drive and then chkdsk attempts to repair this sector. And if no data is available on this sector can be lost.

  Warning in the BIOS: Basic Input Output system (BIOS) to change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful.

• Cannot install the driver for HP all-in-One Printer

  I received a message "Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file. "I have uninstalled/reinstalled, downloaded updates etc, and HP has attempted to resolve my problem nothing works remotely. Why? Simple answers please!

  Get a new copy of the software from HP.com (you don't mention that you AIO so I can't give you the exact link, but click on drivers & Software on the HP site and enter the exact model of the printer, then download the version for Vista 32 or 64 bit, depending on what you have).  Use the option to save to your computer.  Don't forget where you download it.

  Navigate to the file, right-click on it and select run as administrator.

  You should now be able to do everything that your printer is capable of.

• Scanner - cannot install wireless HP 8500 printer all in one as a scanner

  The print on my home wireless network, but the system does not see it as a scanner and I can't find a way to do it.

  Help.
  Please, I beg you.

  You have installed the drivers from here?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3752459#n205

• ink cartridges cannot install in my new hp7520 all-in-one.

  I just opened my new hp7520 and during the stage of configuration to insall the print head cartridges will not move out of the stored postion.  It will not move automatically or manually.  Is there a secret?

  Hello

  There may be a piece of plastic blocking his path. Please watch the following video:

  http://www.YouTube.com/watch?v=gVJoOSE5ldw

  Kind regards

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.

• Cannot install Windows XP update KB2718704; error # 0x800A138F

  Cannot install Windows XP update KB2718704; Get error # 0x800A138F. I would appreciate a mention of help on this issue. Thank you.

  (My Automatic Updates usually work, but this time not to go.) Updates are obtained through IE8 browser, but I prefer FireFox for daily use.)

  Thank you! Success!

  I used method 2, because I had already tried method 1 earlier, but the "fix it" went wrong. After reading the information from method 2, I opted to use my FireFox instead of IE8 browser, because I suspected that the process Internet Explorer that are included with the update was a large part of the cause of my problem. Among the options, I used Microsoft Download center to locate the update I needed and then through its validation and finally made the download and reboot. Voila!

  Can you please explain why the process more automated via IE did not work for me? Why I resorted to the labour process more that I used? Can I expect this of all the other "critical" updates that I get on my machine Windows XP Media Center Edition 2005? Maybe your answers would also be interesting to others.

• Cannot install windows 7, error: Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Original title: Install windows 7 on GTP style partition

  Nice day

  I try to install windows 7 on my laptop but there is a massege
  Say cannot install windows on the selected drive cos it's GTP
  Partion of style, I was using before windows 8 but then format
  My hard drive please guide me on how to archive this because only through
  I'm really frastrated

  Hi Nnrmalata,

  1. you are trying to install 32-bit or 64-bit Windows 7?

  2. What is the brand and model of your computer?

  Boot from GPT is only supported for 64-bit of Windows 7 on UEFI-based systems.

  For more details, refer to this link:

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  If your computer does not support UEFI, back up your important data to an external drive and delete all partitions on hard drives and create a new partition.

  (a) start from the Windows 7 DVD

  (b) click on install now

  (c) in the configuration screen, click Custom (Advanced)

  (d) click on drive Options

  (e) select the partitions to format

  (f) click on Format - this will erase EVERYTHING on this partition

  (g) create a new partition, and then select a partition to install Windows on.

  (h) follow the on-screen instructions and install Windows.

  Note: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  You can check the link for reference:

  http://TechNet.Microsoft.com/en-us/library/dd799232 (WS.10) .aspx

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If above did not help, please refer to the steps in this link.

  Note: Backup your important data to an external drive

  Change a Table of Partition GUID drive on a main boot drive

  http://TechNet.Microsoft.com/en-us/library/cc725797.aspx

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• Cannot install Windows server 2012

  Cannot install Windows server 2012. Whenever I get * error

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error code: 80246007 (cannot install Windows Live Essentials 2011)

  I don'tseem able to install updates automatic, quest is my wide ban and they switched to norton antiviris of a care of windows live, had problems since I went.  Cannot install windows live essentials completely, still the same code error 80246007.

  I already changed the setting in "bits" to allow updates to day and downloads by following the instructions in the help, no change can not load low HP Essentials * msi.