Cannot install Windows Update to KB2698023 three times.

Similar Questions

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• Cannot install Windows update - error 8007003 - updated fails repeatedley

  Cannot install Windows update - error 8007003 occurs whenever I try to update

  Would have been nice if you included the Windows operating system you are using, but nevertheless (pick that applies to you).

  Windows XP

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Vista

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you try to download updates from Windows Update on a computer that is running Windows Vista: "error 0 x 80070003 the system cannot find the path specified."
  http://support.Microsoft.com/kb/942967

  And here's one for Windows 7

  Windows Update error 80070003
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install windows update kb969947 error code 800F0816

  Cannot install windows update kb969947 (for vista) everytime I try after that restart the computer should go back to a previous restore point to operate

  error code 800F0816

  See the section "How to get help" of http://support.microsoft.com/kb/969947

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install windows update kb2686509

  Cannot install windows update kb2686509

  Hi marksherick,

  If you are unable to install KB2686509, follow the steps described in this document that is specific to not be able to install this update.

  You can also try the following troubleshooting options described in the links below:

  Reset the Windows Update components

  You cannot install some programs or updates

• Get the error code 641, cannot install Windows updates.

  Reluctant to do a reinstall of windows.  I had the same problem, find the same useless information on a cure.  I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not.  Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.

  I wonder if Apple has this kind of problem?
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/get-error-code-641-cannot-install-windows-updates/c3f6c853-10e9-4585-b941-f960e02cf9a4

  Hello

  I suggest to reset the Windows Update components and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Let us know if it helps.

• My laptop cannot install windows update. Error found: 646

  My laptop cannot install the update to windows. Error found: 646

  For error 646, it's popular-

  http://support.Microsoft.com/kb/2258121

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• 0x8024400A error, cannot install Windows updates.

  Original title: error cannot access windows update

  0x8024400A error message

  Hello

  1. you have any application installed on the computer security?

  2 did you a recent software or changes to the material on the computer?

  I suggest you run the FIXIT from the link below and. You can also try other steps listed in this article.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  Hope this helps and keep us posted.

• Error 0 x 80240036, 0x8024400A, cannot install Windows updates

  Original title: cannot access windows update Center to down load my updates.

  I keep getting these two error messages whenever I try to install windows on my computer updates.

  I have windows XP Home Edition

  Error number: 0 x 80240036

  Error number: 0x8024400A

  Thank you, Bob Taylor * address email is removed from the privacy *

  PS I'll install a new windows XP on my hard drive now. Who could do

  Hello

  Have you done a recent software or changes to the material on the computer?

  I suggest you to check the updates could be the cause of the problem. To do

  (a) go to control panel,.

  (b) click on Add/Remove programs.

  (c) scroll through the list of programs, and downstairs, you will find all the updates that are installed with their numbers categories.

  Provide us with the number if the issue not be resolved after following the methods.

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Try installing updates and if the issue gets not solve, go to the method 2:

  Method 2:

  If the problem is not solve I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  
  How to back up and restore the registry in Windows

  And take note: While running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost.

  Method 3:

  You can also try the steps from the link below if the above methods fail. Run the FIXIT and if it does not help, try the manual steps.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• Cannot install windows update, error: updates have not been configured correctly. The system then returns

  Original title: Windows updates fail to configure.

  I wonder to install Windows updates. I do and I am told they have installed.  When I have to restart my computer, I get a message that the updates have not been configured correctly. The system then returns. Next time I turn on the computer I get a message saying that updates have not been successful.  This has happened for months. I think that my computer is very slow because of it. I also think that my computer is a little short on memory. It is an Inspiron 530 with 1 GB memory

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  I hope this information is useful.

• Cannot install windows update, error: configuration of updates. Step 3 of 3. 0% complete. Do not turn off your computer

  Original title: My laptop has frozen all by installing a Windows Vista Automatic Update

  My Samsung R70 was installing an update when it stuck on a screen saying, "Configuring Updates. Step 3 of 3. 0% complete. Do not turn off your computer. "After several hours, I turn off my laptop and since then I tried to open safe mode. I removed the battery and let the power drain before restarting and I also tried to startup, Samsung II of the recovery and restoration of the system repair. Nothing works! When I start I get the same "Configuring Updates" screen and I can't get in front of her.

  Someone at - it ideas? Thanks a lot in anticipation!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  Hope this information is useful.

• Cannot install Windows updates. It hangs at 0%.

  Original title: Windows update is running is not on a computer brand new out of the box for Christmas :(

  New Asus desktop computer, win8, suppose to be able to go to 8.1.  The first thing I try to run windows update, first he said windows update must be updated, OK, whereas he is 118 updates, but when I click Update or install nothing happens.  I reboot, it will but KB/% download remains 0% as more than an hour, so its not really?  I tried only selection 68 updates, same thing.  The service runs, I've never seen a new computer does not work, it was for my children and I am very disappointed.  Can it be fixed or do I return it?

  Joy

  Hi Joy,.

  Thanks for posting on the Microsoft Community.

  I'm sorry to know that you are unable to install Windows updates. It could be due to issue with windows components or services.

  1. What is the brand and model of the computer?
  2. Did you do changes on the computer, before the show?
  3. You receive an error when updates fail to install?

  You can try the methods below and check if help.

  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  I suggest to use the windows update to convenience store and then try to install the updates.

  Method 1: Run the Windows Update troubleshooting tool.

  Windows Update Troubleshooter
  http://go.Microsoft.com/?linkid=9830262

  Method 2: Try to install the update by placing the computer in the boot.

  A clean boot helps eliminate software conflicts and determine what is the cause of the problem. Perform a clean boot on the computer by following the steps in the link:

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, consult this "How to reset the computer to start normally after a boot minimum troubleshooting" section in the link above.

  Additional information:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-8/troubleshoot-problems-installing-updates

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• Windows 0x80072EFF - cannot install Windows updates

  original title: help me please

  I get this error error number: 0x80072EFF. How can I solve this problem? When I go to the windows update Web site it says page cannot be displayed

  In the order shown, do not jump...

  First of all - download, install, operate and put to update and then run a full scan of the system with the following two (one at a time, reboot in-between):

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Search online with eSet Online Scanner.

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you'll do the aggressive version, not the other):
  How to reset the Windows Update components?

  Reset.

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Reset.

  Try to get updates.

• KB2607712 - cannot install Windows updates

  original title: Re: KB2607712

  I canceled KB2607712.  The Green band that crosses, froze in place, now I can't receive updates from M/S.  What should I do?  Thank you

  Manual steps are in the kb as well however here, they are just in case:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To reset the Windows Update components, follow these steps:

  1. Open a Windows command prompt. To open a command prompt, click Start, then click Run. Copy and paste (or type) the following command in the Open box, and then press ENTER: cmd
  2. Stop the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net stop bits
     • net stop wuauserv
  3. Delete the qmgr*.dat files. To do this, type the following command at a command prompt and press ENTER:
     Del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat.
  4. If this is your first attempt to troubleshoot Windows Update by following the steps in this article, go to step 5 without performing the steps described in step 4. The steps in step 4 must be performed only at the time the Troubleshooting If you cannot resolve your Windows Update problems after following all the steps but step 4. The steps in step 4 are also carried out by the "aggressive" mode of the fix it Solution above:
     1. Rename the following files to *. BAK:
        • %SystemRoot%\SoftwareDistribution\DataStore
        • %SystemRoot%\SoftwareDistribution\Download
        • %Systemroot%\System32\Catroot2

        To do this, type the following commands at a command prompt. Press ENTER after you type each command.

  • Ren %systemroot%\SoftwareDistribution\DataStore master
  • Ren %systemroot%\SoftwareDistribution\Download master
  • Ren %systemroot%\system32\catroot2 master
• Reset the BITS service and the Windows Update service for the default security descriptor. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
  • SC.exe tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  • SC.exe tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
• Type the following command at a command prompt and press ENTER:
  CD /d %windir%\system32
• Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
  • Regsvr32.exe atl.dll
  • Regsvr32.exe urlmon.dll
  • Regsvr32.exe mshtml.dll
  • Regsvr32.exe shdocvw.dll
  • Regsvr32.exe browseui.dll
  • Regsvr32.exe jscript.dll
  • Regsvr32.exe vbscript.dll
  • Regsvr32.exe scrrun.dll
  • Regsvr32.exe msxml.dll
  • Regsvr32.exe msxml3.dll
  • Regsvr32.exe msxml6.dll
  • Regsvr32.exe actxprxy.dll
  • Regsvr32.exe softpub.dll
  • Regsvr32.exe wintrust.dll
  • Regsvr32.exe dssenh.dll
  • Regsvr32.exe rsaenh.dll
  • Regsvr32.exe gpkcsp.dll
  • Regsvr32.exe sccbase.dll
  • Regsvr32.exe slbcsp.dll
  • Regsvr32.exe cryptdlg.dll
  • Regsvr32.exe oleaut32.dll
  • Regsvr32.exe ole32.dll
  • Regsvr32.exe shell32.dll
  • Regsvr32.exe initpki.dll
  • Regsvr32.exe c:\windows\system32\wuapi.dll
  • Regsvr32.exe c:\windows\system32\wuaueng.dll
  • Regsvr32.exe wuaueng1.dll
  • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
  • Regsvr32.exe c:\windows\system32\wups.dll
  • Regsvr32.exe wups2.dll
  • Regsvr32.exe wuweb.dll
  • Regsvr32.exe qmgr.dll
  • Regsvr32.exe qmgrprxy.dll
  • Regsvr32.exe c:\windows\system32\wucltux.dll
  • Regsvr32.exe c:\windows\system32\muweb.dll
  • Regsvr32.exe c:\windows\system32\wuwebv.dll
• Reset Winsock. To do this, type the following command at a command prompt and press ENTER:
  netsh winsock reset
• If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
  Proxycfg.exe d
• Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
  • net start bits
  • net start wuauserv
• If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
  Bitsadmin.exe/Reset /allusers
• Install the latest Windows Update Agent
. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
• Restart the computer.