Cannot install Windows XP after the purchase of disk

Similar Questions

• Cannot install windows updates after the recent update of norton

  Appears to download upodates then it not install them and reverts the changes. Have tried disabling Norton Firewall, but did not work. Someone at - it suggestions? Thank you

  Contact norton support

• 0xC8000247 error, cannot install Windows Update after change of hard disk.

  Error code original title: 0xC8000247

  I just replaced the hard drive in two laptops.  Set to launch on the third.  After replacing the hard drive by using EZ gig cloning software iv install the new drive hitachi that I tried to run windows update and received this error message.

  Hello

  Method 1:

  I suggest you to perform a System File Checker scan.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Note: you may be prompted to insert the Windows Vista installation DVD, if all files are proven to be absent or corrupt.

  Try to install the update once the scan is complete.

  Method 2:

  I also suggest you to follow the steps mentioned in the link and check.

  Follow the steps listed in the article mentioned and check.

  Important:

  How to back up and restore the registry in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  If the steps do not contribute not to proceed to method 3:

  Method 3:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

  Try to install the updates once the installation is complete.

  Hope this helps and keep us posted.

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• Cannot install windows 7 using the uefi on hp laptop

  Cannot install windows 7 in uefi on computer mode hp laptop.

  What is the error you received? Generally the new laptops are designed as is not compatible with windows 7, as a mine.

  When I try to install W7 it up without hard drive found.

• Cannot install Windows 8 on the replacement hard drive

  I got the replacement from Dell hard drive which he said would come with Windows 8 and pre-installed drivers. Well, I installed the hard drive and he said no. OS can be found. I didn't have a chance to make my own backup discs, but Dell sent a CD Windows 8 recovery media with the laptop and now with the replacement hard drive.

  When you try to install Windows 8 on the new hard drive, I get to the part where it tells me to choose a partition to install Windows 8 on and none of them will not let me. There are 5 to choose from and I don't know what to do to get past this. The largest partition either 5A about 934 GB of space left out of 1 TB, but as I said I can't choose it or one of the other ones for the installation.

  You just have to click on next, in any case, despite the message?  Otherwise:

  Start on the DVD of Windows 8, instead of install now, click repair your computer, Advanced Options, invites ... when it opens, type the following:

  DiskPart
  Select disk 0
  clean

  Then, try to install.

  The above will remove all the data partition and disk, allowing you to do a clean install on an empty drive (these scores are not required, and Windows will create its own partitions (two) he needs to install and run).

• Cannot start Windows 7 after the update of the system

  I don't speak of Windows 7 RTM, I know is RC forum but I downloaded the RC of microsoft's official website and I can't install it, it reached the "end of installation"(ou quelque chose comme ça) phase and blue screen of death appears, saying "memory dump" and other things. ". That's why I downloaded RTM from a torrent site, I installed it, everything was fine, the aero was not on so I that I should update the video drivers and then I downloaded all the updates possible (via the control panel), then I restarted the pc and now I am not able to load windows , it's blue screen of death! Notice that I can run windows 7 mode safe mode, but when I try to start it in normal mode the blue screen appears. BTW, I have windows xp installed on my pc as well. So, here is my setup:

  AMD 7750 dual-core 2, 7GHz
  4 GB of RAM, 800 Mhz, but the system says 3.25 alone can be used
  ATI 4730 512 MB, btw I have integrated graphics card (ati hd3200, I think), don't know if it's important but...

  Here is the information about the error:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1026

  More information about the problem:
  BCCode: 116
  BCP1: 871F13D8
  BCP2: 90C204B4
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  F:\Windows\Minidump\080809-15375-01.dmp
  F:\Users\blah\AppData\Local\Temp\WER-22953-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  F:\Windows\system32\en-US\erofflps.txt

  Here's the crash dump:

  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [F:\Windows\Minidump\080809-14921-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.x86fre.win7_rtm.090713 - 1255
  Computer name:
  Core = 0 x 82803000 PsLoadedModuleList = 0x8294b810
  The debugging session: 11:50:54.734 Saturday, August 8, 2009 (GMT + 3)
  System Uptime: 0 days 0:00:19.343
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  .....

  Pirated Windows 7 allows malware, botnet zero-day ZDNet.com.url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Portege M400 - cannot install Windows XP on the new HARD drive

  Hello here is my problem,

  I bought an older Portegre M400 E, without a HARD drive. So I buy a new Samsung 400 GB. I looked in the Bios (ACPI BIOS Version 3.40) and it is ok. He shows me the HARD drive with built in Assign LD - 0 status ONLINE, 400 GB size so it seems to be nice. Changed the matrix Raid, described in the manual, in condition to create 1Raid-0
  So, I want to boot from the Windows XP CD, not recovering my own.

  Windows open to the top and after a short period, the installation ends with the message that it is not any HARD drive. This I try sometimes :-( Hope someone can help me.
  Do not forget that I didn't have any HARD disk with the dates of the laptop.

  Thank you Carsten
  (Sorry my English is not so good Im from the Germany)

  Wilkommen!

  > Changed the matrix Raid, described in the manual, in condition to create 1Raid-0

  I don't know much about your model, but I think that something wrong with the raid in the Bios settings. What other options are available in the Bios for the State of the hard drive? I found the RAID driver on the Toshiba driver page. It is possible, that you can integrate in with a program called nlite Windows installation disc or install Windows as in compatibility mode, and install the Raid driver. then

• Cannot install Windows XP on the Qosmio F50-108

  I got the Qosmio F50-108 with Vista.

  I dislike Vista so I tried to install XP.
  Unfrtunatelly, I get a BSOD every time XP takes over for the first time (startup). Usually, when there is a problem of sata, XP tells you while there's no HARD drive, but I do not get this message, I get a BSOD.
  I don't know why there is no support for XP in fact I know that Microsoft paid toshiba to stop supporting Windows XP.

  Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.

  I know that there is a possibility, I know that an update of the bios might help, but toshiba does not.
  Dear Sirs to Toshiba, I know you know what I have to do in order to get XP running on a Toshiba computer, so please, help me.

  Hi guys

  You can install XP on each laptop Toshiba. But you knew how! : D

  Your Windows XP CD must contain the SP2. This is important because the new laptops no matter which manufacturer need SP2 patches due to some hardware compatibility issues!
  Without the SP2, you will receive a BSOD!

  Then, the new notebooks support SATA drives hard and new SATA controllers!
  Windows XP and Vista operating systems do not contain the SATA drivers, and therefore you must include first before running the installer of the OS.
  Or you can disable the SATA in the BIOS. You will need to switch from AHCI to compatibility mode.

  Then, you must install the XP window successfully.

  So finally, I must say that I really don't understand these comments like this:
  > Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.
  OK, I see you're frustrated because you cannot install the operating system, but he must know that this is not a problem of laptop, but it is only a case or a knowledge!
  So maybe you should learn more about new technologies and you'll know how things are working. ;)

  To all here-> greetings & peace;)

• Cannot install Windows 7 from the external DVD

  I got the Macbook Pro 13 "Early. 2011 Super DVD player has been broken. So, I bought a new hard drive (750 GB) and the original hard drive (320 GB). I change the position of the hard disk, I put 750 GB as the first hard drive and 320 GB as a second hard drive (by using the drive caddy).

  The current operating system is the Version OS X El Capitan 10.11.2.

  So I try to install Boot Camp using Boot Camp Assistant.

  Boot Camp Startup Wizard

  Presentation of the boot - you need an optical drive to install windows, so I plug my external DVD and put it inside the Windows 7 Installer, click on continue.

  Create or remove a Windows Partition - I select Macintosh HD (750 GB) and create a second partition for Windows, press to continue.

  Create a Partition for Windows - resize the disk partition of 750 GB became 498 for OS X and 250 GB for Windows. Tap on install.

  Partition drive...

  After the system restart and boot from external DVD

  The display flashes only _, I waited 10 minutes... does not.

  Reboot again without using external DVD, only a white screen (2-3 minutes) and appear only flashing _

  I tried using

  1 USB key and still the same.

  2. repair Boot Camp after having created the new partition

  3 remove the hard disk and install mac OS X using internet recovery, install OSX Lion, a Lion training camp and try to use refit, does not.

  Can someone help me?

  

• Cannot reinstall Windows XP after the removal of Windows 8. The installation does not complete.

  I installed win 8 January last on a xp pro machine, which was in surplus. I uninstalled the victory 8 and now impossible to reinstall win xp pro

  The computer is a homemade which ran from win xp pro for several years. I installed win 8 trial knowing that it would take a new installation of XP Pro after the expiration of the 8 victory. I have reset my bios on a cd first and started in the installation cd after installing win xp, it went to boot, and the cd has been removed. a restart was launched and he went into the bios to save install and after the robot below the windows splash logo made 3 passes, he stopped at halfway. After this is is spent in attempts to bppting I noticed that whenever the start stopped he left the Num lock, cap lock, and scroll liux lights were all on on the keyboard. I traded my keyboard with one of my current computer and it always occurres. I started to reload several times now and always the same. No bios settings have helped.

  Hello

  Unplug the machine to see if this allows the machine to reinstall the operating system of any material not needed (such as printers, fax, speakers, USB devices (except keyboard and mouse), Internet connections, etc.).

• Cannot install Windows 7 after format install

  I contact microsoft support for installing windows 7 ultimat that I have before i Formate just the hard disk of the computer and I try to install it again. and I can't do it.
  That's why I contact support using the microsoft

  the guy that I scare with him called Mr. Akiles, he faild to do after I paid 149 dolars
  so he transferred me to the 2nd level, then a different contact name Mark Jan B. too after he chating some lins, tell me some body contact me in an hour.
  and I got about 3 hours of waiting. I phone microsoft and it is closd.
  I paid for the service

  I want my money

  See the instructions how to reinstall Windows 7:

  Installation and reinstallation of Windows - Windows - Microsoft help

• Cannot install windows 7 on the computer hp laptop 15 r014tx

  I bought 15 HP r014tx windows 8.1 pre installed I want to downgrade to windows 7 but I can't install it. Please suggest any method to install it. If anyone has the same laptop and install windows 7 Please suggest...

  Hello

  Try this

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.