Cannot launch ManagedServer by using the Console

Similar Questions

• MDS-01401: fails to update the configuration by using the console of B2B

  Hello expert B2B.
  I get the following error applied changes to TP using the console of B2B. I checked the log and it give me any more information than that below. I restarted two weblogic soa breaks, and yet it is to launch the same error.
  
  MDS-01401: update of a node in a single document "/ soa/b2b/tp_MyCompany.xml" with another document node "/ soa/b2b/tp_MyCompany.xml.bak" is not allowed.
  
  ADF_FACES-60097: for more information, please consult the error log of the server for an entry beginning with: 60096-ADF_FACES: server during the PPR, #39 Exception
  
  
  Any ideas on this one?
  
  Thanks in advance!

  I doubt that the B2B repository has been corrupted. Take export from the repository, purge the existing design time repository, restart the server and then import it again. If this does not work, lift a SR with support. You can consider diffusion through your repository B2B export to my id.

  Kind regards
  Anuj

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.

• I need to stop windows to install the IR Transmitter/Receiver when I reboot so I can use the console for Fallout New Vegas

  To use the console or a cheat mode on Fallout New Vegas, I need to uninstall my infrared transceiver. When I do that, I have to restart the computer for the changes to take effect. Once I reboot, windows pops up a window saying that it has installed new drivers. Happens if fast, I can not open the game before the pilot completed the installation. Help!

  Hello

   
  If you want the windows do not install the infrared transmitter when Windows restarts you can remove the connection of the transceiver to the computer or try to disable it in Device Manager. You may consult:
  
  (a) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  
  (b) search for the device transmitter/receiver IR, right click on the device and turn off.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
   
  For more information about the game, I suggest you to contact game provider support site.
  http://fallout.bethsoft.com/eng/games/FNV-overview.html

• SDO_NN cannot be assessed without using the index when put inside subquery

  Hi all

  I met a problem when you use the function sdo_nn to find the nearest neighbor. Here is my scenario:

  _ I have 2 customer and store tables.

  Customer table _ a client_ID and a 2D sdo_geom point

  _ Store table has store_ID and a 2D polygon sdo_geom.

  In the beginning, I have this query to find the nearest store to each customer as below:

  Select s.STORE_ID, c.CLIENT_ID

  store customer, s c

  where sdo_nn (s.MYPOLYGON, c.MYPOINT, 'sdo_num_res = 1', 1) = "TRUE";

  _It works as expected when it returns a table showing the nearest store each customer.

  _Now I want to count the number of customers who have the same nearest store:

  Select / * + INDEX (store store_spatial_idx, client_spatial_idx client) * / count (nearest_store. CLIENT_ID)

  from (select s.STORE_ID, c.CLIENT_ID

  store customer, s c

  where sdo_nn (s.MYPOLYGON, c.MYPOINT, 'sdo_num_res = 1', 1) = "TRUE") nearest_store

  Group of nearest_store. STORE_ID;

  This query generates the following error:

  Error report-

  SQL error: ORA-13249: SDO_NN cannot be assessed without using the index

  ORA-06512: at the 'MDSYS. MD", line 1723

  ORA-06512: at the 'MDSYS. MDERR", line 17

  ORA-06512: at the 'MDSYS. PRVT_IDX', line 9

  13249 00000 - '%s '.

  I'm pretty new to spatial databases and hope get help to go further. Thank you in advance!

  Hello Pinball,

  Oracle space tends to be a quite complex with many variables and moving parts.  We chatted about the group to a sort of FAQ or guidelines to help people like you submit questions that actually answers.  First of all, you really have to tell us the version of Oracle you are using.  Particularly the problems involving the optimizer, version down to the exact defined patch number is a good idea.  Secondly, you took the time to submit the question so I guess you want a response.  If you really want to see the answer and then providing an example is one of the most important things that you can do.  I'm going to do here for you, but in general people on this forum come and go and are often pushed into lurkitude, so if you want the coax to provide you with an example of work is the key.

  DROP TABLE store1 PURGE;
  CREATE TABLE store1(
      store_id INTEGER NOT NULL
     ,shape    MDSYS.SDO_GEOMETRY
     ,PRIMARY KEY(store_id)
  );
  
  DROP TABLE client2 PURGE;
  CREATE TABLE client2(
      client_id INTEGER NOT NULL
     ,shape    MDSYS.SDO_GEOMETRY
     ,PRIMARY KEY(client_id)
  );
  
  CREATE OR REPLACE PROCEDURE seeder(
      p_client_count IN NUMBER
     ,p_store_count IN NUMBER
  )
  AS
    sdo_foo MDSYS.SDO_GEOMETRY;
    int_counter NUMBER;
    FUNCTION random_point
    RETURN MDSYS.SDO_GEOMETRY
    AS
        num_x1 NUMBER;
        num_y1 NUMBER;
  
    BEGIN
        num_x1 := dbms_random.value(-179,179);
        num_y1 := dbms_random.value(-89,89);
  
        RETURN MDSYS.SDO_GEOMETRY(
            2001
           ,8265
           ,MDSYS.SDO_POINT_TYPE(
                num_x1
               ,num_y1
               ,NULL
            )
           ,NULL
           ,NULL
        );
  
    END random_point;
  
  BEGIN
    int_counter := 1;
    FOR i IN 1 .. p_client_count
    LOOP
        -- Create a client point
        sdo_foo := random_point();
        INSERT INTO client2
        VALUES (
            int_counter
           ,sdo_foo
        );
        int_counter := int_counter + 1;
  
    END LOOP;
  
    int_counter := 1;
    FOR i IN 1 .. p_store_count
    LOOP
        -- Create a store polygon of some kind
        sdo_foo := MDSYS.SDO_GEOM.SDO_ARC_DENSIFY(
            MDSYS.SDO_GEOM.SDO_BUFFER(
                random_point()
               ,5000
               ,0.05
            )
           ,0.05
           ,'arc_tolerance=0.05'
        );
        INSERT INTO store1
        VALUES (
            int_counter
           ,sdo_foo
        );
        int_counter := int_counter + 1;
  
    END LOOP;
  
    COMMIT;
  
  END seeder;
  /
  
  BEGIN
    seeder(10000,200);
  END;
  /
  
  BEGIN
    INSERT INTO user_sdo_geom_metadata(
        table_name
       ,column_name
       ,diminfo
       ,srid
    ) VALUES (
        'STORE1'
       ,'SHAPE'
       ,MDSYS.SDO_DIM_ARRAY(MDSYS.SDO_DIM_ELEMENT('X',-180,180,.05),MDSYS.SDO_DIM_ELEMENT('Y',-90,90,.05))
       ,8265
    );
  
    COMMIT;
  
  EXCEPTION
    WHEN OTHERS
    THEN
        NULL;
  
  END;
  /
  
  BEGIN
    INSERT INTO user_sdo_geom_metadata(
        table_name
       ,column_name
       ,diminfo
       ,srid
    ) VALUES (
        'CLIENT2'
       ,'SHAPE'
       ,MDSYS.SDO_DIM_ARRAY(MDSYS.SDO_DIM_ELEMENT('X',-180,180,.05),MDSYS.SDO_DIM_ELEMENT('Y',-90,90,.05))
       ,8265
    );
  
    COMMIT;
  
  EXCEPTION
    WHEN OTHERS
    THEN
       NULL;
  
  END;
  /
  
  CREATE INDEX store1_spx ON store1
  (shape)
  INDEXTYPE IS MDSYS.SPATIAL_INDEX
  NOPARALLEL;
  
  CREATE INDEX client2_spx ON client2
  (shape)
  INDEXTYPE IS MDSYS.SPATIAL_INDEX
  NOPARALLEL;
  
  /* Works as expected */
  SELECT
  s.store_id
  ,c.client_id
  ,MDSYS.SDO_NN_DISTANCE(1)
  FROM
  store1 s
  ,client2 c
  WHERE
  MDSYS.SDO_NN(
      s.shape
     ,c.shape
     ,'sdo_num_res=1'
     ,1
  ) = 'TRUE';
  
  /* No worky? Works for me */
  SELECT
  ns.store_id
  ,COUNT(ns.client_id)
  FROM (
     SELECT
      s.store_id
     ,c.client_id
     FROM
      store1 s
     ,client2 c
     WHERE
     MDSYS.SDO_NN(
         s.shape
        ,c.shape
        ,'sdo_num_res=1'
        ,1
     ) = 'TRUE'
  ) ns
  GROUP BY
  ns.store_id
  ORDER BY
  ns.store_id;
  

  So I wrote this about 12 c (12.1.0.2.0) and everything works fine for me.  Then I moved back from 11 GR 2 (11.2.0.4.0) and of course, there are questions.  So I guess that you don't use flavor of 11g.  So at this point we can look at the docs and see for 11g, have you often need to specify which table is the head and that is the one that has the spatial index to use.
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e11830/sdo_operat.htm#SPATL1032

  Its rather interesting that the optimizer of 12 c knows what you want, when I had to squint myself at your request and to play a little with the refining.  Note that SDO_NN is sensitive, because the geometry of the main table should come second in the operator.  I did not know that on the top of my head.

  
  SELECT
  /*+ LEADING(c) INDEX(s store1_spx)  */
   s.store_id
  ,c.client_id
  ,MDSYS.SDO_NN_DISTANCE(1)
  FROM
   store1 s
  ,client2 c
  WHERE
  MDSYS.SDO_NN(
      s.shape
     ,c.shape
     ,'sdo_num_res=1'
     ,1
  ) = 'TRUE';
  
  SELECT
   ns.store_id
  ,COUNT(ns.client_id)
  FROM (
     SELECT
     /*+ LEADING(c) INDEX(s store1_spx)  */
      s.store_id
     ,c.client_id
     ,MDSYS.SDO_NN_DISTANCE(1)
     FROM
      store1 s
     ,client2 c
     WHERE
     MDSYS.SDO_NN(
         s.shape
        ,c.shape
        ,'sdo_num_res=1'
        ,1
     ) = 'TRUE'
  ) ns
  GROUP BY
  ns.store_id
  ORDER BY
  ns.store_id;
  

  So I think that is your answer.  Give it a shot and see if this fits the Bill.  Of course, moving to 12 c would be useful for such things.  It would be interesting to collect more examples of this kind of space thing where 12 c is the answer. Also, would be nice if we could mark somehow this discussion as applying only to 11g and earlier versions.

  See you soon,.

  Paul

• Any creative ways to prevent some users from always using the console?

  Our Organization strives to encourage people to use RDP to access servers, but also provides the use of the console as a backup.  We want users to use the console as sparingly as possible.  Any suggestions on ways that allow the use of the console but make sure users will choose RDP on the console?  Perhaps bringing to logout the user after a period of time?

  My first reaction is of course the sharks with laser beams on their heads but I don't understand how this can cause logistical and budgetary problems. My second idea would be to only allow access to the consoles of a jumpbox they also RDP. So I guess that users would acquiesce to all RDP'ing to the box, that they wanted to administer anyway rather than the double jump, but give them the Console in case there was a situation of emergency or clear need.

• SDO_NN giving ORA-13249: SDO_NN cannot be assessed without using the index

  Hi people,
  
  I do not understand why the SDO_NN gives ORA-13249 in circumstances.
  
  SQL > SELECT SlavaTest WHERE SDO_NN s s.title (s.geometry, SDO_GEOMETRY (2001, 4326, SDO_POINT (14.0, 49.0, NULL), null, null)) = 'TRUE' and title like '%' and rownum < 10;
  
  TITLE
  --------------------------------------------------------------------------------
  MultiPoint_305199
  LineString_691779
  MultiPolygon_180478
  MultiPolygon_358113
  MultiPolygon_53008
  MultiPolygon_249905
  MultiPolygon_204076
  MultiPolygon_636994
  MultiPoint_464514
  
  9 selected lines.
  
  SQL > SELECT SlavaTest WHERE SDO_NN s s.title (s.geometry, SDO_GEOMETRY (2001, 4326, SDO_POINT (14.0, 49.0, NULL), null, null)) = 'TRUE' and timestamp > = to_timestamp (January 6, 2011 ', ' dd/mm/yyyy') and rownum < 10;
  SELECT SlavaTest WHERE SDO_NN s s.title (s.geometry, SDO_GEOMETRY (2001, 4326, SDO_POINT (14.0, 49.0, NULL), null, null)) = 'TRUE' and timestamp > = to_timestamp (January 6, 2011 ', ' dd/mm/yyyy') and rownum < 10
  *
  ERROR on line 1:
  ORA-13249: SDO_NN cannot be assessed without using the index
  ORA-06512: at the 'MDSYS. MD", line 1723
  ORA-06512: at the 'MDSYS. MDERR", line 17
  ORA-06512: at the 'MDSYS. PRVT_IDX', line 49
  
  The spatial index is created with:
  CREATE the INDEX SlavaTest_geometry_idx_spatial ON SlavaTest (geometry) INDEXTYPE IS mdsys.spatial_index;
  
  'Title' and 'timestamp' columns have an index.
  
  Note the query comes from Hibernate and I can't change it's arbitrary.

  Slava2 wrote:
  What this means - there is a bug in Oracle?

  Well, it could probably be considered a, but [url http://docs.oracle.com/cd/E11882_01/appdev.112/e11830/sdo_operat.htm#i78067] documentation on SDO_NN warns you:

  Documentation says:
  However, if the column in the WHERE clause predicate specifies a non-space column in the table for geometry1 with an associated index, make sure that this index is not used by specifying the NO_INDEX indicator for this index.

  See you soon,.
  Stefan

• BEA-494002: the current role of the connection is not allowed to use the console

  Versions of the product:
  SOA Suite 11.1.1.4
  WebLogic Server 10.3.4
  
  I create a domain template using model of Fusion Middleware domain generator (< MIDDLEWARE_HOME > \wlserver_10.3\common\bin\config_builder.cmd) with release template.jar
  Characteristics of the source domain:
  -Domain OSB (Oracle Service Bus)
  -a managed server
  -mode of development
  -jrockit JVM
  
  
  When I create a new field using template.jar, start admin server and try to access sbconsole, the lancers of error to follow:
  < 7 July 2011 14:02:45 BRT > < error > < ALSB Console > < BEA-494002 > < internal error occurred in OSBConsole: the current role of the connection is not allowed to use the console action: ' / StatusMessages ' com.bea.alsb.console.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / StatusMessages.
  at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:88)
  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
  at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
  Truncated. check the log file full stacktrace
  >
  
  Any idea?

  It is an old bug. This bug would be fixed with ALSB 3.0 :)

  Problem: Model ALSB 2.6 Builder does not include certain security files

  Applies to:
  Oracle Service Bus - Version: 2.6 and later versions [Release: Aqualogic Service Bus and later]
  Information in this document applies to any platform.

  Symptoms
  When a model is built from an existing default values area, the JAR file is the following security files:

  DefaultAuthorizerInit.ldift
  XACMLAuthorizerInit.ldift

  So if a new domain is created with the model, sbconsole throws an access control security errors.
  A similar problem occurs when you are using WLST to clone an existing domain.
  When you access the service bus console, he doesn't know that the 'weblogic' default user has administrator permissions.

  You receive the following exception:
  Throwable: com.bea.wli.common.base.SBConsoleAccessException:
  The current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.

  Stack trace:
  com.bea.wli.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.
  at com.bea.wli.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:73)

  Cause
  Security policy files that exist in the area were not being grouped in the domain model when you use Model Designer.
  Therefore, the default server policy files were used which are not applicable for ALSB areas.

  Solution
  You can implement the following workaround solution:

  with model generator:
  Ensure that the authorized person of the domain policy files are grouped in the model. This will cause these files to be extracted in the areas newly created (using the template). All new domain ALSB will be ALSB security policy files.

  UN - jar, the template.jar file.
  Copy the two files .ldift of the domain that you used to create the template and paste them into the safety record of the contents of the jar file.
  Re - jar file template.jar and create a domain using the template.

  with WLST:
  While cloning a copy existing domain missing files from the domain you created in the directory of your new domain security.

  Products
  --------------------------------------------------------------------------------
  Middleware > SOA > Oracle Service Bus > Oracle Service Bus

• Type cast using the Console Design

  Hi all
  
  I am using the function java.util.Hastable.put (key, value) using the OIM design console. The function expects two objects as parameters to the card. I want to map a string to a string. While the string is a subclass of the object, IOM design concole does no direct mapping. Variables of type other object will simply not available in the menu dropdown.
  
  Q: How have the input parameters when the expected type is a superclass of the real parameters, using the console of design ?
  
  Kind regards
  
  Jan Willem

  There are com.thortech.xl.util.adapters.tcUtilHashTableOperations utilities that can help you to create and add values in a hash table. You can find the documentation in the java docs included in the location SDK\javadocs\util.

  -Kevin

• SDO_NN cannot be assessed without using the index

  Hello
  I'll try to find more close neighbours of a point using two tables (grafo_ped_links & haltestellen) and I fail miserably quiet.
  
  Select h.desc_i, grafo_ped_links h.numpal g, haltestellen h where (g.geometry, h.geometry) sdo_nn = 'true' and g.start_node_id = 355 and rownum < = 5
  *
  ERROR on line 1:
  ORA-13249: SDO_NN cannot be assessed without using the index
  ORA-06512: at the 'MDSYS. MD", line 1723
  ORA-06512: at the 'MDSYS. MDERR", line 17
  ORA-06512: at the 'MDSYS. PRVT_IDX', line 49
  
  But I am able to find the nearest neighbor on individual tables (singularly) without any problem. I'm even able to find a WITHIN_DISTANCE using two tables (below the sql statement).
  
  Select h.numpal from grafo_ped_links g, haltestellen h where SDO_WITHIN_DISTANCE (h.geometry, g.geometry, 'DISTANCE = 0.5 UNIT = KM') = 'TRUE' and g.start_node_id = 355;
  
  NUMPAL
  ----------
  5122
  5103
  5102
  5120
  5100
  5301
  5302
  5303
  
  I even dropped the indexes of the two tables and recreated them again. I read somewhere that the problem could be due to a lack of advice, so I tried the following and I still get the same error.
  
  
  Select / * + LEADING (g) INDEX (h haltestellen_ridx) * / h.desc_i, h.numpal
  of grafo_ped_links g, h haltestellen
  where (g.geometry, h.geometry) sdo_nn = 'true' and g.start_node_id = 355 and rownum < = 5
  
  Select / * + INDEX (h haltestellen_ridx) NO_INDEX (g grafo_ped_links_ridx) * / h.desc_i, h.numpal
  of grafo_ped_links g, h haltestellen
  where (g.geometry, h.geometry) sdo_nn = 'true' and g.start_node_id = 355 and rownum < = 5
  
  Select / * + USE_NL (h, g) VALUE * / h.desc_i, h.numpal
  of grafo_ped_links g, h haltestellen
  where sdo_nn (g.geometry, h.geometry, 'sdo_num_res = 5', 1) = 'true' and g.start_node_id = 355 and rownum < = 5
  
  
  Anyone can please, show me the way, or give a hint. I use oracle spatial 11g.
  
  Thank you!
  Cook
  
  Published by: user611283 on December 30, 2009 06:11

  It should be 'TRUE '.

  Select h.desc_i, grafo_ped_links h.numpal g, haltestellen h where (h.geometry, g.geometry) sdo_nn = 'TRUE' and g.start_node_id = 355 and rownum<=>

• Cannot run business ruleset using the Launcher command line for the calculation Manager

  Hello

  I use the Hyperion 11.1.2.2 planning version. I am trying to execute a business rule defined via the calc Manager command line utility. Please see the order form below,

  D:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1 > CalcMgrCmdLineLauncher.cmd /U:HBRadmin D:Capex /A:CORP S:Capex_Nightly

  At the launch of the above command, the utility starts and ends without triggering the rule in the database. See log info below,

  Local planning: en_US

  using java.library.path: D:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64

  EPM_ORACLE_HOME (D:\Oracle\Middleware\EPMSystem11R1) has the value of the property 'EPM_ORACLE_HOME' of the JVM.

  using the property of Java for Hyperion home D:\Oracle\Middleware\EPMSystem11R1

  For the non - RFP app, ask size is not necessary

  EPM_ORACLE_INSTANCE (D:\oracle\Middleware\user_projects\epmsystem1) has the value of the [EPM_ORACLE_INSTANCE] property of the JVM.

  Support RTC Essbase Version: 0xb1221

  null

  But if I try to execute a business rule with the calc Manager command-line utility, it works well. It is only rules base which poses problem. Please note that this set of rules is to have business rules that belong to a database that is Capex.

  Any help on this request would be much appreciated. Please notify.

  Thank you

  AP

  Please ignore this request,

  I found the KB article below

  Hyperion Planning Rulesets cannot be launched using the CalcMgrCmdLineLauncher planning (Doc ID 1453630.1)

  Thank you

  Arun

• How to set up the SRI 4000-4331 to enable logging of rsyslog facilitated by using the console admin GigabitEthernet0 port

  Does not work?  Pleas advise

  Run the following on the SRI 4331.

  ntmhomes #configurer t
  Enter configuration commands, one per line. End with CNTL/Z.
  ntmhomes (config) #service timestamps log datetime localtime
  ntmhomes (config) #.
  ntmhomes (config) #.
  ntmhomes (config) #logging host 192.168.20.5
  #logging ntmhomes (config) trap inform
  ntmhomes (config) #logging trap information
  FAC #logging ntmhomes (config)
  ntmhomes (config) #logging facility local7
  ntmhomes (config) #end
  ntmhomes #.

  ntmhomes (config) #logging facility local7
  ntmhomes (config) #end

  ntmhomes #show logging
  Syslog logging: activated (0 messages fell, 11 messages limited rate, 0 flashes of heat, 0 overruns, xml disabled, filtering of persons with reduced mobility)

  No discriminator Message Active.

  No discriminator inactive Message.

  Recording console: level of debugging, 50 messages, xml, disabled,.
  filtering of persons with reduced mobility
  Monitor logging: debug, 0 messages level, xml, disabled,.
  filtering of persons with reduced mobility
  Logging buffer: level of debugging, 64 recorded messages, xml, disabled,
  filtering of persons with reduced mobility
  Exception logging: size (4096 bytes)
  County and logging messages timestamp: disabled
  Persistent logging: disabled

  No active filter module.

  Logging trap: information level, 66 lines of journaled message
  Connection to 192.168.20.5 (514, auditing disabled, udp port
  (link to top),
  5 lines of message logged,
  0 message rate lines limited.
  0 message lines a dropped-by-MD,.
  Sequence number of XML disabled, disabled
  filtering of persons with reduced mobility
  Interface-logging Source: VRF name:

  Log buffer (4096 bytes):
  g to host 192.168.20.5 port 0 CLI request Triggered
  * 9 January 17:45:27: % SYS-5-CONFIG_I: configured from the system memory
  * 9 January 17:45:27: % IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, disabled interfaces
  * 9 January 17:45:27: % IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/1, interfaces disabled
  * 9 January 17:45:27: % SPA_OIR-6-OFFLINECARD: SPA (ISR4331-3x1GE) offline in subslot 0/0
  -More-

  I think you need to tell the system that you are using the management interface

  Try

  host 192.168.20.5 record vrf Mgmt-intf

  See the link below the section on management tasks common gigabit ethernet

  http://www.Cisco.com/c/en/us/TD/docs/routers/access/4400/software/config...

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• Internet Explorer cannot be opened by using the built-in Administrator account. Sign in with a different account

  Fixed HP laptop bios update has disabled the option to open all the apps. Simple BUT frustrating built-in Administrator fascist authoritarian East

  Hi Dean,

  Built-in Administrator account does not have a split token and metro apps may not work under full administrator token. So metro apps cannot be turned on with the built-in Administrator account.

  I recommend you create a new user account to access the User Interface modern apps.

  Check out the following link to create a normal administrator user account.
  Which user account is right for me?
  http://Windows.Microsoft.com/en-us/Windows-8/which-user-account-for-me

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Hope the information is useful. If you have any other questions, answer here and we will be happy to help you.

• Cannot run CS6 after using the CC (CC subscription has expired)

  I let my subscription CC expire (while my company treats a new license) and to do in the meantime to CS6. However, I cannot go beyond the message 'Renew your membership' and can't seem to save my copy of CS6 (it will not be displayed as a registered product and I can not add). I tried to use the CleanerTool Adobe CC (as recommended here), removed all Adobe products and reinstalled CS6 (and rebooted), but still can't make it work. Any help would be greatly appreciated!

  Hi Andre, try the steps mentioned in the link below.

  • License considerations mixed - if you have an active member of the creative cloud and a serial number for Lightroom 6

  Waiting for your response.

  Atul_Saini