Any creative ways to prevent some users from always using the console?

Similar Questions

• Prevent some users from connecting

  Is there an easy way to prevent users from my LDAP directory with a special connection to the CMC role? Or would need a custom for this component?

  If this is not the case, is it possible that I can remove the role 'authenticated' of these users? I looked at maps of credentials, but does not know how to remove a role with a card.

  "authenticated" by itself really means little, this role does not have the permissions set in COE out of the box.  By default, users are granted the role of "guest", who has read access to the security group 'Public '.  Remove this 'guest' read permission would allow a connection, but no access to anything other than an error page.  Simply connected usually isn't a problem, it is usually more what a user can access once logged.  This is where a user roles has become important.

  In my opinion, the simplest method is to set the provider LDAP to examine a certain OU to its users and include only users in this ORGANIZATIONAL unit that will use COE.  This suggestion is based on the information at hand.  If you use the portal, SOA, etc. in the same domain, this approach is perhaps not possible

• Is there a way to recover deleted history sites? Also, a way to prevent unauthorized users to erase history?

  Is there a way to recover deleted history sites? Also, a way to prevent unauthorized users to erase history?

  You need administrative rights to do this. Be careful as it is possible to easily create a very difficult to solve waste.

  Run gpedit.msc

  Reach

  -User configuration

  -Administrative templates

  -Windows components

  -Internet Explorer

  -Delete browsing history

  Disable the feature turned on 'delete browsing history '.

  You also probably want to configure

  -InPrivate

  Disable the active InPrivate browsing

  If you use IE8; Otherwise, the user can simply avoid registering in the first place.

  Also - the browser menus

  Tools menu: Disable Internet Options... menu active

  would be a good thing; Anyone who shouldn't be allowed to delete the history of should not be also change too much in the Internet Options.

  For some reason, changes to this setting of group policy have no effect in IE6 and IE8 on a workgroup computer XP Pro.

  In fact, I would like to disable the entire Tools menu item; However, there don't seem to be any means to do.

  Run gpupdate /Wait:0

  Any user who cannot access gpedit.msc, editing the registry (regedit.exe, regedt32.exe) or mmc.exe may re-activate it now grayed out in the menu items.

  Note: mmc.exe can be activated by right clicking my computer even as a limited user. Remove or deny permissions to these files for administrator users.

  I would like to configure them on a per user or user group basis. Does anyone know of a way to do by not part of a domain?

  I know no direct way to recover deleted history sites. Perhaps, they enter the trash somewhere. They may be captured by the network of monitoring programs, even if they have been deleted from the personal computer.

• Prevent a user from changing

  Hello
  
  : Is thr possible to prevent a user to perform the DML operation

  Hello

  LOCK TABLE tablename in EXCLUSIVE MODE;

  We can use this to prevent a user from some time handling

  If you want that the user don't not to access permanently to revoke the privileges of this user.

• Prevent a user from changing the ID of project in P6 EPPM 8.3.7

  Anyone know if there is a Global privilege or project security profile that prevents a user from changing the project on an existing project ID?  We use Primavera P6 EPPM 8.3.7

  Thank you

  Eric

  Hello

  Security of the project profile below can help you

  Change the details of the project with the exception of costs / Financials

  Determines if the profile will allow users to modify fields in general tabs, Dates, default values, resources, and settings of the project details. To assign a project of baselines, users must also have the privilege of project 'assign the planning of project"assigned to their profile.

  Kind regards

  Marcos

• 5.7 LR is no longer exporting files jpg (from RAW). No error message, just "finished work". No way around changing some options for export as the name of file, image size...

  Why is 5, 7 LR is no longer exporting ALL files jpg (from RAW)?

  No error message, just the usual "finished work" - but without actually writing a jpg file.  No way around changing some options for export as the name of file, image size...

  Hi antjeh37833361,

  Could you please export a Jpeg image and see if it exports.

  Also try to export the RAW image in Jpeg format on the desktop and then see if it exports.

  Please upgrade to the latest version 5.7.1 if Lightroom you are currently on 5.7

  Kind regards

  Tanuj

• Is there a way to prevent which an application ID in the URL

  Environment
  
  APEX 3.1.00.09 on AIX 5.3
  
  I got a question to me of our person of middleware for the modification of the URL by a user.
  
  We have an application of APEX facing outwards, say 100 ID, which uses a reverse proxy inside the firewall to point to the real of the server hosting the application APEX. When a user enters the URL given to them for this application the login screen appears just as expected. When the user types now on the number of the application in the URL, he is taken to the login screen of another application hosted on that same server.
  
  The question is: How can I do one or both of the following:
  
  1 - prevent the user from typing too the ID in the URL or
  2. when the user typing on the application ID it is redirected to the desired application, in this case ID 100
  
  It is the only outside demand, that we have at the moment, but I expect more to come.
  
  Thank you very much in advance for your help.
  
  -gary

  Gary,

  Issue an HTTP request from a browser to a site of apex requires the application ID (or alias) as a way of saying Application Express application must be invoked. Thus,.

  1 - prevent the user from typing too the ID in the URL or

  Not that I know of. Standard functional capabilities of a mouse and a keyboard with the controls presented by standard browsers will still allow this action to execute. The user simply focuses on the characters of window and the location browser types, insert or replace text. Then another keystroke or mouse click sends the request.

  2. when the user typing on the application ID it is redirected to the desired application, in this case ID 100

  If the user begins to communicate with the application 999, how 999 request would know that he should not have been called, but she should have asked 100?

  Maybe you ask if there is a way to prevent access to some applications based on the place where in the network of the application from. If so, each application can contain code to check IP address of origin and allow/reject the application on this basis. Or the internet facing web server might have a few rewrite rules to allow only f? p the URLS that contain some of the application ID.

  Scott

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.

• I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list.

  I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list. MBP OS 10.11.4

  Open the "sent" folder on the account that you mailed to and look at the message that you sent it to see.

  You have email of the accident to a group? You have a group created in the application of Contact with these names? Or maybe that you click on reply to all to create the message?

• where should I go to prevent other users to download * on the net?

  where should I go to prevent other users to download * on the net?

  Hello

  What browser do you use?

  If you use Internet Explorer, you can enable the Access Manager. An Access Manager allows you to control Internet content types that can be played on your computer.

  a. click the 'Tools' menu and select 'Internet Options'
  b. in the Internet Options dialog box, click the "Content" tab and then click on the button "activate".
  (c) in this window, click each category and use the slider to set the desired level.

  Hope the helps of information.

  Please post back and we do know.

• use restart from scratch using the option "ALT F10" and lose everything. Help, please!

  Whenever I try to connect my laptop, a screen invites me to do a repair of launch set-up. It goes through the motions for ten minutes and the screen turns white. The only way I can get at all is to restart all from scratch using the option "ALT F10" and lose everything. Any advice I would really appreciate.

  Hello

  1. Since when are you facing this problem?
  2. You did any recent changes?
  3. What version of Windows is installed on the computer?

  I suggest that you go into recovery options and try to perform system restore and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Otherwise, I suggest you to give us more information, so that we can better help you.

  It will be useful.

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Box "Always use the selected program to open this kind of file" is grayed out out__cant change file association for any type of file

  I'm not allowed to change any combination of files for any type of file... If I try to associate a file type with a program that I can't the box is grayed out to always open the file with this program, for example, if I try to open .py (programming in python language file) with python from another program whenever I have to right click and open with python, but if I want to choose the "always use". the selected program to open this type of file"is grayed on I can not change it... pls help

  Hi VikkHckrz,

  1. you remember to make changes to the computer recently?

  Method 1:

  You can consult the following KB article and run the fix it tool available and check if you can assign file association.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Also check out the link:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  After running the fixit so check the option is grayed out or not.

  Method 2:

  If you're still having problems, then you can try to change the settings in the registry only if it is present on your computer and check if it helps.

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer

  (c) in the right side of the screen, double click on "NoFileAssociate".

  d. change the value of "NoFileAssociate" from 1 to 0.

  e. exit the registry editor and restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I bought lightroom 6 for my mcbook pro in June, installed and used one or two times very well.  (I also had a version of lightroom track 5 and separately installed creative cloud before buying 6)  I haven't used the application a few months

  I bought lightroom 6 for my mcbook pro in June, installed and used one or two times very well.  (I also had a version of lightroom track 5 and separately installed creative cloud before buying 6)  I haven't used the application a few months and tried to open it this week without success, it launches the image of the foliage of the forest and freezes.  I uninstalled the version of lightroom 5, nothing helps.

  Hi Cyril,.

  If you are using the trial of both creative cloud, please uninstall it from the computer and try to revive the Lightroom.

  Thank you

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra