Similar Questions

• Cannot match Smartphone with Satellite A100 for ActiveSync

  Hi, on board.

  I can't use ActiveSync to sync my phone with the laptop; It seems that the twinning of 2 devices fails.
  With USB connection I can ActiveSync successfully.

  My devices are:
  * Toshiba Satellite A100 (PSAA9) with ActiveSync 4.2 and Toshiba Bluetooth Stack 4.20.01
  * HTC MTeor with Windows Mobile 5.0 SmartPhone

  I tried to follow the HowTo in:
  http://APS.toshiba-tro.de/Bluetooth/

  How-> ActiveSync via Bluetooth (TOSHIBA PC - smartphone with Windows Mobile 5)

  I find cela the opportunity to say that it is wrong that the HowTo is not in the English language.

  In any case, I followed him through until page 8, 18 statement, where the third picture shows the box in ActiveSync checked; my phone doesn't have this box: it has "Serial Port".
  I check "Serial Port" (also tried not to check...) and continue until the 21 statement. Well, it stops there; I don't understand that messagebox; in fact nothing happens, not in the laptop or the phone and they don't get matched.

  Found here a recent thread, asserting the need to define COM7 in the registry. I did it. Oddly enough, COM7 is not my LoalCOM server, but a customer LocalCOM; COM8 is the LocalCOM server.
  I tried also with COM8.

  I tried to remove Bluetooth Stack completely and reinstall (embedded version and latest version).
  I reinstall ActiveSync 4.2.
  I also tried with ActiveSync 4.5 BETA.

  Nothing worked for me.
  Help, please.

  Note: I have activesynced the same phone via bluetooth successfully with a HP laptop which has its own bluetooth software with, I think, virtual serial port driver of widdcomm.

  Thank you.

  Hello

  This Smartphone is not known to me, but I really put t know why you try to use BT between MTeor and laptop when connecting USB works. Using this connection, you can do whatever you want.

  BT on Smartphone is useful if you want to connect the small BT headset, but I don't see the reason to try this when the USB connection is working successfully.

  If there is no success I put t think it is Toshiba related question and also try to contact HTC support. They know more about the own products.

  http://www.Europe.HTC.com/support/support.HTML?device=htcmteor

  Good luck!

• Documents to Smartphones blackBerry to go Torch 9810 7 OS and office to go Premium 2.0 - Docs cannot match

  New Torch 9810 OS7 with Docs to 3.0 GB replacing Torch 9800 (now deceased; bouncing on a concrete floor of ~ 8' is not good, LOL).

  I have Docs to go Premium 2.0 on my laptop. I can't add a device and pair the 9810 little matter what I do. Therefore, I am not able to synchronize files on my laptop with the Torch 9810. I initially bought Docs to Go from DataViz in 2008, including the updates over the years.

  It seems that Premium 2.0 cannot work with OS 5/6, 7 operating system. Can't seem to find a definitive answer on the RIM or DataViz sites. In fact, DataViz apparently can't stand the Docs to Go for the 9810 Torch.

  I know 7 OS is very new, but can anyone provide any assistance or guide me to the right place to ask questions?

  Thank you.

  K. Glenn Cole

  [P.S. I'm fairly certain that I can update my Torch 9810 manually for now. It's just that I'd rather be able to synchronize seamlessly I did when the Torch 9800 was still alive].

  Yes!  Finally found after a call * of * upper RIM support. It was a * after * a few phone calls, a terse letter to RIM Corporate HQ and really bad technical advice to support RIM who said, essentially, "can't do... You must manually synchronize. »

  The senior support specialist said that the instructions are not clear. This is what happens when the RIM has the part BB of Docs to Go and DataViz has the desktop application. DataViz is not without some guilt here. They have just "wash their hands" to * any * question involving RIM and Docs to Go, and they have the desktop version used for synchronization with the BB.

  I'll have to see how it works over time, but let's say I'm cautiously optimistic. (That means I'll be surprised if it works 100% of the time!)

• combined keyboard and mouse, but cannot match, iPad, iPod or phone

  They are trying to pair with the iMac, I get a confirmation number to compare more features, sometimes briefly connect then drop out. iPad and Ipod connected to WiFi, mini smartphone Vodafone 7 not connected to the internet.

  iPads, iPods, iPhones not are supposed to be coupled with a Mac.

• Satellite L550D - cannot match the the part number on the upgrade DVD Toshiba

  When I try to run the Upgade Toshiba DVD he choose manually the model of my laptop and gives me two choises: L550D PSLNJE and L550D PSLNSE.
  My room number, however, starts PSLP8E, which does not quite another.

  Should I just choose one of the two options at random, or do I have to do something that the guide upgrade does not tell me?

  Where you bought your model of laptop (countries) and where you stopped this upgrade of the disks?
  As I can see that your model is European model but two others (you see in the upgrade) is not European models.

• Cannot match the Z10 to a Linux machine via USB (OS 10.3.1) - ok pairing with wifi

  Hello

  Whenever I run the Device Manager and try to pair with usb I get a "could not connect! Unplugged device or can not be detected. When I connect the usb cable, a new network connection is created in the 169.254.0.X subnet.

  I can pair it correctly using wifi.

  I remember during the pre 10.3 era, there was a 'mac' option that did the trick. I missed something?

  Thank you

  Problem solved.

  For others using NetworkManager, that's what I did:

  1. Open the connection editor and change the connection that corresponds to your BB device.
  2. Go to the IPv4 tab
  3. Method of manual adjustment.
  4. Click Add and the value 169.254.0.2, 255.255.255.0, 169.254.0.1, address, netmask, gateway, respectively.
  5. Click on the routes > Add, and then set it to 169.254.0.1, 255.255.255.0, 169.254.0.1 1 address, netmask, gateway, and metric respectively
  6. Click Ok two times.

• Bluetooth mobile keyboard 6000 cannot match in windows 7 - I get a pairing code, but the keyboard does not meet the entry

  the keyboard connect Windows XP very well, but after the upgrade to Windows 7, I am unable to pair. I can generate a pairing code, but the keyboard does not respond. Suggestions?

  Hi Amberlina,

  This problem may be caused by damaged or incompatible drivers. I suggest you to consult the help articles and check if it helps.

  Troubleshooting: keyboards

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/keyboard/wireless-Bluetooth

  I can't get my device to pair with my computer.

  http://www.Microsoft.com/hardware/Bluetooth/en-us/default.mspx

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Helmet Jaybird not matching not...

  Helmet Jaybird not matching not...

  iPhone 7 more bluetooth keeps spinning, no device detected

  Hello qwer134,

  Thank you for using communities of Apple Support. And I see that you just got a new iPhone 7 more, congratulations! Always exciting when you get a new iPhone.

  I see that your Jaybird bluetooth headphones are having difficulties if the pairing on your iPhone. I definitely want to make sure that I can pair my headset to my iPhone, I use mine a lot. Let's see how I can help.

  Please see the article get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, specifically these sections:
  
  

  First try these steps

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connect again.

  If you still cannot match or connect your Bluetooth accessory

  Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device.

  Contact the Apple Support if you have any of these problems:

  • You can't turn on Bluetooth or the setting is gray.
  • You cannot connect any Bluetooth accessories with your device.
  • The accessory manufacturer has confirmed that your accessory works properly.

  To learn more

  Find out what Bluetooth, profiles you can use with your device.

  Once you have gone through these steps, see if you get the same result when connecting.

  Have a great day!

• Cannot send photos as attachments. How to install MAPI in windows mail?

  Attempts to send photos as attachments in the emails.  Set up pictures for mail in PMB launcher then click ok.  Can't get no e-mail form.  The photos go to "never never land".  I talked to support PMB launcher.  They said activate/install MAPI (messaging API) in windows mail.  Is it?  Where can I find the MAPI, how can I install it, etc.  I looked everywhere in windows mail, and can't find any hint of MAPI. Any help would be appreciated.

  Attempts to send photos as attachments in the emails.  Set up pictures for mail in PMB launcher then click ok.  Can't get no e-mail form.  The photos go to "never never land".  I talked to support PMB launcher.  They said activate/install MAPI (messaging API) in windows mail.  Is it?  Where can I find the MAPI, how can I install it, etc.  I looked everywhere in windows mail, and can't find any hint of MAPI. Any help would be appreciated.

  To my limited knowledge...
  Windows Mail is a Mapi Simple client.
  MS Outlook is a full Mapi client.
  In short, WM cannot do the job. You need Outlook. That's the extent of my 'know-how '.
  Talk to your "so-called" PMB support people. Ask a higher level tech to talk to you.

  PS just a question: I don't know anything about PMB. What is in PMB Launcher that Vista cannot match?

  t-4-2

• Pairing Bluetooth

  cannot match iPad Pro with Bose speakers. iPad 4 pairs without problem. Tried power down, then cold start... nada. Latest version of iOS just loaded (not impressed so far). All of the suggestions. ?

  Hello, Susanlaurence!

  Thanks a lot for the use of Community Support from Apple. After reading your post, I see that you cannot associate a set of Bluetooth speakers with your iPad Pro – even if the pair speakers with your iPad 4 without problem. I use a few Bluetooth devices myself, so I know how much they can be; I'd be happy to help you!

  First of all, since you are able to match the speakers with your iPad 4, I wish to begin by ensuring that Bluetooth is disabled on this iPad under settings > Bluetooth before you try to pair with the iPad Pro. You can pair your speaker with multiple iOS devices, but they can only actively be connected to one at a time.

  Once the Bluetooth feature is turned off on the iPad 4, use the following article to try to match your Bose speakers:

  Configure and use third-party Bluetooth accessories

  If you're still having problems matching the speakers after that, you can use the additional steps and information in the article below.

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  Good listening!

• How you turn off pairing a show from a cleaned iphone?

  I iPhone I had to clean it thoroughly because of software problems, yesterday... The watch I have is always locked the old device and now my new watch application cannot match as the watch display locked my out (I thought that my entering the wrong code 10 times he wouldn't set, but alas) what can I do to get these 2 again paired devices? The comments are well appreciated

  Hello

  Follow these steps to clear your locked watch and pair it with your iPhone:

  • Connect your watch to its charging cable with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press Power Off (don't try to drag - just press more firmly than a normal tap), then press erase content and settings.
  • Associate your watch by using the app on your iPhone, choosing backup restore if offered the choice.

  More information:

  If you have forgotten the password for your Apple Watch - Apple Support

• Air iPad with 9.3.2 Bluetooth issues

  I upgraded my iPad Air to 9.3.2 and now it does not connect with all Bluetooth devices. It will not find most of them, but even if there is a discovery, it will not pair with anything.

  Just before that, I reset my iPad completely and refreshed with the new iOS.  My iPad showed 700 MB of memory left in the memory usage, but when I connected to iTunes on my laptop it showed nearly 13 GB of available. I tried to remove several things, deleting and reinstalling apps, but nothing seemed to free up memory, and most of the memory is being taken over by one big yellow 'other '.  So I reset the iPad and started from scratch. When it resets itself, it is automatically downloaded 9.3.2. I didn't restore from backup, but I rebooted all the apps that I've had, and the memory issue has been resolved (I now have a little more 13 GB of available), but now I can't connect to my Bluetooth keyboard, car or speaker.

  I went through the process of resetting the network settings and reset all settings. I have turned on and off Bluetooth several times. I have turned on and off other devices several times. I turned them all on and off in a different sequence. My iPad that air will not connect to any Bluetooth device.

  I read that there is a significant problem for many users. Please let me know when a fix will be made available, or to explain how I can downgrade to 9.3.1.

  Hey there Bmwilking,

  I understand that you are having problems with your iPad Air and you cannot connect to any Bluetooth device currently. I have an article for you with a suggestion to deal with this situation directly:

  If you still cannot match or connect your Bluetooth accessory

  Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device.

  Contact the Apple Support if you have any of these problems:

  • You can't turn on Bluetooth or the setting is gray.
  • You cannot connect any Bluetooth accessories with your device.
  • The accessory manufacturer has confirmed that your accessory works properly.

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch - Apple Support

  https://support.Apple.com/en-us/HT201205

  Be vigilant and thank you for visiting the communities of Apple Support.

• FAQ (26): I installed a different version/version of Windows and now SDM will not show me updates.

  I installed a different version/version of Windows and now the SDM does not work in "Update" mode

  This can occur when some system that HP did not specifically tests with the model is installed and often happens with models and Windows Ultimate edition (or even 64-bit editions on some older models) before Windows 8 Ultimate.
  
  Because SDM detects the new operating system, but it cannot match in the SDM catalog, he (SDM) will disable mode "Update."  However, please note that you can still use SDM mode 'All products' to download your SoftPaqs by doing as follows (the Probook 4730 s is used as an example):

  1. Press the "view all products" in the SDM toolbar
  2. If a dialog box warning that "no operating system have been selected, then skip to step.
  3. Press OK to close the dialog box.
  4. Check the «Microsoft Windows 7 Professional 64 Edition»
  5. Click on the tab "language filter".
  6. 'English - International' is checked.
  7. Press the OK button.
  8. Now, expand the tree on the left side of the SDM application by selecting the following:
  9. HP Probook Notebook PC Series 4700
  10. HP Probook 4730 s Notebook PC
  11. Microsoft Windows 7 Professional Edition 64
  12. Check the box 'international - English.
  13. Press the button "find available SoftPaqs.
  14. After "things calm down", click on the button "See the last SoftPaqs" at the top right of the application of SDM.

  The latest list of the Softpaqs for your model should now be displayed. We recommend that you download all listed SoftPaqs. This whole new way SoftPaqs are released for this model will appear on the top list titled "Available SoftPaqs" display.

  To install a SoftPaq after downloading, do the SoftPaq to the ListView "Downloaded SoftPaqs" right click and select "install SoftPaq.

  Important note: most SoftPaqs listed using the method above should apply to your model, but a small number of SoftPaqs might not be applicable to your model due to the offers of different material for your model. This means that not all listed SoftPaqs will install on your model and that is normal.

• Leapmotion Envy 17: my bluetooth driver does not work

  bluetooth cannot match, send or receive files

  Hello @MohamedKhairy,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your notebook is not able to pair with Bluetooth devices, and I'd be happy to help you in this case!

  To make sure that the Bluetooth radio on your computer is set up correctly, please follow the steps below:

  Step 1. Go to Device Manager

  Step 2. Right click on "Bluetooth device" you want

  Step 3. Select "update driver software... »

  Step 4. Choose "Browse my computer for driver software".

  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.

  Step 6. Select "Ports (COM and LPT).

  Step 7. Select "Microsoft" to the list of "manufacturers".

  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.

  Step 2. Click on where it says change device installation settings.

  Step 3. Select No, let me choose what to do option.

  Step 4. Check the automatically get the device app option

  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter

  Step 2: Now find 'Bluetooth Support Service' and double click it

  Step 3: Now click on the Log on tab and type "Local Service" without the quotes

  Step 4. Click on "account".

  Step 5: Now remove any authorization of passwords the password field blank

  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also check:

  If you're still having problems, you can also see this thread about how @IstvanKovacs resolved his problem with the Compatibility Bluetooth 4.0 with Windows 8.1.

  I also encourage you to display the number of your product to your computer. Below is one is a HP Support document that will show you how to find the product number of your computer. In addition, it will also help if you specify which operating system you are using; and if your operating system is 32 or 64 bit. You can provide more information, the better!

  How can I find my model number or product number?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!
  
  Concerning

• Tecra 9100 find address mobile phone but don't then pair with it

  I had problems with my laptop built in bluetooth. All I want to do is simply send files from my laptop to my phone via bluetooth. However, this has become a very frustrating task. Battery bluetooth (V1.2) software that originally came with my Tecra 9100 laptop was completely useless - there not even "light" even know I clearly choose the Activate button.

  I messed around with the options and nothing worked so never wholesale, so I downloaded 5.4 or anything on the Toshiba site and uninstalled v1.2 (should I have?). Finally, when I searched for devices, an address has shown (address of my mobile I think) so I chose
  address and push next. 'Connection... '. ""Unable to connect to service"(or something like that). Why can it not pair with my phone? That is the question.

  PS when I search my phone devices, my computer name appears but when I select it it says that it cannot match. Help! Oh and I just uninstalled Bluetooth Stack everything it is called because it's useless! :(

  If you want to send files to your mobile phone. Some phones don't support FTP. This means that you cannot send multiple files at the same time. You must use the Object Push function in this case, because this function (profile) is supported by most of BT Mobile phones.

  You can try the following. --> Mouse-right click on the Bluetooth icon in systray-> Bluetooth information interchange-> Bluetooth-> Device Discovery-> Object Push drag and drop a file that will be sent to your listed phone icon. Check your mobile phone which will ask you a dispatch confirmation.