Service Windows wireless suddenly stopped working because of problem with the KeyIso service

Similar Questions

• Updates Windows 7 suddenly stopped working, stuck at updates

  Original title: Windows 7 updates

  MS has stopped supporting Windows 7? Like many others, my updates of Windows 7 suddenly stopped working last month. I do not install a new or fresh, version but simply by doing what I did every month for a long time and trying to install the latest updates. Windows Update is just to 'check updates'. I left on for more than an hour several times. I tried each 'fix' that has been suggested. Nothing has worked. So, I resorted to the Windows Update Catalog check manually and I noticed that there were no new updates of Windows 7 security for may 2016. Why?

  If all updates appeared and installed then reset the update system is a good idea.

  I prefer this small utility

  Use Option 2 on the list after right click and select run as administrator

  https://Gallery.technet.Microsoft.com/scriptcenter/reset-Windows-Update-Agent-d824badc

  Download in your downloads folder

  Right-click and select extract all in the downloads folder.

  Then right-click on ResetWUEng and select run as administrator

  Follow the rest of the guides messages

  Press any key to continue

  Type 2 for this Option in the list and the Enter key

  Press on y for Yes I think twice

  After that that he completed

  Type 15 for this option and the Enter key to restart the machine.

  Must they will restart in 60 seconds will save your work... Press a key to continue.

  After reboot, go to windows updates and manually check the updates shouldn't take a few minutes.

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not open windows live Director files/projects error: Windows Live Movie Maker has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program...

  Original title: Windows Live Movie Maker

  Hello! I have a problem with windows live movie maker. I had been using windows live movie maker before and was able to make several projects already.  But recently I could no longer open my files and the following messages keep appearing on: "Windows Live Movie Maker has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.  I downloaded the Windows Live Movie Maker program several times, but it does not work.  Does this mean I can have deleted a file/program to do work and recover all the projects I've done?  I remembered that once, I was removing a "Windows Live" in the program folder files because I wasn't happy with the Windows Live Messenger, kept popping up, which was not able to use, so I removed it from the list. Help, please!

  Hello

  The question you have posted is related to windows live movie maker and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.

  http://windowslivehelp.com/product.aspx?ProductID=5

• Math (s) program has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available,

  Mathematica, matlab and Powersim all receive the error at startup «empty program stopped working. » A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. " The programs worked in May when I left for vacation and now they do not work. I tried to uninstall/re-installing all programs - it did not work. Programs opened by operating in safe mode with network. I can't find out whether the problem is caused by a windows update. I can't do a restore of the system to an earlier period of time because the only active restorations are after programs stopped working. Any advice is greatly appreciated!

  Hello

  It seems that the module defective sdb4mdu.dll is the cause of the crash. According to my research, sdb4mdu.dll is a driver printer interface module - which means that it is related to your printer drivers. Assuming that this module belongs to your default printer (which it might not, it is hard to say), disable it would risk instability. I recommend you to run the System File Checker. See this article: http://support.microsoft.com/kb/929833/en-us

  Don't forget to restart your computer after you run it.

  If this does not work, try to uninstall and reinstall the drivers for your printer.

  If it does not either, we can try to turn off the TPM. (first of all, creating a restore point in case something goes wrong)

  I hope this helps!

  Mithrandir

• SilkRoad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  After I installed and opened a Silkroad Online on my Windows 7 64 bit, an error pops up: Silkroad Online Launcher has stopped working, and a close button the program. Any ideas on this subject? I tried to disable the firewall and antivirus software and restart the game, but it didn't work... I don't know what to do. The whole eror massage: Silkroad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available

  It is a file you need to edit in Notepad in the game directory. I would contact the manufacturer of the game as to what exact file. I have not personally done it, but I've seen this fix on other forums. MCP. MCDST. LVL 80

• iTunes has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available

  Original title: the iTunes does not work

  every time I want to launch the iTunes, my computer shows "iTunes has stopped working.  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Hi Winston,

  Were there any changes made on the computer before the show?

  I suggest you refer to the article to fix the problems with iTunes:

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  I suggest also refer to the link to support Apple iTunes:

  https://discussions.Apple.com/community/iTunes/itunes_for_windows

• Implement the application has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Try to install a CD "the Start-Stop software installation", but whenever I try, I get the following. Implement the application has stopped working. A problem caused the blocking of the program works correctly. Windows will close t he program and notify you if a solution is available. I sent the company and the school several times and have not yet received a response, maybe someone out there could help. Thank you!

  Ok.

  See if they have a patch for it.

  If this isn't the case, you may need to shopping for a similar program.

  Or repost in the Forum of programs on the link I gave you; they can learn more on this subject here.

  See you soon. Mick Murphy - Microsoft partner

• Windows 8 - Photoshop CS5.1 crashes at startup. Error message: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

  Hello!

  I got the student version software Adobe Creative Suite 5.5 Design Premium for several years now.

  When I got my computer Windows 8 I installed the software without problem.

  Last week when I tried to open Photoshop, I get the following error: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

  I disabled and uninstalled all of the Creative Suite and then reinstalled. I am able to open other programs, but still the same message for Photoshop.

  What can I do?

  I found that the problem was with Nik filters I used. The filters have been messing around with Photoshop initialization. I uninstalled and reinstalled the filters and now Photoshop works like a charm.

  It seems that this forum is dead?

  Fortunately, I managed to solve the problems on my own and figured out the problem...

• Neat has stopped working. A problem caused the blocking of the program works correctly.

  I installed the Neat/scanner software on my Windows 7 SP1 x 64 (with all updates) Workstation and I get following error;

  Neat has stopped working. A problem caused the blocking of the program works correctly.

  I worked long and hard with the support with no luck. They claim that they have made all that possible and since careful use .NET, it's a matter of Microsoft. I followed all the troubleshooting techniques that support Neat suggested.  I installed the latest versions of the software and drivers as requested. I repaired .NET and reinstalled .NET. I tried .NET 3.0, 3.51 and 4.5.1.

  neat 5.3 will start, then the error Neat has stopped working. A problem caused the blocking of the program works correctly will appear.  If I click on the red X or the button Close Program , this Neat program exit (of course).  However, if I move the window to error on the side, it seems that I can use neat 5.3 with no problems.  I can scan documents and navigate software very well.  The question is, how can I prevent the error message appears.

  I am skeptical that it is actually a Microsoft problem because if someone writes software for a specific operating system and it does not work, it must be a problem with this software, NOT the operating system.

  But anyway, if anyone has any ideas, your help would be greatly appreciated...

  Step 1: Make sure that Windows Image Acquisition (WIA) service is started and set to automatic. To do this, follow these steps:

  1. click on start-run, type "services.msc", click on OK.

  2 when the Services window loads, go to the "service Acquisition of Image Windows (WIA)", double click on it to open it,

  3. make sure the "Startup Type" says "automatic". If it isn't, use the drop down menu to change.

  4. If he once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on 'apply', and then click OK.

  I started having the same problem today, nothing worked, so I did what JamesHLiu suggested. Then when I started Neat, I ran it as an administrator - IT WORKS, for now :-)  Thank you for your answer, James.

• Error "ArcSoft Connect Daemon has stopped working. A problem caused the blocking of the program works correctly. » »

  The original title - the following message mean?

  I get the following message from Microsoft Windows every time I turn on my computer: ArcSoft Connect Daemon has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.      'Close program' is in a box for me to enter.  What does that mean?  What I'll do.  I get this message for about a week now.

  Hello

  Read the solution proposed by Don Varnau at this link

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/ArcSoft-connect-daemon-error-message/c4a5511e-65f9-4B9C-9a43-d9f631c32b73

  Hello

  Quick and dirty solution...
  Start > run > (type) msconfig > Startup tab > uncheck the ArcSoft program > restart.

  Plan b... Watch the programs at http://www.arcsoft.com/en-us/index.asp

  Check Add or remove programs for any of these programs and uninstall the program or turn off
  automatic updates or to automatically connect or what similar feature you find.

  Hope this helps,
  Don
  

  __________________________________

  See you soon.

• When I try to download games, I "WildTangent Games App has stopped working. A problem caused the blocking of the program works correctly. »

  Original title: Message from Microsoft Windows

  I downloaded WildTangent Games 2 years and never had a problem with my games and download new games. But for the

  beyond a few days, I can't play games or download new games. I can still play games I downloaded a year ago. When I try,

  a box appears from Microsoft Windows and says "WildTangent Games App has stopped working. A problem caused the program blocking

  works correctly. Windows will close the program and notify you if a solution is available. »

  But Microsoft has never sent a solution and I don't know how to deal with this situation. My name is Ramona Casse

  Thank you very much

  removed the phone number for privacy *.

  Hello

  1. you remember to make changes to your computer before the problem?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Temporarily disable all security software and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Test the issue in a clean boot State, and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  If the problem occurred recently, I do System Restore to the point that your computer was working normally.

• Error "this program has stopped working. A problem caused the program blocking work properly"when you try to open the Kodak Home Center

  Original title: notice of work stop Windows

  I recently installed an update of Kodak Home Center version for my printer.  When I try to open the Kodak program and print photos, I get the Windows message: "this program has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.  Does anyone have a solution to this problem?

  Hi JoeBuono,

  Follow the steps below:

  Method 1:

  Start your computer in a clean boot state and see if that fixes the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: Do not disable any program startup list Kodak when you perform the clean boot.

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Uninstall and reinstall the Kodak Home Center of your computer and see if that fixes the problem.

  See also: troubleshooting install or uninstall programs

  Method 3:

  See:

  Message: "AiO Home Center has stopped working" when editing and printing photos

• Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working.  A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is av

  Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working.  A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is available.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.