Cannot modify Siri to 'on' mode on Apple tv

Similar Questions

• cannot find siri on iphone or use 5 not in settings

  cannot find Siri on I - phone 5 not in the settings or use...

  Hello

  Siri settings are accessible via settings > general > Siri > activate Siri and, if you wish, allow also 'Hey Siri.

  If these settings are not available, check if Restrictions have been enabled:

  • Settings > general > Restrictions - Siri & dictation.

  More information:

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

• Cannot modify only directory attributes of reading, all the readers all the directories.

  Original title: cannot modify only directory attributes of reading, all the readers all the direcotries.

  For some reason now all directories are read-only. I have a check only reading tab, it goes through the process of change in all files in the subdirectory (I put their scrolling), click ok. But when I go in the directory again that reading is only check again. It is on my C: dirve all directories and all the other readers, including empty directories. Any suggestion would be appreciated. Thank you
  Bit defender shows no problem.
  SdS49r

  Hi SdS49r,

  I would like to ask you a few questions to better understand:

  (a) you connected to the administrator account? because you do not have the \n(Assurez-vous if you are not in the administrator account

  (b) don't you make changes on the computer?

  (c) have you created the file read-only?

  (d) what message do you get while changing the read-only attribute?

  (e) have you been able to change the attributes previously in your computer?

  You can scan your computer, then follow the steps in the link: http://www.microsoft.com/Security_Essentials/

  Try the system restore, it restores the computer to its point earlier while it was working fine.

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  
  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Error: "CHKDSK cannot continue in read-only mode" when you try to run it on the E: drive.

  Original title: CHKDSK does not work on my Windows 7 laptop

  I'm trying to run a CHKDSK on my external Hard Drive E: but everytime I try to CHKDSK E: in the shell, all I get is

  "This type of file system is NTFS.
  Errors found. CHKDSK cannot continue in read-only mode. »
  (That's all I get, nothing in between)
  I tried to make the Tools section of error checking, but it does not work there either...
  If this is a problem with the operating system, I don't have a Windows 7 disc because my laptop came with it pre-installed
  So, what should I do?

  Hello Rayzorexe,

  Thanks for the response back.  You are able to start your computer and get the recovery options?  From there, you can run "Command Prompt" and I want to know if you are able to run Chkdsk from there successfully.

  Are you the same response from the commands below:

  Type 'chkdsk e:' in the command prompt. Press 'Enter' to run the utility to check the disk in read-only mode. He locates errors but does not fix the

  Enter 'chkdsk e:/f' in the command prompt. Press 'Enter' to run the disk check and correct errors without analyzing bad sectors.
  

  Type 'chkdsk e:/r' in the command prompt, press 'Enter' to do a thorough analysis of the sectors and files and repair any problems found.
  

  Recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• All my applications and windows only open in Notepad who say, this program cannot be run in DOS mode, or this program must be run under Win32.

  I can't access one of my applications. or open all the windows. Because they are all open them in Notepad who say, this program must be run under Win32, or this program cannot be run in DOS mode. The only thing I can do is to use my browser and access the internet. This problem started in Wordpad and somehow put in Notepad.

  Hello

  This should help you.

  'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"

  http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

  "When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.

  Run the Mr.Fixit here or you can use the manual method it y to correct yourself

  http://support.Microsoft.com/kb/950505/en-us

  And also, read information please.

  'Change the programs that Windows uses by default'

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  See you soon.

• Error: "CHKDSK cannot continue in read-only mode" and "an unspecified error has occurred (766f6c756d652e63 3f1).

  I'm trying to run a CHKDSK on my hard drives. Whenever I try to do "chkdsk C:" or any other volumes (internal or external) invites of high command. I had

  "This type of file system is NTFS.

  Errors found. CHKDSK cannot continue in read-only mode. »
  (That's all I get, nothing in between)

  I have three internal volumes C: D; and E:. Running chkdsk on a volume any returns "CHKDSK cannot continue in read-only mode. Run with / f on C: will check the disk (no error) is restarted. Run/f on any other volume, I had "an unspecified error has occurred (766f6c756d652e63 3f1).
  Has received the same error in recovery mode, safe mode, using the account administrator or UAC disabled.
  Also got same error when you try to chkdsk on all external hard drives.
  I have formatted my E: and ran chkdsk on an empty volume, got the same error.

  Defrag works OK without any problems. External hard disks can be verified (no error and the bad sector) to another computer (win7 pro x 64).
  My external hard drives can be ejected without any problem. But ejection always fail after running "chkdsk /f.

  This computer is win7 pro x 86.
  Installed software: VMWare workstation 7, Microsoft Security Essentials, Visual c# 2010 express, Office 2003, Daemon Tools. DropBox

  Please help me to solve the puzzle.

  Thank you
  Hello

  After some debugging, I found that the ifsutil.dll reported an exception 'divided by zero.
  Finally I found that there is a fix from Microsoft for my netbook CPU (AMD C60).
  A Chkdsk command fails with an error not specified on a Windows Server 2008 R2 or Windows 7-based computer that uses a low frequency CPU AMD
  http://support.Microsoft.com/kb/2502789
  This fix solved my problem.

• Cannot open Microsoft Management Console mode author because of current computer policies

  Hello, I use Windows 7 Ultimate 64 bit.

  When I type "mmc", I get the following error. I am logged in as administrator.

  ---------------------------
  Microsoft Management Console
  ---------------------------
  You cannot open Microsoft Management Console mode author because of current computer policies.
  ---------------------------
  Ok
  ---------------------------

  Is this a normal behavior of the default Windows 7? If so, how to launch mmc or not if yes, how can I find the setting that causes this message?

  I found the parameter restrict access, which has been the Local computer policy > User Configuration > administrative templates > Windows components > Microsoft Management Console > prevent the user from author, Enabled.

  When I turned this option off, I could run mmc.

• Error: "CHKDSK cannot continue in read-only mode" while trying to perform the disk check

  : Title real: my backup is suddenly not recognized in Windows 7

  A backup I use regularly is currently not recognized - I went through several pages of suggestions without deleting the instructions to format the drive. I did chkd sk/p/r suggestions with this result:

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  
  

  F: C:\Windows\System32>CHKDSK

  The type of the file system is NTFS.

  Volume label is Micron disc for backup.

  
  

  CAVEAT! F parameter not specified.

  Running CHKDSK in read-only mode.

  
  

  CHKDSK checks the files (step 1 of 3)...

  11520 file records processed.

  Finished files checking.

  11 big folder files.

  0 incorrect file records processed.

  0 EA records processed.

  0 analysis of the cases handled.

  CHKDSK is checking the index (step 2 of 3)...

  53 percent. (12004 index entries processed 11514)

  Error detected in the $I30 for 5 file index.

  Error detected in the $I30 for 5 file index.

  12004 index entries processed.

  Index verification completed.

  
  

  Errors found. CHKDSK cannot continue in read-only mode.

  Then I tried to reassign the drive letter of the F to h: the display shows the file system is "RAW and the status is healthy, etc."  He doesn't see this as a NTFS format, even if the chkdsk identified it in this way with the correct volume lable, so I know it was to see the right player.  I almost all still on my coomputer - this backup is material that I could go back more old backup drives, but it's the best version of consolicated of my automatic backups of Win 7, so I didn't it wouldn't be pretty.  Am I out of luck?  Is this drive Kaput

  and should I give up on this?

  Thank you

  Hello
  I suggest you contact the manufacturer of the USB to the backup drive then try formatting the USB and check if the problem persists.

• Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer.

  HP Desktop, Windows 8.0.  Do a restore of Windows 8 on the hard drive.  Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure.  To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box.  Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all.  Finally resorted to restore to get the computer working again.

  How to exit this loop?

  OK, here's what I discovered.

  When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key.  This will put you in the command prompt.

  At the command prompt, type: bcdedit [then press enter]

  so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]

  This put the loop I lived and finished restoring Windows 8

• Cannot use internet in desktop mode, but can in Windows 8 mode. Help?

  Hey having a lot of problem with Windows 8 Pro cannot use internet in desktop mode but can in Windows 8 mode?

  Hey having a lot of problem with Windows 8 Pro cannot use internet in desktop mode but can in Windows 8 mode?

  I found myself with the same issue - although, for me, everything was working and then stopped at random...

  Since there is no useable answer to your question here, I begin troubleshooting me...

  What I found was a simple enough solution which seemed to reset the internet connection in desktop mode:

  1. to reveal desktop mode from the menu of charms (roll mouse over the right side of the screen)

  2. Select the charm of "settings".

  3. Select 'Network' in the parameter options

  4. right click on the network, you're connected to, and then select "turn sharing enabled or disabled.

  5 turn on network sharing

  This should reset your internet settings and retrieve your desktop mode in the loop...

• ORA-01102: cannot mount database in EXCLUSIVE mode in AIX after you have installed the database using dbca

  Hello!

  I have v7 IBM AIX and cluster HACMP set up two identical nodes included

  I have a head node after the installation of database using dbca I got error with the message:

  ORA-01102: cannot mount database in EXCLUSIVE mode

  Database cannot mount)

  Here is the information from the alert log:

  MON may 25 18:00:07 2015

  Starting ORACLE instance (normal)

  LICENSE_MAX_SESSION = 0

  LICENSE_SESSIONS_WARNING = 0

  SNA system picked latch-free 3

  With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST

  Autotune undo retention is enabled.

  IMODE = BR

  ILAT = 84

  LICENSE_MAX_USERS = 0

  SYS audit is disabled

  Commissioning:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With the options of partitioning, OLAP, Data Mining and Real Application Testing.

  ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1/

  System name: nodename

  Name of the node: nodename

  Version: 1

  Version: 7

  Machine: 0003F6E5D600

  Using the settings in /u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfiletestdb.ora side Server spfile

  Parameters of the system with default values:

  process = 500

  sessions = 772

  = 18G memory_target

  control_files = "/ ctl1/oradata/testdb/control01.ctl".

  control_files = "/ ctl2/oradata/testdb/control02.ctl".

  control_files = "/ ctl3/oradata/testdb/control03.ctl".

  DB_BLOCK_SIZE = 8192

  compatible = "11.2.0.0.0."

  db_recovery_file_dest = ' / backup/fra.

  db_recovery_file_dest_size = 100G

  undo_tablespace = 'UNDOTBS1.

  Remote_login_passwordfile = "EXCLUSIVE."

  db_domain = «»

  dispatchers = "(PROTOCOL=TCP) (SERVICE = testdbXDB)" "

  audit_file_dest = ' / u01/app/oracle/admin/testdb/adump.

  AUDIT_TRAIL = 'DB '.

  db_name = 'testdb '.

  open_cursors = 300

  diagnostic_dest = ' / u01/app/oracle '.

  MON may 25 18:00:08 2015

  PMON started with pid = 2, OS id = 14418020

  MON may 25 18:00:08 2015

  PSP0 started with pid = 3, OS id = 17891420

  MON may 25 18:00:09 2015

  VKTM started with pid = 4, OS id = 14090348 high priority

  VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms

  MON may 25 18:00:09 2015

  GEN0 started with pid = 5, OS id = 9109714

  MON may 25 18:00:09 2015

  DIAG started with pid = 6, OS id = 16449704

  MON may 25 18:00:09 2015

  DBRM started with pid = 7, OS id = 17104928

  MON may 25 18:00:10 2015

  DIA0 started with pid = 8, OS id = 13303950

  MON may 25 18:00:10 2015

  MA started with pid = 9, OS id = 12517522

  MON may 25 18:00:10 2015

  DBW0 started with pid = 10, OS id = 11993232

  MON may 25 18:00:10 2015

  LGWR started with pid = 11, OS id = 15401010

  MON may 25 18:00:10 2015

  CKPT started with pid = 12, OS id = 6619318

  MON may 25 18:00:10 2015

  SMON started with pid = 13, OS id = 16515222

  MON may 25 18:00:10 2015

  RECCE has started with pid = 14, OS id = 13172906

  MON may 25 18:00:10 2015

  MMON started with pid = 15, OS id = 15794324

  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...

  MON may 25 18:00:10 2015

  MMNL started with pid = 16, OS id = 18546742

  commissioning or shared server 1...

  Environment ORACLE_BASE = / u01/app/oracle /.

  MON may 25 18:00:11 2015

  ALTER DATABASE MOUNT

  sculkget: failed to lock /u01/app/oracle/product/11.2.0/dbhome_1//dbs/lkTESTDB exclusive

  sculkget: lock held by PID: 3670226

  ORA-09968: cannot lock file

  IBM AIX RISC System/6000 error: 13: permission denied

  Additional information: 3670226

  ORA-1102 marked during: ALTER DATABASE MOUNT...

  But if I install the darabase even dbca on node secondary, all installed and executed successfully.

  But in the two nodes even permissions, user oracle and oinstall group ID identified the same and $ORACLE_BASE and $ORACLE_HOME user owner oracle and oinstall user group.

  A someone has encountered this problem and solved?

  Thanks in advance!

  Hello

  you are using IBM AIX PowerHA for your database (active/passive) configuration. then you just install the binaries 'once' on one of the nodes. then coordinate with your operating system administrator to configure the fail the test scenarios.

  for your question. before you start the database, make sure that there are no "orphaned" oracle process using the UNIX grep command:

  $ ps - ef | grep ora

  Kill the oracle of the hanging of the process to release the lock on the database file handle:

  $ kill-9

  I hope this helps.

  Kind regards

• I have an account but cannot modify/use the tools.  I went from computers a week ago.  Help, please.

  I have an account but cannot modify/use the tools.  I went from computers a week ago.  Help, please.

  It should not, but you will need to download the right software to use. Adobe Acrobat Reader is what you are currently using. This is why you don't have the tools you are used to.

  Adobe Acrobat (not Reader), that's what you signed up for. He has the tools, you need and are a completely different, even if application you may have initially subscribed by using Adobe Acrobat Reader.

• Cannot modify available phone model union

  I used the free model, which is the union and pretty much done with office management; However, no matter what I did, I couldn't change phone available - would really appreciate if someone can help me - thanks

  Cannot modify the Master Page, so if the homepage is blank and master applied includes the content of the page then we cannot change this. You can publish the same site British Colombia as a place to test, just to isolate the problem.

  Thank you

  Sanjit

• Acrobat Reader DC - cannot modify or delete pages

  Acrobat Reader DC.  Cannot modify or delete pages.

  Hi luciek42334613,

  Are you sure that you open the PDF file in Acrobat Standard DC not in Acrobat Reader ms?

  To change the PDF files, you need to open it in Acrobat Standard DC.

  Kind regards
  Nicos

• WARNING: Cannot modify header information - redirects with the server behaviors

  I know it's an old question, but I can't find the answer.  I get an error when you use the update of the server behavior redirects the Add record  I get the error message: warning: cannot modify header information - headers already sent by (output began to...)

  I deleted as much white space before the header() function and I still get the error.

  <? php require_once('.. / Connections/Old4thDB.php');? >

  <? PHP

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  $editFormAction = $_SERVER ['PHP_SELF'];

  If (isset {}

  $editFormAction. = « ? ». htmlentities($_SERVER['QUERY_STRING']);

  }

  If ((isset($_POST["MM_update"])) & & ($_POST ["MM_update"] == "UpdateVarietyForm")) {}

  $updateSQL = sprintf ("setting a DAY various SET varietyName = %s varietyType = %s varietyAlphaAcidGeneral = %s, varietyBetaAcidGeneral = %s, varietyOld4thAA = %s, varietyOld4thBA = %s, varietyEssenOil1 = %s, varietyEssenOil2 = %s, varietyEssenOil3 = %s, varietyEssenOil4 = %s, varietyEssenOil5 = %s, varietyEssenOil6 = %s WHERE variety_id = %s",

  GetSQLValueString ($_POST ['varietyName'], "text").

  GetSQLValueString ($_POST ['varietyType'], "text").

  GetSQLValueString ($_POST ['varietyAlphaAcidGeneral'], "text").

  GetSQLValueString ($_POST ['varietyBetaAcidGeneral'], "text").

  GetSQLValueString ($_POST ['varietyOld4thAA'], "text").

  GetSQLValueString ($_POST ['varietyOld4thBA'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil1'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil2'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil3'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil4'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil5'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil6'], "text").

  GetSQLValueString ($_POST ["'recordID"], "int"));

  @mysql_select_db ($database_Old4thDB, $Old4thDB);

  $Result1 = mysql_query ($updateSQL, $Old4thDB) or die (mysql_error ());

  $updateGoTo = "varieties.php";

  If (isset {}

  $updateGoTo. = (strpos ($updateGoTo, '?'))? « & » : « ? » ;

  $updateGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $updateGoTo));

  }

  @mysql_select_db ($database_Old4thDB, $Old4thDB);

  $query_rsUpdateVariety = "SELECT * FROM variety";

  $rsUpdateVariety = mysql_query ($query_rsUpdateVariety, $Old4thDB) or die (mysql_error ());

  $row_rsUpdateVariety = mysql_fetch_assoc ($rsUpdateVariety);

  $totalRows_rsUpdateVariety = mysql_num_rows ($rsUpdateVariety);

  ? >

  Am I missing other setups/configurations that could cause this?

  You forgot the most important part of the error message. "Output started at..." tells you where the production has started, guiding you to correct the error.

  The most common cause of this error is a space outside of an include file PHP tags. Most likely guilty is one or more new lines after the closing PHP tag in Old4thDB.php. Remove the closing tag PHP in this folder will be probably solved the problem.

  Another possible cause is using the BOM (byte order mark) on a PHP page. Make sure that the check box for the BOM is deselected in the Save dialog box.