Problems with word and PDF after computer crash. Error "user has access privileges."

Problems with word and PDF after crash

My computer crashed and I had to run the recovery disk, the repair option, so he could run again. It does not format my computer but I had to re - install several programs. I reinstalled my copy of office for example.  I have an external hard drive where I put most of my files but since installing the recovery disc, it does not open some Word documents and gives a message error "user has not access privilege." It's the same thing with some pdf files. What can I do?  Please help because I can't open some of my documents from the University.

Hello world
I would like to just say thank you for your help and the problem is now solved.  In the end I paid someone to sort it out.  He explained that it was something like permissions for some of my files were owned by my old operating system and after that my computer crashed and I had to put through the recovery disc these permissions have been lost.  He told me that he had a program that looked for the old existing and re-installed.
Thank you.

Tags: Windows

Similar Questions

  • problem encoding with word and pdf doc - error message - file conversion - Select encoding to make your document readable

    Hi, until an hour ago, I had no problem opening documents adobe, or word documents, however, when I try to open a pdf document is opened correctly, I have to save it, and then open with adobe, when I try to open the Word document of display of the error message - file conversion, select the encoding that makes your document readable? help please how to do everything back to normal?  I think I caused the problem when I tried to open a Word / PDF of my removable flash drive, can someone please tell me how to solve this problem, without a questionable download?

    Can I save as and then open with - and pdf opens the file - but before that I didn't have to do it just opened automatically

    Thank you.

    J

    I just stumbled upon this problem there is, it's an easy solution to calm. If it's a .pdf to locate the file right click and select open with, then choose program select by default, choose the adobe reader software. What it does for each .pdf file it will use adobe reader instead of trying to use the wrong program to open the file. Same thing with .doc and .docx files only instead of adobe reader choose microsoft word

  • Problems with WRT54GS and EasyLink after the addition of the Comcast Digital phone.

    I had a working network. Cable modem (Comcast), WRT54GS, 2 PCs per (an XP/SP3, a Vista Home Edition SP1), 2 cable PC laptop wireless (an XP/SP3, a Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as a network printer). Everything was going well and worked.

    Then, I added the Comcast Digital phone. Obviously, they went for a new modem cable modem cable with the phone service option. Now I can't print to the wired Vista PC OfficeJet and EasyLink displays "initializing" for too long I'll wait (5 minutes).

    Finally, I must kill EasyLink from the Task Manager. Any help or ideas appreciated!

    I solved the problem. It turns out the new modem cable and problem with EasyLink initialization were 'diversion '.

    The problem turns out to be a classic network problem! The Vista PC wired had a wrong IP address. The wireless PC XP has the printer configured with the name of network instead of the network address (IP, for example).

    When I deleted the printer on the Vista PC and added to the correct address everything worked fine.

    Apparently, the printer got a new IP address of the server on the WRT54GS after installing the new modem. In addition, it seems that Vista doesn't has not report an error of communication to a network printer, but for a direct USB connect.

  • Problem with email and SMS, after 1.3.5

    First, I would like to say that I like the Pre. Up to this point, he's been perfect - I have a replacement, but it's because I gave up (bad angle, bad location, broken screen). However, following the 1.3.5 update I have now a problem quite important with email and sms - I can receive messages and email, but not send them.

    I have two e-mail accounts. My personal account is with earthlink. My business account through an ISP that uses the domain name of my employer. I do not use Microsoft Exchange or Outlook. I tried to remove and reinsert accounts and that did not work. I can receive messages but receive error messages when I try to send.

    Ditto for Messaging. I don't use it very often. But yesterday I receive a text message and tried to answer and got the error message.

    I power the phone off every night because I have a landline phone and use it as the main telephone at home.

    I looked around bulletin boards, trying to find a solution for this.  Has anyone had this problem and it was resolved?

    Thank you.

    I forgot to add that there is a stock of pre. There is no patch or homebrew apps.

    Edit:

    I found a fix for the problem of e-mail messages on precentral and this Council a few months ago. The info came in a Google search and not the research councils, which is frustrating.  Here is the info and the link.  I wish really that Palm info on this work around on their site, or at least makes it easy for people to find.  The solution is the last post in the thread linked below:

    Had the same problem.  Checked with Earthlink - no help.  Checked with Sprint - without help.  Checked with Palm - no help.  Finally, here's what worked:

    Delete the earthlink account and start again.  When you do - it's the key - set up the account manually.  If you use the default settings of pre and try to change the settings it will not fix the problem. Your settings for outgoing mail must be:

    "smtpauth.earthlink.net.

    Use authentication in position 'on '.

    user name is your email address

    your password by e-mail

    Port "587" value

    encryption 'none '.

    Again, the key is to set it manually.

    fix SMTP e-mail

    Message edited by starburst42 on 06/01/2010 12:08
  • problem with image and pdf files to print

    Hello

    When I want to print images and PDF files in windows 7, it takes too much RAM space so small capacity it has (for example, the file has 52 KB capacity, but it takes 21 MB of RAM)

    and I have to wait until this file (image or PDF) completely buffered in RAM, and that is problematic for me.

    Help me please.

    Thank you

    Hello Amirafshari,

    Thanks for posting your query on the Microsoft Community.

    We need to know the following information to isolate the problem:

    1. When you print files no PDF, you have the same problem?
    2. What are the specs of your PC?
    3. Where are the files located? Is this an internal or external storage device?
      • If the file is located in your external storage space, you can transfer into your internal storage space first before printing.
    4. Have you tried the activation and deactivation of your print spooler? If this isn't the case, please follow the steps below:
      • Go to CMD.
      • Type "net stop spooler" and press ENTER to stop the spooler.
      • Type "net start spooler" and press ENTER to re start the spooler.

    Let us know how things are going.

    Kind regards

    Jamille Nar

  • Problems with sleep and stopped after upgrade to Windows 10

    Hello

    So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

    Any solution to this problem?

    Thank you.

    1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
    2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
    3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
      • In Control Panel, select administrative tools, and open Services.
      • Go to Windows Update and double-click it to view its properties.
      • Click on stop to stop the service to run.
      • Change the Startup Type to manual, and then click OK.
    4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
      • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
    5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
    6. Change back the setting of Windows Update Services to manual automatic (delayed start).
    7. Restart your computer.
    8. Rejoice!  You can finally sleep and stop again.

    -DanG

  • I have a problem with scrolling and typing on the computer.

    Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

    as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

    Hello

    Thanks for posting your question in the Microsoft community.

    I see that you have a hard time to work with the mouse.

    1. What is the brand and model of the mouse?
    2. The problem occurs on any program or when you perform a task in a particular program?

    Try these steps and see if that solves the problem of performance of your mouse.

    Method 1:

    You can check that the mouse buttons are set correct.

    Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

    Change the settings of the mouse

    http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

    Method 2:

    You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

    a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
    c. click on the Driver tab, and then click uninstall the driver.

    d. restart the computer and it will automatically re - install the drivers of.

    Note:

    You can also update mouse drivers by visiting the manufacturer's Web site.

    See this link for more information:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Let us know if you need help on this question or any question about Windows.

  • After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

    After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
    all except the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    ------------------------------------------------------------------------------------------

    If no joy, see Toshiba Support and/or their forums:

    Toshiba support and drivers
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba Support Forums
    http://laptopforums.Toshiba.com/

    Contact Toshiba
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    I hope this helps and happy holidays!
    Rob - bicycle - Mark Twain said it is good.

  • I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

    RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

    Hi I'm new to these fornums

    I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

    I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

    The product key you entered will not work with this edition of Vista

    I know that most people are trying to say to activate by phone, but this option is not available

    Help, please

    Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

  • PROBLEMS OF VISTA WITH WORD AND EXCEL

    I'm having problems with microsoft word and excel.  I get the following error message:

    "Host process for windows services stopped working and was closed.  Wiindows will notify you if a solution is available. »

    Of course, I never heard with a Windows solution.

    •   

    Hello SAFEERN,

    It may not be a problem with Word or Excel.

    Read the article here mentions several problems that can cause the error "host process for windows services stopped working and was closed".

    Please answer back with an update so that we can know if one of the resolutions helped to solve your problem.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Recently, I have a serious problem with LR6 and photos of my imports of. After I imported my photos, they disappear... say they become all black.

    Recently, I have a serious problem with LR6 and photos of my imports of. After I imported my photos, they disappear... say they become all black.

    Hi thomasp175720,

    Please follow the steps if you see black pictures after importation into Lightroom below:

    1. Turn off apply tone auto under Lightroom preferences settings

    2. restart Lightroom and then re-import images

    Kind regards

    Tanuj

  • I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

    I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

    I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

    After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

    A few external links to help you set permissions:

    MAC

    OS X Yosemite: set permissions for items on your Mac

    WIN

    Set, view, change, or remove permissions on files and folders

    r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

    Kind regards

    Ashutosh

  • Problem with AVG and Windows

    A.V.G. IN INTERFACE WITH M.S.

    * original title - A.Programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

    If your computer is actually turn off and isn't just pass in "Sleep" or "Hibernation" during a scan, and this happens only when you run an analysis, then I must say that yes there is a problem with this security on this computer suite.

    Personally, I'm worried about the security suites.  They developed gradually bigger and bigger, which requires more system resources, and when they fit well with a particular operating system, they can interfere with its normal functions.  My preference is to use a good antivirus and Windows Firewall.

  • problems with Vista and msn

    my laptop had vista business on it originally, it crashed a year ago and the store put windows 7 Home Edition premium on it, last week I had to have my hard drive changed due to problems with it and computer scientist put my vista business back on it, I thought I was brilliant as always I like vista , the problem is now I can not MSN up on it it keeps saying IE he blocked, IE 9 will not download, I play Facebook games and many of them won't load properly, tried to install service pack 2 for vista and it goes on to say that I have to install service pack 1 in the first place , its already there and updated pack 2 but still will not download. Someone at - it answers or useful tips or advice they can give me to have an entirely new work laptop

    Yes 100% positive sp 1 is installed and updated, already tried all the links you have kindly posted, was trying to do it for 12 hrs before I posted this question, I have 64 bit but that he already knew who didn't need the computor to tell me, I finally returned to the it guy and he discovered that the lap top returned to the original IE 7 when the hard drive has changed it dosent msn so therefore all the problems, he finally put IE 9 for me and the two vista service packs and support now msn works finally done my f/b, so Happy Days

  • Problem with opening Windows store after upgrade to 8.1 Windows

    Original title: cant access window 8 app store

    I had a 8.1 window update to my laptop.but 8 window whenever I try to open appstore, I gives me error that cannot cannot to the authentintion, due to errors, .i tried to open AppStore 3 g, wifi and broadband connection.but I still get the same error.

    Help, please.

    Hello

    Please contact Microsoft Community. I understand that you have a problem with opening Windows store after the upgrade to Windows 8.1. I appreciate your efforts to solve this problem. I've surely you will help solve this problem.

    To better understand the issue, I would need more information on your side.

    1. are you able to open other Apps of metro?
    2. What is the full error message?

    This problem might have occurred because of these reasons:

    1. Corrupt the App Store.
    2. Incorrect settings App.
    3. Corrupt system files.

    Try the steps listed here and see if it helps:

    Method 1:
    I suggest to try the procedure described in the article to reregister the App Store and check if that helps.

    http://blogs.msdn.com/b/notime/archive/2013/10/21/10458031.aspx

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

    Method 2:
    If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

    Use the System File Checker tool to repair missing or corrupted system files
    http://support.Microsoft.com/kb/929833/en-us

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

Maybe you are looking for

  • new songs

    Hello world! So, I've been an avid user of iTunes from 2013, I really scour. I use discogs and tried to capture a time/movement in history for the styles of music that I like. And I work from when I go early in the morning and sometimes in coffee sho

  • Failed to start NB200

    Hello My NB200 freezing on bios photo from the beginning. There are several discussions about on various forums about people having this issue and nb200 nb205, apparently for the most part bought around August 2009. Some people have suggested 1 - to

  • SP4600 - hardware failure message

    Hi, (sorry, but my English is not good:-D)) I bought an old SP4600 (type SP460E-038LR-FR) with formatted HARD drive (so less potential drivers and software utilities). For the first 1/2 in. I m of HDD installed WinXP Home, on the second space 1/2 I m

  • What happened to my show desktop icon in the Quick Start menu when I upgraded to Firefox 4?

    I value and often use the button SHOW DESKTOP which has always been in my QUICK START MENU... until I recently upgraded to the latest version of Firefox because he promised to be faster (and my experience online in spite of paying for "high speed" is

  • Unable to write to the external hard drive

    I am trying to copy files to an external hard drive FireWire 800 and I get an error this file "names are too long for the destination" (even if the file names are just 1 short word). Reading files from the external drive works fine. Player is a 6 TB