Cannot open DXF files, incorrect message error etc etc thanks file

Similar Questions

• External hard drive suddenly cannot open it give the message error "you must format the disk in the drive until you can use it", and your hard disk is 0 bytes

  External hard drive can not suddenly open - fixed

  my external hard drive worked very well all the time, but suddenly I can't open it more, when I tried to open it, it gives the error message "You must format the disk in the drive until you can use it" and my hard drive is 0 bytes, average there is no file in the hard drive. Average, all the data inside hard disk are gone!

  Hello muhammad.

  Before you do anything with this player, you can search online for some data recovery utilities so that you can try to recover your data.

  What operating system do you use?

  Have you tried running chkdsk on the drive?

  Let us know.

  Best regards

  Matthew_Ha

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got an error message cannot open output file. Can you help me please?

  I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got the error message cannot open output file.

  The file can be uploaded incorrectly. Could you it redownload again from http://getfirefox.com?

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• Error message - Windows cannot open this file after downloading program

  After several days in offline mode, I went online to update Microsoft Security Essentials and click on analysis complete.  It took an hour.  After that, I found that all my programs were virgins, almost of all of the standard microsoft Microsoft Security Essentials is.  I tried to download it again, plus others such as adobe acrobat, but all said "windows cannot open this file".  I asked help from Microsoft but received access denied.  I feel like an illegal immigrant, as all the doors were closed.  What does that mean?  My OS would be illegal?  It is Windows XP and was purchased new in the retail price in 2004 and has only once been out of my hands when I sent it repairs and have 2 GB ram added.  Any ideas?

  Hello

  1. What is the full and exact error message?

  Try the steps from the following link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/when-trying-to-open-desktop-icons-get-message/e75fd1c3-F772-E011-8dfc-68b599b31bf5

  I hope this helps.

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• Cannot open the file due to a header error Error Message.

  Hello

  If you're still trying to import an audio file (wav) in Adobe Premiere (or any other program) and get this error "Error Message.
  Cannot open the file due to a header error"

  Try to download this utility (found my copy Guide Fassoft Audio Converter of Tom.  I imported my wav file in the utility and then converted 'back' to another wav file in another folder.  And fixed it.

  There is a limit of 5 minutes on the trial version, but my audio file was less than 5 minutes, so it worked for me.

  I don't know that there are other similar utilities, so try any utility "Audio Converter" to see if it will fix your audio file.

  It worked for me.  Perhaps others have alternatives they would recommend.

  Rowby

  Hello

  I found a better (free!) utility to do this. (The free version of Fassoft Audio Converter has audio length limits).

  It is called MediaHuman Audio Converter and I found this site: http://www.mediahuman.com/audio-converter/welcome.html

  MediaHuman has worked on my windows 10 computer and does the work to 'fix' the question header error. Import the wav damaged and then exported to a new folder.

  Rowby

• Error message: Windows cannot open this file

  Whenever I click one of my contacts in my contacts folder, I get a message that says Windows cannot open this file and gives me the choice to open with another program or search the Internet for a program to open my file of contacts.  Can someone help me with this please?

  Right-click on any contact, and then click Open with...  Then select Windows Contacts (it may have been changed to another program) and check the box at the bottom that says always use this program to open this type of file, and then click OK.  If the Windows Contacts is not listed, click Browse and find the main executable file for Windows Contacts add the program then select it and check the button.  To help you find this file, go to the Windows Contacts shortcut in the menu start / all programs and right click on it and find out the location of the target - is where you ought to watch.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message "Windows cannot open this file 5882103.rbf" to start the Windows XP machine.

  Original title: Windows cannot open this file 5882103.rbf.

  I get this pop-up window when ever I turn on my computer or restart it... Anyone know why this is, or how to solve this problem?

  Hi presler19,

  I recommend you completely configure the computer in a clean boot state by following the article provided in the previous post. Later, check to see if the problem persists.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get a message saying "Windows cannot open the file...". »

  I had a lot of problems with infections, so I was running many scanning programs.

  After getting my computer almost completely cleaned, I ran the Super Anti-Spyware program.  We find 3 infections, which I'd delete (I don't have no way of knowing that I removed).

  Since then, whenever I try to open a program, or even Windows Update, etc., I get a message saying:

  "Windows cannot open the file.  To open this file, Windows needs to know what kind of program has created.  Windows can go online to search automatically, or you can manually select from a list of programs.

  When I go on the web, I get a lot of options, which are almost free scans that then charge for fixing.  I am also very scared that I can also get another infection from these sites.

  I hope someone can help me solve this problem.

  StanEp

  Yes, each method is a set of measures to try and then go ahead and try each one separate.

  2 method will reset the executable (.exe) extension that will allow you to open programs. It is not clear what exactly you are trying to open so that it can have no effect.

  Keep in mind that the damage caused by malware can be irreversible, in the case of relocations are necessary.

• I want to play Freecell and solitaire that came with my PC, but I get this error: "Windows cannot open this file: free cell.exe.mui.»

  Can help please I want to play freecell and solitaire that came with my pc but I get this error message... Why would he do that? How can I solve this problem?

  original title: windows cannot open this file: free cell.exe.mui.

  Hello

  1. don't you make changes to the computer?

  These can help you:

  Method 1: Perform a system restore

  To get the procedure perform system restore, open the site mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2: Clean boot

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: To set the computer back to start normally, use the step 7 in the same link.

  Method 3: Check the new user account

  Open the site mentioned below for steps to create a new user account

  http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account.

  I hope this helps.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: Windows cannot open this file

  I am trying to download a theme to apply to Windows 7. After download and I click on it, I get an error message saying that Windows cannot open this file. When I click on the link to watch online for a program to open it, windows says that it cannot find a way to open it. Then, how to make a theme for Windows 7 after it is downloaded.
  See you soon,.
  Abdukarahaman

  Where did you download the theme? Have you downloaded it from the Gallery of official themes for Windows 7?

  Have you tried to download it again and see if it works?

  Please note that themes work only in Windows 7 Home Premium, professional, Enterprise and ultimate edition.

  Themes are not supported in Windows 7 Starter or Home Basic editions.