Satellite Pro A100 does not connect to the internet if the power adapter is plugged

Similar Questions

• Satellite 1800-814 does not start if the power adapter is plugged

  Hello
  I have a problem with my 3 year old, 1800-814.
  It all started with the sudden Windows crashes. He ran sometimes smooth, sometimes he just hung up. So I decided to reinstall the laptop. My problem is when it is plugged by pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 seconds. On battery it starts every time. What can I do? A defect material or just dust somewhere?

  Thank you

  Jens Grieger

  Hello

  It could also be something wrong with the electronic power supply on the motherboard.
  It s is not possible for the user to fix it. In such cases, the best way is to contact Toshiba service in your country.

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• Satellite Pro L300 does not connect to the internet using a broadband

  Hello!!

  I reformat my laptop with Windows 7 a few days ago.
  When I tried to use a broadband internet connection, it won't work.

  Pls help me on this.
  Thank you.

  Hello

  I assume you are talking about WLan.
  You have installed Win 7 as a new OS.
  Have you installed good WLan driver?
  The WLan card is recognized in Device Manager?

  If so, have you turned on the wireless network adapter by using a switch in front of the laptop, and FN + F8?

  LAN working properly?

• Satellite L40 - 14N does not connect to the WLan router

  Bought two portable Satellite L40 - 14N as Christmas gifts and one of them does not connect to the wireless router.
  Is the error that says "error message unknown" try please login again.

  The wireless network appears in the list of networks available with a strong signal. Notepad attempts to connect but the error 'wireless link failed for an unknown reason. " Made a comparison with the other laptop that works very well and the configurations appear to be identical!

  Tried it on wireless network from a friend with the same result. All suggestions, am pulling out my hair at this point.

  Seems to be a Vista issue.

  I found this article Ms knowledge base:
  http://support.Microsoft.com/kb/928233/en-us

  You need to add a value in the Windows registry.

  1. Click Start, type regedit in the search box, and then click regedit
  list programs.

  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE es\Tcpip\Parameters\Interfaces\ {GUID}
  This registry path, click the (GUID) subkey that corresponds to the
  Network adapter that is connected to the network.

  3. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  4 new value #1, enter DhcpConnEnableBcastFlagToggle, then
  Press ENTER.

  5. right click on DhcpConnEnableBcastFlagToggle, then click on modify.

  6. in the value data box, type 1 and then click OK.

  7. close the registry editor.

  concerning

• Satellite Pro A100 - unable to connect to the internet

  I'm unable to connect new Satellite Pro A100 to my youngest daughter to the internet.
  I have a cable modem Netgear DG834 router that works perfectly with my desktop pc and laptops other two of my daughter.
  I checked all the settings, but to no avail.

  Can anyone suggest anything that could restore the balance of my household!

  How have you tried to connect the laptop to the router?
  A you connect using a LAN cable?

  Are the firewall enabled?

  Please publish more details!

• Mac Pro 2013 does not connect to the hard G technology drive

  Hello

  I recently bought a Mac Pro and I am trying to transfer files from my hard drive mini 1 TB of G technology itself. The files came from a backup who was recently transferred to my 2011 macbook pro. I tried using cord USB 3.0 for the Mac Pro doesn't have a firewire plugs, but it does not recognize my hard drive. The hard drive is not showing any signs of work because I don't hear the fans turn on the player. The hard drive connects perfectly to my macbook pro via firewire, so should I buy a bolt of lightning for this firewire adapter? I really hope that I don't need to buy a new external, but I'd love to hear a few options for this issue, it would be greatly appreciated.

  Best regards

  May be that the USB port does not provide enough power. Sabrina drve is provided with a plug that allows to connect a plug to an AC wall power supply.

  The manual

  http://www.g-technology.com/sites/default/files/fields/field_files_pdf/product/g-drive_mini_3.0_usermanual_r3_1015.PDF

  Neither the Web site

  ve http://www.g-Technology.com/Products/g-Drive-Mini-1-TB-External-Desktop-Hard-DRI

  give the voltage of power

  It works via the USB port on your MacBook? The USB part is maybe defective.

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?

• Satellite Pro c660 does not connect to another wireless after format

  Hey all,.

  I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).

  After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.

  After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.

  The ideas people? More missing drivers?

  PS - I really don't want all that toshiba nanny software on the laptop.

  Thanks in advance!

  > Any ideas people? More missing drivers?

  If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.

  Are you abele to connect to other networks wireless at home?

  Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
  But note; This must be done only for testing purposes!

  You should also check if the MAC address filtering is disabled in the settings of the router.

• Satellite C660 now does not connect to the printer via Bluetooth

  I have a very small domestic network - 2 of the Satellite C660 using Windows 7 Home premium and a printer Photosmart more connected through BT Home Hub work all fine until a computer laptop suddenly cannot connect with the printer, well located 1 m from each other.

  Connection Internet is fine - and another laptop works perfectly. Message from the printer on statement failed, on examination, it simply records as "error."

  Any ideas of solution?

  Hello

  From this point it's hard to say what's wrong.
  In my opinion, you must reset all settings and configure the connection to the printer again.
  Reinstall the software that you have installed in the past.
  Also recommend check that the support from the manufacturer printer pages a few FAQ, HowTo, etc...

  Since your laptop can connect to the internet properly, it cannot be a laptop problem

• Satellite C660 WIFI does not connect with the channel 1 of the router

  Hello

  I have this problem for several months. I connect my laptop with the D - link DIR-615 as a WAP browser.

  I can't remember, but the fact is that I can't connect more with channel 1 of my WAP.
  Connection with the other channels is no problem.

  Other laptops or the available have no problem connecting to channel 1.
  He's tried a recovery, remove and reinstall the driver for my WIFI.

  All know what to watch?

  Kind regards

  Jacky Deschepper

  Where have you changed channels settings: within the router or the wireless network adapter?
  Is that it s any laptop you are using. It s always a matter of the WLan card that is integrated.

  Usually, you can change the Wlan card settings in the properties.
  Go to Device Manager-> Wlan card-> right click Properties-> Advanced tab
  Here, you would be able to change the available settings.

• Satellite Pro A100 does not illuminate

  Hello

  I have problems with my computer toshiba laptop, suddenly the other day, he does, instead when the power button is held three lights... turn the caps lock light and lighting under the f10 and f11 keys, when plugged into current alternative battery light turns orange.

  I tried to remove the moemory models and hard drive, but nothing works, nothing changes.

  any help would be appreciated.

  Thank you, tom

  Hello!

  You have the same problem, if it is start with battery or AC/DC adapter?

  In the worst cases, you need help from the ASP. The technician must check your laptop to make sure that the part or parts are defective.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite A120: Microphone does not work when the power cable is unplugged

  I have a Toshiba Satellite Pro A120, which has just begun to play up...

  I regularly record music of my DJ Mixer in microphone of my laptop entry, recording in Adobe Audition.

  Because the power supply makes a buzzing sound, I can't register with the power cable plugged... If I always record with the unplugged power cable, running off battery.

  I've never had any problems before, but what has caused the problem, I now, was earlier the battery ran out while recording, put the laptop into hibernation mode.

  Since then, I can't register with the power cable disconnected. He recorded only with the cable - which is not a good cause snoring.

  It is not a problem with hearing, because in Windows Vista its implemented the problem proved too. As soon as I unplug the power cable, microphone disappears from view.

  I used to work in IT support, so I'm not a technophobe - but I can't for the life of me works why it would suddenly start to occur, power is not related to the entrance it is micro... !

  One of you lovely people have ideas? I checked power options and the Device Manager to see if theres no hardware issues, but there isn't.

  I also reinstalled my sound card drivers.

  It's strange. I guess you tried a boot cold fresh. Hibernation can sometimes cause problems with the devices.

  Try to update the BIOS.

  If all else fails, you may need to reinstall Windows. (Backup your data and run recovery by holding down the button reset during power on)

• Satellite Pro U400-247 - noise static when the AC adapter is plugged

  Hello

  I got by Satellite Pro U400-247 and you have a problem with the sound.

  Everytime I plugg in adapter (external power supply) there is a kind of droning noise static noise when I use the audio out (headphones).

  Does anyone have a solution for this problem?

  Thank you
  Marcus

  Hello

  I guess that's not happed running the laptop on battery only. Right?

  I think that this issue is released to a grounding problem.
  I read different forums on this kind of question it.
  Usually use the 3 cord power cable should help get rid you of this noise.

  In your case I would recommend asking for cord 3 power cable (maybe you need another adapter that supports the 3-wire power cord) to a Toshiba authorized maintainer.