Cannot open ' NoteStore.sqlite 'file because its format is not correct.

Similar Questions

• cannot open a wmv file because a required codec is not available

  MacBook Mac OS X Version 10.7.5

  2.16 GHz Intel Core 2 Duo

  2 GB 667 MHz DDR2 SDRAM

  QuickTime 7.7.1

  Try to open a wmv file, I received the following message

  

  When I go to "Tell Me More", I don't find an answer there.

  Any suggestions?

  QuickTime no has ever himself supported the opening of the WMV files, it's always the case. There is a piece of third-party suppliers of software that can add this feature known as Flip4Mac, it was free to simply play WMV files but is now no longer free. (Microsoft in the past were subsidizing the cost of this software.)

  See http://www.telestream.net/flip4mac/overview.htm

  Your other option is to use something other than QuickTime, in which case the free VLC software will do the job, you can get VLC here. http://www.videolan.org/

• Cannot open some PDF files despite its drive 11.0.10 installed in windows 10

  Hi, I installed Windows 10 and Acrobat Reader 11.0.10. I can't open some PDF files. Although it worked well in windows 8.1. But since the update to windows 10, I am unable to launch adobe reader software.

  I reinstall the drive 11.0.10 but do not solve the problem.

  It shows me this message when try to open the drive root directory.

  

  This case try opening any file directly.

  

  I took the measures so far

  1 reinstalled drive several times.

  2 used cleanup tool Download Adobe Reader and Acrobat tool - Adobe Labs.

  3 tried to install the player in a different directory.

  4 rise to earlier version of reader.

  5. run solve several times.

  but the problem is not yet solved, please provide a feasible solution in this regard.
  

  problem solved...

  Rename the file AcroRd32.exe in Adobe.exe

  It worked for me

  Here are some interesting by Adobe and Microsoft answers

  

• Paint cannot read this file. Is not a valid bitmap file, or its format is not currently supported. »

  Suddenly, for the first time, I get this message why I try to open my Word documents.  Obviously, I did something to my installation; I normally do not use Paint.   I suspect that it is an easy fix, but I don't know where to start.  I would appreciate any advice.

  It is not surprising that paint cannot figure out what to do with a Word document.

  It sounds as if your file associations have become confused.

  Find a Word doc, right-click on it and select open with > choose default program

  Select Microsoft Word from the list of recommended programs, don't forget to check the box "Always use the selected program to open this type of file", and then click OK.

  

• When I try to open LR, I get the following message, the lightroom catalog file named "lightroom catalog 5, cannot open another application already has its opening." I can't find no other open programs and have tried several times to restart and power d

  When I try to open LR, I get the following message, the lightroom catalog file named "lightroom catalog 5, cannot open another application already has its opening." I can find no other open programs and have tried several times to reboot and turn off without success, any thoughts where I should look?

  Cannot open catalog in Lightroom

• 'Cannot open file because the disk is not available' Mac

  I recently changed the selection of Photoshop (CS6) Scratch disk to the boot drive by default to one of the other internal drives in my MacPro (OS 10.6.8).

  When I restart Photoshop (CS6) I get the message:

  "Cannot open file because the disk is not available"

  and Photoshop will not start.

  I then restart Photoshop with 'Control - alt - shift' keys

  (suggestion to <http://forums.adobe.com/message/3937003>)

  and reset preferences that allows Photoshop to return.

  (Reset preferences returned the boot drive to drive work status.)

  I have an another MacPro, the - same 10.6.8 OS and Adobe CS6 - and I don't have this problem of allocation of work disk.

  What happens with a MacPro which prevents me from selecting one drive other than the boot drive working Photoshop

  Probably a permission problem.  Run the Apple disk utility to repair permissions.  If this does not work the glance to the non bootable drive and check "Ignore permissions..."  Open the window Info Finder and it came inside.

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• mouse works does not, his hang.its showing me the error like this. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).

  I recently installed a graphics card for GTA 4, his work properly.bt yesterday my screen crashed it mean clear.when I started in safe mode then it is appeared correct.afterwords all of a sudden my mouse kick & stopped then I uninstalled graphic card.cause of this my connection net failed.plz help me & give me good solution.i have window xp.

  Hi DineshKaria,
  
  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.
   
  Follow the suggestion in the article given below for code 19 and check if the problem is resolved.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
  Additional reference on:
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

• HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  My DVD/RW drive stopped responding on my Acer Aspire laptop computer 4510Z I checked the Device Manager which is gives the following error message:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I solve this error so far achieved the following without success:

  -Checked for solutions using the button below the error message
  -Scanned for hardware changes
  -Used Microsoft Automated Troubleshooting Service (SMAT)
  -Created the cdfix.reg file, it has added to the registry and restarted the computer

  I would be so gratefull for any help anyone can offer.

  Darylandgoats

  Hello

  I oddly found the solution to my problem while browsing through the suggestions of SpritX at the following link: http://forums.techarena.in/vista-help/771598.htm

  Here is the solution I implemented and now my drive works perfectly:

  RESOLUTION
  Warning serious problems might occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps: 1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  Be careful it can be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
  3. in the right pane, click UpperFilters, and then click on remove.
  4. click on Yes to confirm the deletion of the UpperFilters registry entry.
  5. in the right pane, click LowerFilters, and then click on remove.
  6. click on Yes to confirm the deletion of the LowerFilters registry entry.
  7. exit the registry editor and then restart the computer.
  Note When you delete the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

  For information about how to contact computer software vendors, click the number in the following list to view the article in the Microsoft Knowledge Base:
  65416 (http://support.microsoft.com/kb/65416/) hardware and software contact information, A - K

  60781 (http://support.microsoft.com/kb/60781/) hardware and software details, L.-P.

  60782 (http://support.microsoft.com/kb/60782/) hardware and software contact information, Q - Z

  Thank you!

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title:

  Windows 7 no sound at all

  Hello

  I would like to ask help for Win 7 problem 'No audio '.

  I have a Win 7 64-bit Professional desktop PC. It has a motherboard Asus P5Q - EM.
  Previously, everything worked very well over a year, but now there is no sound at all. I see a little red x in addition to the speacer icon.

  I got a craphics card problem and it has been replaced, and shortly after, I didn't notice that no audio problem.

  First of all, I tried to fix the external audio card drivers - no help. Then I thought to use the motherboard
  audio only and removed the external audio card. I have cheked Bios that there is audio compatible motherboard.
  Windows Manager device shows Audio Realtek High Definetion. (Once I reinstalled externally
  audio card, but did not get it to work and I deleted again and focused on getting the Audio motherboard
  work.)

  Through the Device Manager, I uninstalled the device Audio from Realtek motherboard and all other audio related devices and start the PC.
  After you start Windows 7 detects audio devices well and tries to install the drivers but still said the driver installation failed.

  I also used the troubleshooter in Windows 7. According to the material and audio, I clicked on the audio playback troubleshooting. The system has tried to install the drivers, but all have failed in similar way as after rebootig.

  When I go to see the Audio the Realtek High Defenetion properties, it says:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I downloaded the latest drivers (some 54 Mb file called: 64bit_Vista_Win7_R267) Realtek www-site and run it, but no help. Same problem - no sound at all.

  If I run application system information and go to the "components" > "Problem Devices", it is said Realtek High Definition Audio, error code: failure using the VxD loader. It is also noted on the VAN Miniport (IKEv2), error code: this device does not work properly because Windows cannot load the drivers required for this device.

  I also unplug the beam of the motherboard front audio jack. I thought it may create a connector related issues, but he did not make a difference.

  If I ask the system to update the driver using Device Manager, it says that the piloted is up-to-date.

  I checked the details Realteck Sound Device in the Device Manager and it says under the number "Problem code" 13.

  Also other devices under device 'Video controls and sound game' managers do not work. I uninstalled all the. After reboot Windows 7 detects all the. Win 7 tries to install the drivers, but always fails and yellow! singing appears next to all devices.

  Under the NIC in Device Manager there is another device with the yellow! sign as well. The WAN Miniport (IKE v2). I don't know if it has something to do with this audio problem? Win 7 detects it as well after uninstalling and tries to install drivers after the start, but is also always fails.

  Now, I'm confused and I don't know if the problem is really in the Windows registry database? What is error code 13 of Realtek Audio device and what is actually the VxD loader problem?

  I'm completely lost on how to proceed with this problem.

  Can someone give advice on how to continue with this question...

  Tomppa

  I plugged the the hardware id in the Microsoft Update Catalog and the device is identified as a C-Media CMI8738/C3DX PCI Audio Device but there only Windows 2000/XP drivers available through Windows Update (you need to install the ActiveX control to view and download the drivers):

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=PCI%5CVEN_13F6%26DEV_0111%26SUBSYS_011113F6%26REV_10

  Connect the hardware id PCIDatabase provides a link to C-Media (one-third to the bottom - device ID 0 x 0111):

  http://www.PCIDatabase.com/vendor_details.php?id=376

  However there are a of the drivers mentioned in the following link that can run, and I suggest to try:

  http://www.SevenForums.com/sound-audio/9824-c-media-Freezy-my-PC.html

  The driver is the "Striker 7.1 pilot" (striker81742.zip) in the following link:

  http://www.htomega.com/downloads.html

  An in these drivers .inf file has an id of material corresponding to your device.

  I recommend the creation of a System Restore Point before trying new drivers.

• Error Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Cannot read CD/DVD

  Original title: Acer laptop DVD drive missing

  Hello

  I have an Acer Aspire 5740 G computer laptop running Windows 7. When I tried to play a movie today, it did not work. The green light on the drive of CD flashed several times then stopped and all was silent. I opened my computer and saw that the CD/DVD drive wasn't listening it. I then opened by Device Manager and the two things under CD-ROM/DVD-ROM readers had a yellow triangle and an exclamation point on them.
  One thing has been called; SVI 2ZGTAB8HQ7G5 SCSI CdRom Device
  The other thing was called; TSST Corp CDDVDW TS-L633C
  I clicked on both and saw the message; "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
  The last time I used the CD player a burn a disc over a month. I used Microsoft Fix It but it says to remove the drive and plug it in somewhere else, and I can't really do this because it's the only drive on the laptop and I'm worried I might break if I go out there with force. Can someone help me? I would really appreciate it.

  Hello

  1. what Microsoft FIXIT did you use exactly?

  2 did you a recent software or changes to the material on the computer?

  I suggest you try the steps mentioned below.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I also suggest you run the FIXIT from the link below and.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  You can run the FIXIT or you can try the manual steps and check.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 4:

  Re-install the drivers DVD

  Completely uninstall the DVD drivers from Device Manager, and then install the latest drivers for your computer.

  Open the Device Manager.

  Once the drivers are completely uninstalled, download the latest drivers from the manufacturer of the computer.

  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=1878

  Hope this helps and keep us posted.

• DVD is not accessible? Device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  The DVD (matshita dvd r) no longer under folders on the computer.

  Device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  When I try to update the driver it says I already have the best driver.

  http://www.pchell.com/hardware/cd_drive_error_code_19.shtml

  In fact, it worked for me.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Having too much CD/DVD programs can cause strange problems, especially if they load of parties
  themselves at the start because they will be competing for resources. This does not mean this problem
  has been caused by those, however, it is a possibility that and how much you
  have installed. Uninstall those that, like iTunes, Nero, and others who might be the cause of
  see if that helps.

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  If the player comes with your computer to check with the manufacturer of support system. If it isn't check
  with the support of the creation of DVD.

  =====================================================

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  ===================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot open "Download_Adobe_Photoshop_Lightroom_6_ (Mac) 2" because the identity of the sponsor cannot be confirmed.

  When I tried to run the installer of LR (Mac) to my MacBook Pro, this message appears and prevented the installation.  Is someone can you please tell me what this means?

  Cannot open "Download_Adobe_Photoshop_Lightroom_6_ (Mac) 2" because the identity of the sponsor cannot be confirmed.

  Please see below link to run the file

  OS X Mavericks: open an app from an unidentified developer