Cannot open programs after the removal of virus to the AVG Virus Vault and rebooted.

Similar Questions

• Cannot open programs after the installation of Norton

  So, my computer recently picked up a virus affecting internet Explorer. I installed a new copy of Norton Internet Security, when I realized my virus protection was rendered obsolete and the Vista firewall was not enough. The virus is now gone, unfortunately is if my ability to open ALL programs on my computer. When I try to open a program, windows asks me what program I want to use to open the program and sends me an error message. This includes verification of the admin system.

  Hello

  Your best bet may be to restore your system to a point before that you have a virus. I hope it wasn't too long.
  You will need a Vista DVD. If you do not, you can barrow one.
  Here is a nice step by step guide with pictures
  http://vistaultimate.WindowsReinstall.com/repairsystemrestore/repairsystemrestore.htm
  You lose everything was happening between now and the time before delivery, but you should go back to a point where your system works well.
  Please let us know if it works for you.

  Mark <> Microsoft Partner

• cannot open programs (music-documents-pictures-etc.) get response to explore stopped and closeses

  programs will not open response is always exploring ceased and close the window

  1. go in safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with command prompt.

  2 follow these steps in safe mode:

  Run a file system check to ensure that none of the corrupted files.
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  Optimize performance
  http://support.Microsoft.com/kb/959062

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  3. do a system restore. Choose the date, if you can, when you did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

• Cannot open encrypted after you remove files from the account which them encrypted.

  I have some encrypted files a few days back... Then I had to remove this user account and now I do not remember that I have...-encrypted files now my new account (type administrator) I can't access those files. So, how can I open these files? They are very important. I use widows xp service pack 3.

  I also tried to start windows Safe Mode, then changing the security options to allow me full control... but it still does not work
  I know that the function itself has been developed for the safety of the files, but there must be a means of decryption by another administrator account.

  Please tell me a way out as soon as possible.
  Thank you!

  I'm assuming that you encrypted these files using the available XP Pro Encrypting File System (EFS).  Unless you've backed up your encryption certificates or have a backup of the image-style where you can completely restore your system to exactly how it was, you will have great difficulty to recover these files.  Required for the use of EFS is the short article.  Particularly in the paragraph titled "why you should back up your certificates.

  "Best practices for EFS file system.
    <>http://support.Microsoft.com/kb/223316 >

  It is possible that the remains of your old user still exist on your disk.  If so, there a program designed specifically for people in your situation that may be able to retrieve the certificate.  No guarantee, however, but it might be worth trying:

  "Advanced EFS Data Recovery:
  <>http://www.ElcomSoft.com/aefsdr.html >

  HTH,
  JW

• Cannot open programs using the icons on the desktop

  Hello

  I just noticed that I can not access the internet directly by clicking on the icon. a window opens asking for me to choose the program I want to use to open IE.  He would then run the program but nothing happens and it goes in circles asking to select a program to open, run, etc.

  Soon I noticed that clicking on other applications would result in an error message saying "Application not found".  I can't remove programs from my control panel because it is inaccessible, I can't open Microsoft Office programs directly unless I go to my computer.  I can't do a system recovery or restoration; the same messages will pop up. So basically, I can't make any changes to my desktop or access directly programs.  Help, please.

  Thank you

  Steve

  Hello SteveForman,

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-XP-wont-run-exe-files/f4884285-d676-E011-8dfc-68b599b31bf5

  Best regards

  Matthew_Ha

• Cannot open programs from the internet, like Yahoo, icons on the screen or a task bar.

  Since IE8 download, programs online, such as Yahoo, won't open with a single or a double click.  I have to type prog address area address each time.  I've deleted and reinstalled affected shortcuts without success.  I understand the msg each time: "this file has no program associated with it. Create an association in the Folder Options Control Panel"but it does not work as there is no selection for this in the Control Panel folder Options, which I find in

  "Control Panel".

  -' Folder options '.

  Computerized programs, such as Word and EXEL normally open with a single click in the task bar.

  All was well with IE7.

  Your help please

  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and highlight the HtM and HtML options and click on each one in turn and follow these procedures to set the default values for Internet Explorer.  If all goes well, this will solve most, if not all, of the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot open programs after format

  Hello

  My Dell Latitude running windows 7, beat back a bit.  I used the disc of windows 7 to reinstall windows 7 Home premium 64-bit.

  Everything worked well, I enabled full windows, but currently no program but those built will be open correctly.

  I have re downloaded programs, ensuring that I have 64-bit versions. But they don't always work.

  Why is this happening?

  Thank you!

  What version of IE are you using?  Go to tools > connection to Internet Explorer to see the version

  Microsoft Security Essentials is free.  I recommend using this free online scanner to determine the malware has not invaded the system and then install the software security from this link.  Yes, you should always have installed antivirus software.

  Scan online

  http://housecall.trendmicro.com/

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  Go to start > right click on computer > select Manage

  Click on Device Manager

  You see a yellow exclamation or question marks

  If so, right click on the driver > select Properties > search error code in the lower window

  Post back pilot and error code

  You could also try running the System File Checker

  http://support.Microsoft.com/kb/929833/

  Start > type CMD > right click on CMD > select Run As Administrator

  Type sfc/scannow, and then press enter

  The scan will take a few minutes

  When you're done, open the CBS and download a copy to your OneDrive account.  Post a link to the journal.

  In the command prompt window, type the following command and press ENTER to open the CBS

  Notepad c:\windows\logs\cbs\cbs.log

• I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem? IM using Vista Home Basic 32-bit.

  It comes with Vista, upgrade install and activate Forum.

  Try in Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon. Mick Murphy - Microsoft partner

• cannot open programs by right click and run as administrator

  had a virus earlier today, I think it was the security of windows one... anyway I got rid of it with malwarebytes and restarted my computer. now, for some reason, I can't run programs without going through a right-click and run as an administrator.
  When I try to run normally (left-click) I get this window "open with."
  I'm not very good with technical terms, but I tried several fixes that have failed

  When I right click, open properties, then open the tab compatibility... "run this program as Administrator" button is grayed out so I can't do anything with that.

  turning UAC enabled or disabled dosent seem to do anything.

  Some programs are completely inaccessible, (like microsoft word)

  I also watched regedit but as didemt not a lot of sense to me at all. If anyone could break how to fix this step by step before reinstalling the DVD (which I did not), you will be my best friend

  EDIT: I followed this link of early wich looked like the same, but the link of download in the best masculine seems to not work
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-open-programs-unless-run-as-administrator/e939ba45-c6ab-499d-AB21-433e7314d344

  Hello

   

  Method 1: Disable the security software and verify afterwards; Follow the steps mentioned in the link below

  Disable the antivirus software

  If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.

  Important: Activate security software once everything is done.

  Method 2: When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you follow

• Safari throws "Safari cannot open page because the server is not responding" error for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Can anyone help?

  Safari throws "Safari cannot open page because the server is not responding" while Chrome throws an error "this site is not reachable, connection timed out" for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Sometimes, however, I am able to get the site on Google and access one page other than the home page and everything on the site works fine afterwards. I use a Macbook Pro OS X El Capitan (10.11.5) running. Can anyone help?

  Test in safe mode, if it works back to the normal mode safe mode start-up to test again.

  Try safe mode if your Mac does not end commissioning - Apple Support

  Let us know if the problem occurs in mode without failure or even once after start in normal mode.

• I tried to burn some pictures with music on a DVD using Windows DVD maker, but others cannot open or run the disc. I tried to use DVD-R and DVD + R, but nothing works. Any suggestions?

  I have created a slideshow with background music using Windows DVD maker on a DVD-R and DVD + R and others cannot open or run the disc. I can't run into a DVD player, but my computer it plays very well. Any suggestions?

  Lol it won't play in my DVD player either. Just the computer.

  =====================================
  This could be a hardware problem with your DVD writer
  but here's something you can try.

  Create your slideshow (photos and music) in the film
  Creator of... and then publish the file to a folder on your hard drive
  walk in the .wmv format.

  Windows Vista
  Getting started
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Then try to use the following free software to burn your DVD:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  Good luck.

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  John Inzer - MS - MVP - digital media experience

• I cannot open Photoshop after getting a new computer. Can you help me?

  I cannot open Photoshop after getting a new computer. Can you help me?

  Thanks for the update.

  If it is getting locked on screen 'sweep of the presets', press the ESC key to skip this part and then check out.

• Error message"the file is maybe damaged or corrupted 1610153464 / also cannot open projects in the background 26: 142

  Hi all

  I hope someone can help me.

  I use AE CC/Windows 7 on a Dell, 32 GB of RAM, 64-bit op system, processor: Intel (R) Xeon (R) CPU x 5670 @ 2.93 Ghz 2.93 Ghz (2 CPUs).

  So far I had worked on many projects with no problems and then a few weeks ago, project crashing non-stop. The problem has been resolved when I got rid of all the MP3s and diverted to RAM. Once again, it was a problem that I had not in the past and I don't remember changing anything whatsoever.

  Now, it seems that it is impossible for me to export/rendering a project in a Quick time or same AVI file. If its quick time, I get this message: unable to make failure of After Effects error one module output. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: cannot open projects in the background AE 26: 142)

  What is happening with the various projects.

  I have read the forums on hearing that the problem may be a Bug with quicktime and H.264? I never had a problem with it before, but even once when I try to export AVI I get this error message:

  Cannot open projects in the background AE

  I have a feeling that it is associated with quick time. I uninstalled and reinstalled QT, but still not the problem. It will open the old QT files without problem. I tried to download an update of the correction of a bug as a proposed post but I think I have the final reason why it did not work.

  This project has a couple of quick media files H.264. Do I need to convert? They are the cause of all this?

  I'm sorry, I really tried to seek answers in the forums before contacting you here, but I can't find a reason for all this mess, which again appeared a few weeks without any problems for months... If someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.

  QuickTime H.264 is terrible. Do not use it.

  Use the AVI file, you have created in your Adobe Media Encoder and use the parameters of H.264 there.

• aftermath of the warning: cannot open projects in the background (26: 142)

  Renders take a LONG time to start with this dialog error appearing after that is being rendered.

  aftermath of the warning: cannot open projects in the background (26: 142)

  Any idea what would cause this?

  I'm running AE 11.0.0.378 on a Mac Pro 12 - core with 24 GB of RAM and a Radeon 5870 card.

  First of all, make sure that you installed the updates. Since the version number you posted, you have not installed the corrections was last updated.

  http://Adobe.LY/lsrkmJ

• Cannot open or create the file... Permission denied

  I am a new user of LC Designer ES.  After creating and saving a form, I made changes and now cannot save.  Error message in the log report palette tab says "PDF generated successfully.  Cannot open or create the file [file name] permission denied. "No idea why this would happen and how to fix it?

  Thanks for any help.

  If the file is already opened in another application (such as Acrobat or Reader) then you wodul not being able to save as these apps put a lock on the form.

  Paul