Portege R100 - the upgrade the hard drive in the SDS?

Similar Questions

• XP is no longer valid after the upgrade of hard drive.

  Help me please

  I upgraded my hard drive and uploaded my old xp but it tells me this isn't a valid xp, what hurts

  What is the EXACT error you get and when message?

  How did did you transfer the old "xp"?

  If you managed to install it, but are unable to activate, try to use telephone activation - do not meet the request of ansafone for the service that you need, and you should be transferred to a live operator who can help.

• Upgrade my hard drive of 1 TB to 3 TB HOW >?

  Hello I am trying to upgrade my internal internal 1 TB to 3 TB drive.

  What is the best way to do it. Can I just clone my 1 TB using Macrium or Acronis drive and then just take the old internal and

  Place the new cloned internally in the Bay?  Then start right up? The largest clone disk will work on Windows 7 just like the old drive?

  It's just like the change of a smaller size for a larger right shoe?

  Hello

  Thank you for visiting Microsoft Community.

  According to the description of the problem, you are ready to upgrade your hard drive of 1 TB of hard drive 3 TB. This type of problem is better handled by your computer manufacturer. That they are the best people who can guide you how to make these internal upgrade.

  Before upgrading your hard drive, I suggest you to return the items listed below for more information about the limit of the hard drive that is supported by the OS.

  Windows supports hard drives larger than 2 TB

  Understand the limit of 2 TB of storage Windows

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  Never mind.  I found the license key for the previous product and was able to complete the installation.  Being a "pack rat" has its merits, sometimes.

• I want to upgrade my hard drive and memory on my cq 5047 uk what are the possibilities

  I have a compaq CQ5047UK and that you want to upgrade to a faster hard drive and a faster memory that I have 1.01 benicia Board with a wdc wd3200aajs with 4 GB of ram ddr2 800 mhz under windows 7 ultimate are all their possible ways to improve the elements above to sata 2 or 3 and ram faster with what I have without having to buy a new computer

  Hello

  RAM: Based on this you can upgrade more memory live (max 8 GB) but it only support something like this:

  

• E Series MODEL VPCEG26EG the upgrade of hard drives

  Hi all

  I always try to upgdare my laptop hard drive so dying.
  And my question is whether I can use the latest SSD drives regardless of size.
  If so, I need to the belvedere for something in particular? For example: Type Sata 3 or 2

  Thanks in advance.

  Thanks for the quick response.
  Very grateful for the help.

  I guess that im really getting an SSD just for the concert only.
  Is startup time, the only thing that an SSD can increase? Or is it generally faster compared to SATA HDD...

• Satellite L300-110 and the upgrade of HARD drive

  I have Satellite L300-110 with 4 GB of RAM, and I want to improve its HARD drive of 160 GB SATA HARD drive for SATA 500 GB HARD drive.
  I just know is valid, and if not is 320 GB SATA HDD are valid?

  Appreciate your response.

  Yes, you can upgrade HARD drive on your Satellite with 500 GB SATA hard drive.

• Portege won't go in HARD drive recovery

  Hello
  I have a laptop Portege that I want to get back to the default settings after news of windows 7 has been installed on the system. I did it in the past of the system while now the key 0 down however now I see when I do it is the label of "HARD Drive Recovery Mode" down left and then the operating system loads normally.

  No idea what is the problem here? How can I force the recovery process?
  (I don't see the recovery partition in Windows.)
  Thank you
  Erez.

  Hello

  HARD drive recovery option is available when the laptop to factory settings.
  >... after a new of windows 7 has been installed on the system.
  If you have installed your own Windows version HARD drive recovery option is no longer available.
  In this case, you can install original recovery image using recovery media (DVD).
  You have created the media according to the instructions described in the user s manuals document?

• Portege R700-1hd: Questions about HARD drive replacement and passwords

  I have a 1hd R700 with 320 GB HARD drive in stock. I want to upgrade it to 500 GB. This update should be pretty simple, cloning from the old to the new.

  However, I was wondering about the HARD drive password / finger.
  My HARD drive it configured to use a fingerprint/password on boot - I guess that it is involved in the BIOS and the drive itself, but I'm not exactly sure how.
  I think the HARD drive itself is locked, it is not a Windows or BIOS password.

  If I change the HARD drive will still be able to use startup disk HARD password/fingerprint? Are there requirements for material of HARD drive I need to consider before buying new HARD drive? As should be a specific type of HARD drive to work with password disk HARD/fingerprint digital?

  Thank you

  Hi bullerd,

  The HARD drive password is stored on the HARD drive so when you replace the HARD drive you must set a new password of HDD in BIOS. The password is not stored in the BIOS. In addition fingerprints can also be stored on the HARD drive or let s say fingerprint digital software but all of the operating system must be installed after Exchange HARD drive so it s new problem.

  So the two passwords you mentioned are stored on the HARD drive so it s no problem to swap the HARD drive. :)

• Portege M300 fails to recognize HARD drive

  Last week, I replaced the hard drive on my laptop Toshiba Portege M300 to a larger drive. It worked very well for a coupe of days, but when I tried to plug in the hard drive of origin back in (to copy data on a network share, which I forgot to transfer to the new hard drive) he does not see the drive. I tried to set the new drive and he can't see it either.

  I tested the original and new hard drive on a different laptop and they work so I can't guess the willing Portege of a faulty ide controller or the ide cable. No matter which hard drive, I am attaching the trys to laptop to boot from the CD-ROM, ignores the hard drive and the NIC PXE trys. The bios indicates also theres no hard disk attached too.

  First of all, if the CD-ROM drive still work am I right in thinking the ide controller is still work?

  Secondly could someone suggest where I can buy an ide for a M300 cable because it is a ribbion printed circuit board which I have never seen elsewhere. I guess this is part of Toshiba custom?

  Hello

  I believe also that it is Toshiba custom component and it will be much better in the service partner contact in your country. AFAIK this Portege is very nice and expensive unit and you should not do it alone. If you have a hardware problem allow technicians to do it for you. Small mistake and you can just have big problem.

  Are you sure that you did not damage something?

  If you need addresses please check http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Portege 3500: Need a new HARD drive

  Hello

  I bought a Portege 3500 and after a few weeks of use, the hard disk or fan (safe) started to make loud noises and now every time I turn on the laptop screens toshiba rises and it happens eventually to a screen I wrote what he said below.

  I read somewhere that this means that my hard drive is over and I have to buy a new hard drive.
  Is this true and if so anyone know where I can get a drive hard because the laptop is old?

  The only one I've seen that is in stock is of about £230 and it's about the same price, I bought the laptop.
  Or is there a solution ive tried going on in all modes but it just restarts and Ive also tried to reinstall the OS using the cd but I can't in the menu option to reinstall XP.

  "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.

  If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows normally.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration known (your most recent settings that worked)
  Start Windows normally

  Use top and down arrow keys to move the selection of your choice.

  Seconds until Windows starts: 30 "

  Hello

  AFAIK Portege 3500 was equipped with the 40 GB IDE HDD.
  This is why you must use an IDE hard drives (not SATA).

  Now, it would be important to know what max HD size could be compatible;
  If the laptop supports 40 GB I think a 60 GB HARD drive might work too.

  I think that you should just google for some 40 GB, 60 GB hard drives, that supports the IDE!

  Best regards

• Portege 3440CT: how to format HARD drive

  Hi all

  After suffering a little frustration, I decided to use the wealth of knowledge and experience which is available on the support forum.

  I have a Portege 3440CT which has been delivered to my friend a few years ago, by a company she worked at the time. When the company replaced the laptop, we were allowed to keep the old, we use very occasionally. Unfortunately, the laptop has recently experienced a failure total and irrecoverable from the original hard drive, which was not a huge setback because there was no essential data there.

  In any case, I have from a compatible spare hard drive - a Hitachi 30 GB ATA-5 / IDE 2.5 "9.5 mm 4200 RPM, Pt not ' DK23CA-30F - and mounted, but as the hard disk is not formatted the laptop does not see it is there. As I said earlier, the laptop was provided by the employer, so we are not in possession of any recovery disks Toshiba or Windows that may have been provided, the laptop was originally running Windows 98 Second edition, and the sticker detailing the product key is always on the underside.

  I approached one of the suppliers of services of Toshiba for help and they directed me to Toshiba.
  Toshiba says that the laptop is no longer supported so they directed me to a service provider, I went around in circles.

  My question is, if I bought a copy of Windows 98 SE, or Windows XP and installed on the external floppy drive, which would also include a facility to format the hard drive? I think that in Windows 98 Second edition, there was a function of FDISK. I was able to access the pages of the BIOS after looking through advice given here, I can change the order of boot with no problems

  What I request, essentially, is that now, I have installed a new hard drive, what do I do next?

  > My question is, if I bought a copy of Windows 98 SE, or Windows XP and installed on the external floppy drive, which would also include a facility to format the hard drive?

  Yes, definitely Yes! The installation of Win98or of other versions of Windows like W2K or XP provides an option to format the HARD drive before installing the operating system.
  Simply boot from the bootable CD to get this feature.

• Portege R500 - possibility to Exchange HARD drive?

  Hi@all,
  is it possible to change a Portege R500 HARD drive or is this something special? And the size that need me?

  Hello

  I found the info Portege R500 comes with Toshiba (MK1237GSX) HARD drive.
  Google says it's 2.5 SATA HDD.

• Portege R100: RAM upgrade

  I have a Toshiba Portege R100 (1 GHz, 512 MB RAM)

  RAM modules of 256 MB is still, the other is removable (so I was told).

  I think the move to Vista and so to upgrade my RAM.

  Will be all DDR SODIMM PC2100 266 Mhz module works, or are there specific brands / specifications should I use?

  Normally paired RAM is used for optimal performance, but I saw with unmatched sold Dells of RAM (1 GB and 2 GB for example). What are the disadvantages (if any) to use a module of 1 GB or 512 GB with the fixed 256 MB module?

  PC2100 is now more expensive than backward compatible PC2700. A module of 1 GB of RAM of PC2700 compatible (PC2100) to the rear will work with the 256 MB PC2100 fixed?

  Richard

  You can install a universal DDR1 Sodimm PC2100 * or * module PC2700

  He will work with the memory of base without problem, but of course, the PC2700 will be 'downgraded' to PC2100.

• Portege S100 Ultra Slim Bay HARD drive adapter take 2.5 HDD?

  As the title says really, think to add a second hard drive to my portege s100, but not sure if the Ultra Slim Bay adapter HARD disk can take normal 2.5 "HDD, or just the special Ultra Slim Bay HARD drive.
  Thank you
  Danh

  Hello

  First of all, you need to use the HARD drive adapter selectable right Bay which is compatible with the Portege S100.

  I found an and it seems that the HARD drive adapter Bay selectable PA3408U-1ETC is the right!
  Case Interface is serial ATA (SATA). And the Serial - ATA 80GB HDD Kit PA3407U - 1 H 80 must be compatible with the select Bay case

  Maybe you will take a peek here:
  Portege S100 details Options & accessories