Cannot open some files

Similar Questions

• Cannot open some files and programs

  I have windows 7, some of my files and programs will be open (ie. Recycle Bin, computer, libraries). They are sent to the windows Explorer file in the task bar. I can see what is in the file when I put the cursor over them, but cannot open them. I can close the files once in windows Explorer and when I reduce they seem to come on the screen.  It was not always thus and I don't know how to fix this or why it's happening.

  Thank you.

  Hello

  It may be an idea to run the Windows system restore.  If you have Norton Internet Security installed, you should disable Norton Tamper Protection as described in step 2, on the link below.

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web & docURL = 20091112171719EN & LN = en_US

  Once you are done, turn off the PC.  Windows system restore is usaully better run in Mode without failure.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  When it has loaded, on the Start Menu, click principally made programs, accessories, click System Tools and run the system restore.  Choose a restore point at least 3 days prior (or a previous version if available) the problem and then proceed to the restoration.  When you are finished, Windows will restart normally.

  Kind regards

  DP - K

  

• Cannot open some files in Windows Vista.

  Original title: access to the owner/administrator files.

  I am the owner / administrator but do not have access to some files. In my case, it's the user/local data and many others. Why not?

  Hello

  1 did you change on your computer before this problem?

  2. what happens when you access files?

  3. you receive an error message?

  Follow the suggestions and see if it helps.

  Method 1

  Run the fix of the article.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2

  See the article and then check.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• cannot open some files, get a runtime error. No matter what?

  When I try to access some files on the internet I get a runtime error and the site is stopped

  Hello

  Try this link: http://support.microsoft.com/kb/822521

  If this doesn't work, try updating your version of .NET Framework.
  Link: http://www.microsoft.com/en-us/download/details.aspx?id=17851

  Good luck
  _________________
  M3HR
  http://m3hr.TK
  E-mail address is removed from the privacy *.

• Cannot open some files that I was sent

  I have specific emails that I can not open with Adobe or Windows.  An online search indicates they are .doc files, but can't find what
  I need to open.

  Hey, Toyota

  . DOC files to open with Microsoft Word. You can download a trial version for 60 days for free.

  http://US1.trymicrosoftoffice.com/default.aspx

  I hope this helps! Mark <> Microsoft Partner

• Cannot open some files CR2 CS5.

  Problems updating plugins RAW in CS5. What are the latest versions for CS5 and bridge? I have no problem to display my images from Canon Rebel and Canon 5DM 3; However, my friend got sent files taken with its 6 d and I am unable to view them.

  This list indicates what version of Camera RAW every camera needs

  Camera Raw plugin | Supported devices

  If you open Photoshop CS5 and go help > plugins > Camera RAW which will show you your version.

  If your device requires a newer version of ACR, then you would use the program free DNG conversion linked to the same page above.

• 'ACCESS DENIED' family xp cannot open some files on xp pro.

  I install a home network between 2 computers, XP Pro and XP Home. The printer (connected to XP Pro) and the initial shared folders in C:\Document and settings\All Users\Shared Documents work, allowing access to both machines. The problem is; When I try to share a folder on drive D: or E: on the XP Pro folder machine can be seen on the XP Home machine but receives the dreaded permission "access denied" error message The same file & content is visible on XP Home, when you drag to the XP Pro 'folder shared documents' on the c: drive. Going the other way from XP Pro XP home, everything works fine.

  I check all the problem areas standard, firewall, user accounts and passwords, group name, etc.

  I discovered what the problem is. This is the "WINDOWS CRITICAL UPDATE. I created a new installation for xp pro and xp home system loading only Service pack 3 and Internet explorer 7. Everything works perfectly now as it should. I guess I'll have to load the 80 more critical updates one at a time to find out which screw up because the explanations on the updates are generic bs and don't really say what OS networking functionality they reverberate. Thank you once again Microsoft to keeping in the dark.

  I had a revelation. I realized that the purpose of the security updates has been to protect the enterprise against internal threats (insert 'employees' here) customers so that requested a decated COMPUTER sharing files and networking to work once the updates have been loaded.

• Cannot open some files without the permission of the administrator. I am the administrator how I give permission?

  As the title

  If you logged in with an administrator-level account, you should be able to right click on a hit file, go to properties and tab and then security.  From there, you can change security and take possession of the file.  Once you have property, you can adjust the security settings to give you total control.

• Cannot open some CHM files in Windows 7 64 bit

  Hello

  I run Windows 7 64 bit with SP1 and sometimes I can't open CHM files.
  I get the error message: could not open the file: mk:@MSITStore:.

  I've tried several things as when you rename the file, move it to another folder, modify the security permissions and some described in the thread following http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/cannot-open-help-files-chm/096e6a97-d223-4896-b537-6bc1dafe6960 but nothing helped.

  I will be grateful if someone could help resolve this weird question!

  Thank you!

  See if the answer in the support thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-files/cant-read-chm-files/3fb4b537-cfa6-437c-a66c-67fa91349631

• IAM cannot open PNG file in adobe PS CC 2014 and when I try to open the PNG file, message: could not complete your request because it is not just some kind of document

  IAM cannot open PNG file in adobe PS CC 2014 and when I try to open the PNG file, message: could not complete your request because it is not just some kind of document

  try to make a copy of the file and change the suffix for .jpg and see if it opens then.

• Cannot open PDF files on Web sites, or when it is attached to the email!

  Hello
  My computer is running Vista and I had this problem for the last 2 years! I can only receive the PDF sent by one of the companies I work for. I can't open most PDF files sent by attachment or all the files on Web sites. I have Adobe 9 and Foxit Reader and it does not work with either. I tried to re - install Adobe and still no luck. With Foxit Reader that I can manage to open the PDF files sent from the company I mentioned earlier, but that's all. I would really appreciate some help... Thank you very much! :) x

  Try this: uninstall all the software that you have to display the PDF documents. Then try to open a PDF file. You should receive a message that "Windows cannot open this file". If you get the message that the file is "corrupt" or "not supported" means that you have another program or display of PDF files.
  Once you receive a message that "Windows cannot open this file" download and install the latest version of Adobe Reader (9.3).

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "windows cannot open the file must know what program - program list selection" when tried to open the file

  After a problem with my sony ebook reader, I was told by the library to remove the program Sony and library of books on the computer and the drive, and then reinstall the program.  I would then be able to download the books again.  But now I have a message saying that windows cannot open the file must know what program - select the program from the list. When I click on the program sony player list is not there.  What I am doing wrong?  You can give me some advice.

   
  Original title: Pauline1949

  Hello

  1. have you downloaded the right file to library?

  2. What is the file format of the file that you downloaded?

  3. What are the recommendations of programs that provided by Windows?

  4. have you installed the player from the computer program?

  5 is this problem confined to a particular file that downloaded?

   
  The file that you downloaded requires an appropriate program to open it in Windows. That's why I suggest to check again if you have installed the reader program and also check if you have downloaded the appropriate Center books.
   
  Reference:
  
   
  Reader store
  http://eBookStore.Sony.com/
  Player for PC
  http://eBookStore.Sony.com/download/
   
  If you have installed the right program and download the correct file in the program. I suggest you to change the player to default programs in Windows.
  Reference:
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
   
  I hope this helps.

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows