Cannot open the link in a peer-to-peer network

I created a peer-to-peer network between two equipped PDA to Windows Mobile 5.0. It is shown that two of them were connected, and their IP addresses are assigned automatically.

But when I used the function of TCP/IP Open, it returns an error 10060 "cannot open connection". I miss something here? It should be a simple connection.

The IP address 169.254.x.x, this is what is called a "auto assigned IP.  Which means that the device is set to get an IP from a DHCP server, but when he cannot find a DHCP server, it takes an IP address.  This allows to have an address on the computer network, but likely to be on the same subnet are not likely.  Also, the 169.254.x.x will change each time the computer restarts, or the NIC decides to try to obtain an IP address again.  It is never a good idea to use an IP address auto assigned in the communication of data, because these problems undelining.  If you do not connect to a DHCP server, it is always better to set a static IP address.

Tags: NI Software

Similar Questions

  • Cannot open the link to the external site pdf to Word 7

    I created a link to a pdf file in a Word 7 document.  The pdf is located on an external website. I get the following message appears when you try to follow this link - Ctrl + click.  I use Windows XP SP3.  The pdf file can be opened in IE and Ff.

    Error message: cannot open . Cannot open the specified file.

    Any ideas gratefully received.  trisht

    Trisht Hello,

    Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to the word and would be better suited to the community of Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
    Discussion Questions General Group

    Steven
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Cannot open the link to the forum which should fix the bug of replace text

    Could not open the link to the forum (e http://feedback.photoshop.com/photoshop_family/topics/text_corruption_in_photoshop_cs6_fil) should fix the "bug replace text':

    http://helpx.stage.Adobe.com/Photoshop/KB/text-replaced-text-different-layer.html

    Anywhere else where I can download thich tech doc?

    Thanks in advance

    Hello

    Try this link:

    http://helpx.Adobe.com/Photoshop/KB/text-replaced-text-different-layer.html

    One displayed should be updated.

    Kind regards

    Steve

  • Cannot open the link to the catalogue EPUBreader (chrome: / / URL)

    I have FF 16.0.2 and expansion EPUBreader installed and it works fine. When I click on a local .epub file, it opens in the browser.
    Also have a local webserver (http://localhost) and a homepage with all my links the and external.
    I would like to add a link to the Epub catalog like this:
    < a href = "chrome://epubreader/content/catalog.xul" target = _blank > < /a > BOOKS
    The problem is that FF does not show anything, when the link is clicked. How should I do?

    That an extension can open a URL chrome via this link on a web page.

    You can see in the ' tools > error Console "a security error.

    You can use a bookmark to the location defined in the URL chrome instead, if you want to open the catalog.xul page.

  • iOS 9.3 cannot open the links more on safari, mail, and other messengers

    My Safari on iOS 9.2.1 (update: and now 9.3) will not open most of the links more, i.e. by typing on a link on a page does nothing. Worse, other applications like Messages, Chrome are problems when they try to open URL links.

    The common question is breaks when you tapoterez links and even Mobile Safari press and hold (to get the app open a link in a new tab), the device will freeze and eventually crashes.

    Unfortunately, this is a common problem.

    Try turning off JavaScript under settings - Safari - Advanced.

    You can find more information at the link:

    For those having issues with the iOS 9.3 update please read...

    New construction of iOS with the latest bugfixes 9.3 is now available for download [MAJ]

  • Cannot open the link in Outlook Express 6.0

    Cannot open links in Outlook Express 6.0. Unable to print as well.

    "Susan Donnelly" is your alter ego?
    http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/c42fde4c-3F24-4703-BEFC-bbd12b41d312 Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • After the reinstallation of 9 cannot open the links included in my e-mails.

    I contact your support staff of Microsoft, but since I can not open the thread, I can't keep going.

    I had trouble with IE9 for about 16-18 months. Geek Squad has spent months trying to figure what was wrong with my computer, and they said many of their clients have the same problem. I was told to choose either Google or Firefox. I use Firefox for a few months, but I find that it is unstable.

    My brother came home and rebuilt my computer. I have a new hard drive, video card, my processor Intel 7 handles documents and a new 250 Samsung SSD manages operating system, more he doubled the memory. I've been complaining about the Firefox, so he suggested since I was practically a set of new systems, reinstall IE9 I've done. Now, the problem is opening links in e-mail messages.

    The error I get, it's something like 'operation cancelled due to new restrictions see your administrator'

    I have no idea what has been changed. I am the administrator of my computer, but that did not help.

    You don't mention what program you use for mail. By chance, it would be MS Outlook?

    You receive an error message when you click a hyperlink in Outlook
    http://support.Microsoft.com/kb/310049

    This operation has been cancelled due to restrictions in
    http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions

    Microsoft Office Outlook Forums can be found here
    http://answers.Microsoft.com/en-us/Office/Forum/Outlook?tab=all

  • Windows 7 (64 bit) cannot open the links in a Web site

    I found the answer to this and I tried the solution, but maybe I am doing something wrong because it does not work for me.   I have Win 7 64 bit OS.  Internet Explorer is broken to 32-bit.  I tried to do IE (64-bit), the default value, but it wouldn't let me.    So I go to a website and if there is a link there I can't open it.  I have to right click then copy the shortcut and then paste and enter.     Is there another solution?   Is there a way to make 64-bit by default or should I just use firefox?   Thank you

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot open the link in the web page to open Outlook e-mail. Says my browser is too old and directs me to get IE8

    I am running Windows XP Professional Version 2002, Service Pack 3.  The Add/Remove programs in Control Panel shows 20090308.140743 Version IE8, 3.67 MB, but it presents the program "rarely used".  (Of course, I use my browser frequently).  Can you help me?  Thank you

    Hello

    • You use Outlook or Outlook Express?

    You can check this link, if you are using Outlook Express:

    Outlook Express
     
    If this occurs only with Outlook, post your request in the below location to improve assistance:
  • Trying to open the link in windows live mail 2011 but open will link meassage "problem sending a command to the program" not windows live mail

    AT THE OPENING OF WINDOWS LIVE MAIL CANNOT OPEN LINKS IN EMAILS RECEIVED GERTTING MESSAGE "PROBLEM SENDING COMMAND TO PROGRAM." LINKS INCLUDE YOUTUBE VIDEOS, LINKS ON CD FROM EMAILS TO FRIENDS. CANNOT OPEN THE LINKS OF WINDOWS LIVE ESSENTIALS 2011

    Click Start, select default programs
    Click settings by default access and computer program Set
    Click Custom, and then select your web browser (IE)?
    Click OK

    Then, follow these steps:

    Click set your default programs
    Select your browser from the list
    Click set this program as default
    Click OK

  • Cannot open the safari link after installing the iOS 9.3

    Cannot open the safari link after installing the iOS 9.3

    This is a common problem and there is currently no permanent solution yet.

    Try turning off JavaScript under settings - Safari - Advanced.

    I think that apple will figure things out soon.

  • When I long press on a link, in addition to opening a box of context, it also opens the link in this window. How can I get JUST the context window appears?

    I'm an avid user of pocket and I like to scroll through the different blog sites and save articles to read later. In general, I have been using Google Chrome browser that forces me to open each section in a different tab and then share this article to the Pocket to save him. I was delighted when I found the firefox browser has worked very well and even supported Add ons. I decided to try it, but have encountered a major problem. When I press a link to share, instead of a context window appear and the site remains the same, a context window opens while the site loads the link. When I right click on a link in my browser, it does not mean I want to go to this link, so I do not know why the same procedure would cause the mobile browser to do so. Is there a way I can press a link without having to open the link in this tab?

    Well, it's silly, but it's the best I could come up with:

    I tested this on Gizmodo: when the menu press and hold appears, instead of lifting the finger pointing upwards, slide it downwards a little, right next to the link, before you lift your finger on the glass. Then the script on the page detects a "mouse up" (or equivalent event) on the link. It works for you?

    I know that you cannot see the link in the menu, but one or two lines of text height will usually do.

    Would probably be wise for Firefox cancel all events associated with touching the link once the menu is displayed. Or to make sure that the site includes as a right-click (that seems more difficult). I have not checked to see if ideas along these lines have been filed in the bug tracking system.

    Edit: Tested on a Nexus 5 (LG).

  • Cannot open the terminal failures of the file 'C\:HP\DATA\HP. DAT' to read.

    I've just updated my bios on my HP Pavilion g6-2102au Notebook PC.

    I had continuous multi color screens, thought it was overheating but not so much.

    I installed the latest version of the bios and it seems to have worked? having had a twinkle while writing

    This.

    My query is to start up when he started I get this message and I said OK

    Terminal Failute cannot open the file 'C\:HP\DATA\HPLB. DAT' to read.

    This is the message that someone help me get rid of it

    See you soon

    shiner2348

    Hi @shiner2348,

    Thank you for your inquiry.

    I understand that you receive the error message "Terminal failure cannot open the file"C\:HP\DATA\HPLB. " DAT' to read '.

    This is a reference to the launch of HP software box.    I suggest to uninstall and then restart your laptop.

    If you want to keep this app I suggest that you try to download it and install it using compatibility mode.

    Here are links to help you in this process:

    Compatibility mode

    HP launch box Windows 8

    Please let me know the results.


    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

    To show recognition for my efforts please click the Thumbs Up below.

  • Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

    I'm trying to reinstall windows vista for the following reasons:

    1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
    2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
    3. I need to clean my laptop.

    When I try to start the installation of a disk and I put in my product key, I get the following error:

    Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

    Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

    Rob

    Hi Rob,

    I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

    Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

    Resistance is futile

    If you don't succeed the first time skydiving probably isn't for you!

  • Try to install the new copy off error vista WINDOWS CANNOT OPEN THE REQUIRED FILE 0x8007000D

    OT: Hey tried down laptop restore none tried to install the new copy off vista prem with no joy only error 0x8007000D WINDOWS can NOT OPEN THE REQUIRED of joy

    Portable Hi down tried restore none tried to install the new copy off vista prem with no joy only error 0x8007000D comes WINDOWS CANNOT OPEN THE REQUIRED FILE of joy

    Hi jamesgillwn,

    1. when exactly you get this error message?
    2. what disc do you use to reinstall?
    3. What is the exact error that appears when you try to start?
    4. at what point of the installation you get the error message?

    After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

    First check if you have scratches or dust on the disc and clean the surface and try again.

    To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

    Try the steps from the following link:

    Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

    http://support.Microsoft.com/kb/930984

    Note: When you perform the installation, you will lose the data, make sure that you need to backup your data before you perform the installation.

Maybe you are looking for

  • Warranty runs out in 2 days. Can I get an extension?

    I have a Satellite L300-1AS, that I bought on December 28, 2008, I have a standard 1 year international warranty on which runs out in 2 days.I want to buy an extension for it, but first I'm not sure which warranty service is good for my model.My seri

  • Message: Sell another Application is controlling the wireless adapter

    Does anyone know how to move from one devices (using Configfree) to another wireless? A window opens and reads 'request to sell another control the wireless adapter. How do I changed the setting so I can connect to the device that is controlled? Than

  • Serious error on the A30 in doing a spyware scan

    Just reinstalled my OS on my laptop, Windows XP Home Edition. Downloaded a scanner free spyware and scanned my laptop (EWIDO anti-spyware). Scan went well until he to the driver file i386 etc. The scanner stopped and the laptop started making a horri

  • ZOOM

    My computer HP laptop change the zoom every time I move my cursor how can I keep this from happenning

  • Why my event structure reacts to an event of "change value"?

    Hello I created a VI with 2 while loops and structure 1 integrated event. The first while loop creates a square wave and the value of the pass signal periodically - this event is registered by a property node and also shown on an indicator. I've link