Cannot open the realtek hd Manager in windows7

Similar Questions

• Cannot open the initial window of Firefox. (windows7 update)

  When I run Firefox, the hourglass shows seconds, then disappears.
  No window is open. This occurs after an automated update to my
  Windows overnight Tuesday, dec 9. Internet Explorer is obviously OK.
  All other programs OK.

  Have tried - without change:

   restart computer;
   reinitialize modem and wifi home set;
   install new firefox (using "stub" 35.0.5);
   hold shift key down during launch;
   Windows "troubleshoot compatibility" reports "An error occurred while
     troubleshooting".
  

  After any attempt to start the Task Manager shows there is at least one
  Firefox.exe * 32 process (tab), but no related Application (tab).
  Dialog box 'automatically add' could not open this file...

  Please use malwarebytes as well - in my experiences, it gives the best results (just leave the ability to run a try for the unchecked pro version)...

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• El Capitan: Cannot open the application "app name" because it may be damaged or incomplete

  Came across this several times. After you initially upgrade to El Capitan 10.11.2, after logging into my main account (admin), I was not able to open applications and received the following error:

  "Cannot open the application name"app"because it may be damaged or incomplete."

  I couldn't open "Activity Monitor", "System Preferences", "Finder" or anything (provided, App Store or other system). The icons will revert to the default application icon. Other users have no problem with the same apps.

  After the panic, I found a solution: go to another admin account, delete the old user account, and then add it again. This version corrects the problem of this user; It apparently rebuilt the user for that user identity information, while leaving their home folder (and preferences, documents, key rings, etc.) only. iCloud information must be re-entered, but it is trivial. Once the user delete and add, I was able to run these applications.

  When I upgraded to 10.11.3, it is the same thing, but to 3 accounts. I managed to solve this problem through the guest account - that is, I was still able to authenticate as an administrator, but I could not open a session and run anything.

  El Capitan removed permissions repair; I think it can be done in the recovery console, but I shouldn't do that.

  No idea why this continues to be?

  Generally to searching for the above error message is specific to applications from the App Store or other, not about things like "Activity Monitor" and "System Preferences."

  You now have this problem?

• IdeaPad Y450 - message 'cannot open the camera.

  I recently bought a Lenovo IdeaPad Y450. There is a problem with the camera. I use the Windows 7 32-bit operating system.

  I installed the drivers and the Lenovo easy Capture software.

  When I check the Device Manager on my computer, the camera is listed under imaging devices and it indicates that the device is functioning properly.

  Other USB devices on my computer work correctly.

  When I open the Lenovo easy Capture software, I get the following message: "cannot open the camera.

  I tried to uninstall everything and do a fresh install, but nothing seems not to solve this problem.

  Do you have any suggestions?

  
  

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• Cannot open my encrypted Documents? -Cannot open the document: user does not have access privileges

  I am using Window7 and I got some of my encrypted files by opening the properties of the file and selecting the encryption option. I have not had any problems so far, but all of a sudden I can't open my encrypted files. There is an error message indicating "cannot open the document: user does not have access privileges. But I have no other user account on my computer and I am logged in with my administrator profile. I turned off my computer, rebooted and tried various methods, but when I open the file it shows the same message as above. Help, please?

  Hello

  Please follow the steps from the link below.

  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

  Also check out the links below.

  Encrypt or decrypt a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  Recover encrypted files or folders

  http://Windows.Microsoft.com/en-us/Windows7/recover-encrypted-files-or-folders

  Import or export certificates and private keys

  http://Windows.Microsoft.com/en-us/Windows7/import-or-export-certificates-and-private-keys

• Seagate installs but I can not find and cannot open the unit to see my files

  whenever I installed my seagate freeagent go drive.. initio default controller is the one that pops up saying ready for use, but I can not find and cannot open the unit to see my files, I can see it as (which I think it's maybe) in devices, printers as 'Initro Default Controller.

  The disc may need a drive letter must be attributed. Please try the following link to assign a drive letter to the drive.

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

• WMP opens Itunes M4A but cannot open the WMA to M4A

  ITunes MPEG-4 audio stores on my PC as a file accessible M4A both WMP and Itunes, as well in Windows 7 and Windows 8.

  However, without Itunes installed and the use of usual online converters, Windows cannot open the converted M4A WMA files.

  My first step might be to find a new converter that distinguishes between MPEG-4 and MPEG - 4 Audio video.
  But I'm not sure about this. Advice would be appreciated.

  Is there anywhere, yu Imran?

  Hi Mark,

  I see that you are unable to open the M4A files in Windows Media Player. I'll help you with this problem.

  Windows Media Player cannot play the file (or can't play either the audio or video of the M4A file part) because the required codec is not installed on the computer.

  For more information about codecs, click here: http://windows.microsoft.com/en-us/windows7/Codecs-frequently-asked-questions

  Refer.

  Windows Media Player, frequently asked questions: http://windows.microsoft.com/en-PH/windows7/Windows-Media-Player-frequently-asked-questions

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• "windows cannot open the file must know what program - program list selection" when tried to open the file

  After a problem with my sony ebook reader, I was told by the library to remove the program Sony and library of books on the computer and the drive, and then reinstall the program.  I would then be able to download the books again.  But now I have a message saying that windows cannot open the file must know what program - select the program from the list. When I click on the program sony player list is not there.  What I am doing wrong?  You can give me some advice.

   
  Original title: Pauline1949

  Hello

  1. have you downloaded the right file to library?

  2. What is the file format of the file that you downloaded?

  3. What are the recommendations of programs that provided by Windows?

  4. have you installed the player from the computer program?

  5 is this problem confined to a particular file that downloaded?

   
  The file that you downloaded requires an appropriate program to open it in Windows. That's why I suggest to check again if you have installed the reader program and also check if you have downloaded the appropriate Center books.
   
  Reference:
  
   
  Reader store
  http://eBookStore.Sony.com/
  Player for PC
  http://eBookStore.Sony.com/download/
   
  If you have installed the right program and download the correct file in the program. I suggest you to change the player to default programs in Windows.
  Reference:
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
   
  I hope this helps.

• I can't open the option to manage the backup of my system space.

  Hi, I created Back up system in my D drive. Now, I need to remove back old files, but cannot open the option management space. It does not. How can I delete my old backup files, pls reply back soon.

  original title: Back Up System

  Hello

  Create a new user account and check if the problem persists, if the problem does not persist in the new user account, then you can fix the damaged user account.

  Create a user account

  Difficulty of a corrupted user profile

  Hope this information helps.

• Cannot open the illustration. The illustration contains an illegal operand.

  Hi guys

  Need help here, I was working on my case when all of a sudden, it crashed on me. When I tried to open it again, I got this error:

  Cannot open the illustration. The illustration contains an illegal operand. Vertical arrow (car)

  (Grid)

  (LED \(4 numbers\ screen))

  (LED \(2 numbers\ screen))

  (Horizontal arrow)

  (Vertical arrow)

  From "... vertical arrow" go seem the names I gave my instances of the file (maybe wrong here?)

  
  I tried to read a lot of help articles, including, How to recover an Illustrator file (HAVE). DesignPoint, but do not seem to solve my problem.

  Most of these items asked me to open Adobe Illustrator preferences and /enableContentRecovery the value 1. However, I've just updated my CS6 version 16.0.4 recently, and the /enableContentRecovery does not exist in the file.

  If there is someone who knows how to do on this subject, I will be eternally grateful!

  Thank you!

  Thanks for your help Jacob!

  I managed to solve the problem on my end. What I did reinstall an older version of Illustrator CS6, where he (finally) had /enableContentRecovery somewhere in the Adobe Illustrator preferences file.

  After that, I opened the file recovered and removed the name of the instance (which, in this case, was "vertical arrow" who had problems) from the list and it worked. I got my rear backrest (with the instance of course lack).

  Thank you very much for your help guys!

• After downloading, I get a message that cannot open the application because it may be damaged or incomplete

  After downloading, I get a message that cannot open the application because it may be damaged or incomplete

  Please remove Adobe Application Manager to help cleaning tool and install Adobe Application Manager using this link: Windows | Macintosh