Cannot open the second project

Similar Questions

• RH9 uninstalled, but cannot open the old project of RH8

  I have Robohelp 8 on my computer. I won Technical Communication Suite 3, which include RH9, in a draw and installed in a directory without removing RH8. Then I read that RH9 converts the files to a new format which is not backward compatible with RH8. It scared me, so I disabled and uninstalled RH9 and other components of the TCS3. RH8 remains on my computer, and I can run it normally. But when I tried to open an existing HTML project, I received a message that the project is in a new format which RH8 cannot read. So I unzipped a backup copy of the project, but got the same message with it too. I never opened the project in RH9, and I am sure that I never even launched RH9 on my computer before uninstalling it. So what the hell happens and how can I go back to the use of RH8? I hope someone can help me!

  Welcome to our community

  Not sure why you would be skittish about the use of version 9, but whatever.

  Try to remove the. DPC to the project file and then it should reopen in version 8. Of course, a feature that is compatible that with 9 don't understand 8.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Cannot open the RoboHtml project

  I received the following message trying to open all my help files today: "open a project has been cancelled or the application could not load the database [project name and path]." I followed the instructions given in the technical Note "RoboHelp X 5 Instructions" for this issue but still cannot open files. In fact, I can not yet launch a new project more. FYI-there is no other user in one of these files, and the last time I opened one was about three weeks ago. At that point, I had no problem.
  
  What could happen, and what can I do about it?
  
  Thanks in advance for your help.

  On a computer with Word 2000 or 2002, X 5 will run straight out of the box. On a computer with Word 2003, you will need to download the service pack as described in my article on installing RoboHelp.

  Even without this, HR would install and work up until you try to do something a word related, so this isn't the cause of your problem.

  Make sure that IT allows to install your logon. Too often, they think it is easier to use their logons, because they have the correct rights. Unfortunately HR will work only if installed with your logon with admin rights and this problem has all of the features of you not having is not the correct rights.

• Cannot open the old projects with Prelude CC 2015.4

  I've just updated to prelude CC 2015.4. I don't know exactly what version I was running, but it was 2015.x. whenever I try to open an old project, freezes Prelude and closes.

  Too bad. It took just 45 minutes to open the project.

• Cannot open the LR project on the new system of Win 7 x 64

  Can someone tell me what is happening here?  I built a new PC, win7 x 64.  I put my LR database drive and my drive of LR in the new PC files.  The drive letters are the same as they were on the old PC.  I installed LR 2.7 on the new PC.  I opened the project very well file.

  After a reboot, I can open is no longer one of my old catalogss LR.  And I get a message like this.

  I get the same erros with LR3b2 catalogs.

  Your user name must be the owner or a member of the group that owns the player. Go to the Solution Explorer, click with the right button on the drive, properties/Security/Advanced/owner to see who is the owner and change for administrators (assuming that your username is a member of this group) or your username. Win7 is more strict on differentiate the permissions and ownership ala POSIX and LR seems to want property.

• Receives the following message when you try to open a project, "Captivate cannot open the fol.

  Receives the following message when you try to open a project, "Captivate cannot open the next project.  Ensure that the project is not already open... There is enough disk space... "All the critiria are put... still can't open the file.  Please help in the recovery of this project.

  Suggestions here:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/recover-corrupt-project

• Cannot open the project elements

  Hello!

  I use a MacBook Pro, El Captain, 2.4 GHz Intel Core i5, 16 GHz RAM

  Adobe Premiere Elements 12

  After you have created and saved a project I restarted my Mac. Then, after a restart I could not open the projector-elements:

  The following message if poster (in German) appeared: 'ist Das Projekt offenbar beschadigt. ES kann nicht open werden' (the project seems to be defective. It cannot be opened).

  I rebooted again and also tried to open project saved automatically - the same result files. Cannot open the project.

  Does anyone know how to save the movie...?

  Thank you in advance!

  Good news! Please mark this question as answered.

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Cannot open the file resource user interface

  Hi all

  I have to do an interview on a 2000 project (don't remember what version of the CVI was). I have 10 files IUR in the project and open all fine in the IDE, but one. I get the following message: "cannot open the Pnl_Main.uir user interface resource file (suddenly reached the end of the file).

  I've checked all my backup and they are all identical, so if there is a file corruption, he is old enough.

  In any case, here is the file, in case, can someone tell me what is wrong with him, or maybe open and re-record with an older CVI in case it's just a problem of version...

  
  

• Cannot open the application "iTunes" because another user is open.

  I recently bought a new computer with vista. Installed iTunes on this computer and found that there is a problem between the two profiles on the computer. I run iTunes on my profile - but whenever my wife profile is active we are getting consistent error messages indicating "cannot open the application"iTunes"as another user, he has opened." Ask the other user to quit the application and try again.

  I need to keep itunes open in my profile - and anyway, why are they bent them in two profiles in Vista... we never had this problem under XP.
  I asked Apple for advice, and they suggested to install itunes in the second profile... which I did and said to reinstall/repair...which is not the goal... Apple then told me to contact Microsoft support as he would have to do with the admin files...
  Any advice pls.
  Thank you

  Find the Itunes.exe in the Itunes folder in Program Files.  Right click on the .exe / Properties / compatibility, look down at the bottom of this page for the 'privilege level' and check the box that says "change settings for all users.  In the heartbeat window according to the box that says "run this program as an administrator".  This can only solve your problem if you can both run under the same user name.

  When you run a program as an administrator you should get a quick UAC (unless maybe you have turned off UAC?

  To see the file extensions, you may need to go into Control Panel / folder Options / discovers, there you can uncheck "hide known file type.

• Tried to open the Excel spreadsheet in Sharepoint, but get the message "cannot open the window because it contains the following features that are not supported by Excel in the browser: sheet Protection.

  I tried to open this Excel spreadsheet in Sharepoint and received the following message.

  "Cannot open the window because it contains the following features that are not supported by Excel in the browser:

  -Protection plate

  You want to try to open the message in Excel? »

  Learn more about the unsupported features.

  YES                       NO

  When I type 'Yes', I had then the second message.

  "To open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser must support opening files directly from Excel in the browser".

  What should I do?

  Original title: sharepoint excel files

  Tommy:

  I have 64 bit explore.  So I guess that the thought is that the error message was generated by the incoming file, as I have other files Excel I can access in Sharepoint with no problem?  I sent the file Outlook e-mail and was able to open it with no problem at all.  .

  Thanks for the information,

  Jim

• Cannot open the schema target

  Working on a BPEL project. Giving JDeveloper cannot open the target schema: null by trying to open the XSL mapping. It was working fine before.

  
  

  JDeveloper version: 11.1.1.7

  This is your version of Jdev is ps6. that is to say 11.1.1.7.0? I was facing the similar problem with SP6 but ps5's work corectly

  Whether to apply this Patch 17364195patch.

• CS5 - trying to load a new .asl style file - get "error, because no file format or the parser cannot open the file."  What gives?

  try to load a new style for a project.  CS5 PSD.  the .asl file when you drag in the RFSO gives follows her "error, because no file format or the parser cannot open the file."  What gives?

  .asl files are layer styles

  You can go to the window > Styles, then load the styles in the drop-down Styles menu of the