Cannot open the small metal door covering the memory cards.

Similar Questions

• Satellite A300 - cannot open the SD card

  Hello

  as you know, I won a Satellite A300, but my card reader does not work correctly. After inserting the card, it takes a long time to identify the card, then in my computer, the symbol appears but when I click to open the symbol "SD Deca", IE the map need to layout form or 'Please insert a card in the reader. Please note that the same card get identified in the external as usual card and card reader work entirely respective mobile (for micro SD) and the camera (SD).

  If I connect the mobile / camera by usb, no problem, everything is normal.

  Please suggest me how to fix card reader?

  Thanks in advance.

  Dimitri.

  Hi smarjit1,

  Have you tried different SD cards or just this one SD card? The SD card is probably the problem, what do you think?

  In addition, I would like to try an update card reader driver. The most recent driver, you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Check this box!

• HP C5180 AIO memory card reader. Trying to open the memory card, Windows 7 displays the error message "the handle is invalid."

  "Computer" shows the memory network card.  When you try to open it, I get the following error message...

  Location is not available
  Y:\ is not accessible.
  The handle is not valid.

  If I right click the icon and select 'Properties', then the properties of memory card appear properly.

  This memory card and HP C5180 work correctly on a Windows XP computer.

  HP C5180 is connected ethernet.

  You have installed the drivers of http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153481&lc=en&cc=us&dlc=en&lang=en&cc=us

• Satellite L670-DX1 - after the installation of SP1 cannot use the memory card reader

  Hello

  Since I upgraded my Satellite L670-DX1 of Win7 64 bit to Win7 64-bit SP1 (2 days ago) I can't use my memory card reader, he always says it is a bad card and I should reformat the card with any card.

  Does anyone have a similar problem or better yet a solution for me?

  Greetings

  You have installed SP1 using Windows update option?
  Have you tried to roll back the OS to an earlier time to see if the card reader is working properly again?

  Have you tried reinstalling the driver of the card reader?

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Cannot open the title, errors have been encountered at that point.

  Cannot open the title, errors have been encountered at that point. bought 3 Google books give all 3, same problem, ordered same title on one of Kobo store and have the same problem. No problem with no DRM products or small book DRM I bought. With the help of windows 10.

  And what error message you get exactly?

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• ID but cannot open the phone

  معرف ولكن لا يمكن فتح الهاتف

  I know that ID but cannot open the phone

• Cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.

  I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan).  When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.  Can I do to solve this problem?

  Try to install mode without failure. Hold the SHIFT key while rebooting.

• Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP

  Hello

  I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."

  I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.

  Thank you.

  Ray

  Hello!

  Have you installed the tools and all the other drivers of Toshiba?

  Search on the Toshiba site for a BIOS update.
  Maybe this can solve the problem.

  Good bye

• 9.1 Safari cannot open the page after el capitan 10.11.4 updated updated

  have an imac (retina 5 k, 27 ", end of 2014)

  4 GHz of processor intel core i7

  8 GB 1600 Mhz DDR3

  1 TB of flash storage

  running Safari 9.1 (11601.5.17.1)

  Safari opens but does not open the page - get - Safari cannot open the page - safari can't open the page because the server dropped the connection unexpectedly.

  Journal of the console after repeated attempts-

  

  appreciated all help to solve them.

  Go step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

• Receive "Safari cannot open the page. Too many redirects occurred trying to open google

  On a Mac OS X 10.7, when I try and access google/mail I get the message: "Safari cannot open the page. Too many redirects occurred during open yo... Any ideas?

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Then exit then restart Safari to test.

  If you see the same message, the redirects may be due to malicious software.

  You can download here free malware removal utility > https://www.malwarebytes.org/

  Or, if you would rather download MalwareBytes, you follow the instructions in the malware removal manually here > remove the unwanted advertising software that shows ads advertising and graphics on your Mac

• I may have inadvertently downloaded Firefox 5 instead of 4 and cannot open the application because it is not supported. Can I still download Firefox 4, which I was planning to do?

  I tried to update to Firefox 3 Firefox 4. But, after completing the download and then tried to open the Firefox application, I got a message saying: "Cannot open the application"Firefox"because it is not supported on this architecture." Is it possible that I may have inadvertently downloaded Firefox 5? I do not think that my system support
  Firefox 5. I'm not a geek, so I really appreciated any help you can give me. Thank you.

  • Versions of Firefox 4 and later do not run a Mac PowerPC.
  • Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
  • http://www.Mozilla.com/Firefox/5.0/system-requirements/

  For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html

• Cannot open the safari link after installing the iOS 9.3

  Cannot open the safari link after installing the iOS 9.3

  This is a common problem and there is currently no permanent solution yet.

  Try turning off JavaScript under settings - Safari - Advanced.

  I think that apple will figure things out soon.