Cannot open the URL is empty or illegal
RH11 | WebHelp
I get the message "Cannot open URL is empty or illegal" when I open certain topics in one of my projects. I can click OK and still open questions, but I'm not sure why this is happening.
Anyone seen this before?
Thank you
Jonathan
It is this line in your table that is the cause of the problem.
Set it to the same as other shaded lines and it works fine.
See www.grainge.org for creating tips and RoboHelp
Tags: Adobe
Similar Questions
-
Cannot open the URL of the CWA with ISE
Hi people,
I have a problem when you perform the CWA with ISE so that I can give you access to the network for the guests.
Everything is fine except the URL of the CWA: when guests, open Explorer and enter a domain name after you have connected the SSID, they will be redirected to the URL like 'https://hostname.demo.com:8443 / guestportal /... ". " which begins with the hostname of the ISE and the domain name of the ISE, but for us, we have not any announcement and the LAN DNS for our network so that we cannot translate the hostname.demo.com in the IP address of the ISE, so can I just change the URL type of intellectual property like"https://10.10.10.70:8443 / guestportal?
Screenshot of an attached screenshot (sorry).
Basically it's in the authorization policy, allows you to use a static DNS or IP address
-
Cannot open the cloud is empty
My CC icon is black and menu drop-down is a blank white screen?
You can also see:
If you have bad to start the creative Cloud Desktop application and the application shows a spinning wheel of progress or a blank white screen (or otherwise does not open), try the solutions below in the order. If a solution works, you don't need to try the next solution.
-
Help, please! Cannot download Illustartor, some fail to open the URL
Help, please! I just signed in and I wanted to download the free trial version Illustrator but I can not, I tried to fix it to find out what the error but he only said that Safari cannot open the URL of download and "there is no program specified to open the URL"aam://SAPCode=ILST?version=19.2.0?actionList=CC-UI?passPhrase=gvahwb4/pm4Kd+NJ44Hj/R01u3 sn2XIXXGDYMpeWSCO9KNYm4jpGnNGCPrmHyFIrVW70tWxPlpCDGENMqVN9JMSHbgXh6gIZ7hPmHUbnbqSeyF1VD0Re /NxqMxNMr9v20U0SXiyaWaNZdrlnlykANpdD1h7ZWeFuY0dgf4WEUtY ="."
Oh thanks for the reply, I have solved this problem, I downloaded creative cloud and now everything works. I didn't that I need dnuee. But thanks anyway!
-
Cannot open the illustration. The illustration contains an illegal operand.
Hi guys
Need help here, I was working on my case when all of a sudden, it crashed on me. When I tried to open it again, I got this error:
Cannot open the illustration. The illustration contains an illegal operand. Vertical arrow (car)
(Grid)
(LED \(4 numbers\ screen))
(LED \(2 numbers\ screen))
(Horizontal arrow)
(Vertical arrow)
From "... vertical arrow" go seem the names I gave my instances of the file (maybe wrong here?)
I tried to read a lot of help articles, including, How to recover an Illustrator file (HAVE). DesignPoint, but do not seem to solve my problem.Most of these items asked me to open Adobe Illustrator preferences and /enableContentRecovery the value 1. However, I've just updated my CS6 version 16.0.4 recently, and the /enableContentRecovery does not exist in the file.
If there is someone who knows how to do on this subject, I will be eternally grateful!
Thank you!
Thanks for your help Jacob!
I managed to solve the problem on my end. What I did reinstall an older version of Illustrator CS6, where he (finally) had /enableContentRecovery somewhere in the Adobe Illustrator preferences file.
After that, I opened the file recovered and removed the name of the instance (which, in this case, was "vertical arrow" who had problems) from the list and it worked. I got my rear backrest (with the instance of course lack).
Thank you very much for your help guys!
-
Click on the link-get "Windows cannot open the file" select a program?
After clicking on link get "Windows cannot open this file" have to manually "selecta program programs installed" Firefox appears as a choice and I double-click. How can I solve this problem / eliminate these extra steps
? Thank you Joe
I am running Windows XP, MS office Outlook 2007Is it a link in an e-mail message in Outlook? This problem arises from time to time.
While Firefox can usually set himself as the proper application to open the URL, you click in other programs, settings are sometimes blur or do not take. This article has tips to solve this problem: setting Firefox as the default browser does not work - what to do. Anything there help?
If the problem persists, is there something special about how you start Firefox? For example, you have this launch in a security 'sandbox' or virtual machine? You have all the command-line options set to allow several simultaneous sessions of Firefox, or call the Profile Manager? If none of this sounds familiar to you, the answer is probably not.
-
9.1 Safari cannot open the page after el capitan 10.11.4 updated updated
have an imac (retina 5 k, 27 ", end of 2014)
4 GHz of processor intel core i7
8 GB 1600 Mhz DDR3
1 TB of flash storage
running Safari 9.1 (11601.5.17.1)
Safari opens but does not open the page - get - Safari cannot open the page - safari can't open the page because the server dropped the connection unexpectedly.
Journal of the console after repeated attempts-
appreciated all help to solve them.
Go step by step and test.
1. turn off the power to the router. Unplug it from the wall. Wait a while.
Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.
Restart the computer.
Boot mode safe.
https://support.Apple.com/kb/PH18760?locale=en_US
2 remove Caches.db
Close all windows and close all applications.
Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.
Select 'Library' in the menu dropdown.
Library > Caches > com.apple.Safari > Caches.db
Right-click on the Caches.db file and select "move to trash".
Close the windows.
Restart and restart Safari.
3 empty Caches
Safari > Preferences > advanced
Tick the box "Show develop menu in menu bar."
Develop menu will appear in the Safari menu bar.
Click on develop and select 'Empty cache' in the menu dropdown.
4. remove the Cookies
Safari > Preferences > privacy > Cookies and other data from the website:
Click on the button "Details".
Delete all cookies except those from Apple, your internet service provider and the banks.
5 Disable Extensions and test them.
Safari > Preferences > Extensions
Uncheck 'Enable the Extension' and test.
Enable the Extensions one by one and test.
To uninstall any extension, select it and click the "Uninstall" button
-
Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:
S afari cannot open the page because the network connection has been lost.
The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.
No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.
I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.
Thank you!
Not "no matter where I am," means, it happens with all networks?
If so:
Try:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Reset all settings
Go to settings > general > Reset and tap reset all settings.
All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.
-Restore from backup. See:
Restore your device from an iCloud or iTunes backup - Apple Support
-Restore factory settings/new iOS device.
If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.
-
Since I have been to connect on Facebook, but it cannot open the Facebook home page.
Dear Sir or Madam:
Given that I was connect on Facebook, but it cannot open the Facebook home page, home page is empty, and he showed a massage on th botum of screen says "done, but with errors on page", I need help to teach me how to fix it. I am using Windows XP SP3, IE 8.
Thanks for your time and your attention. I Muta hear you as soon as possible.
Best regards
Henry
Henry, have you tried clearing your browser cache and cookies? Also, try a different browser (Tip: Chrome).
-
ERROR: Cannot open the data source for the user
Hello, I followed the instructions in the URL below
http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
and I get the ERROR: cannot open the data source for the user
I run the sql for the role but nothing
any ideas please.
Sun solaris operating system
database version 9.2.0.7Previous question that you were:
Where did you get the GoldenGate for Oracle 9i software? -
Cannot open the application "Mail" because PowerPC applications are no longer supported
I work on a MacBook Pro mid 2012
Intel Core i5 2.5 GHz
OS X El Capitan 10.11.6
The Mail app suddenly quit and when I tried to resume, I got this message
"Cannot open the application"Mail"because the PowerPC applications are no longer supported."
This also happens with the "Maps" app
All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.
I am confused to say the least. Suggestions? Thank you!
If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?
Try a reboot.
Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.
Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.
Isolate a problem by using a different user account
If the problem is still there, try to start safe mode using your usual account. Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.
-
معرف ولكن لا يمكن فتح الهاتف
I know that ID but cannot open the phone
-
I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan). When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported. Can I do to solve this problem?
Try to install mode without failure. Hold the SHIFT key while rebooting.
-
Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP
Hello
I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."
I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.
Thank you.
Ray
Hello!
Have you installed the tools and all the other drivers of Toshiba?
Search on the Toshiba site for a BIOS update.
Maybe this can solve the problem.Good bye
-
Receive "Safari cannot open the page. Too many redirects occurred trying to open google
On a Mac OS X 10.7, when I try and access google/mail I get the message: "Safari cannot open the page. Too many redirects occurred during open yo... Any ideas?
In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site
Then exit then restart Safari to test.
If you see the same message, the redirects may be due to malicious software.
You can download here free malware removal utility > https://www.malwarebytes.org/
Or, if you would rather download MalwareBytes, you follow the instructions in the malware removal manually here > remove the unwanted advertising software that shows ads advertising and graphics on your Mac
Maybe you are looking for
-
How to clean my iPad to have more space for the future. I don't know how to clean?
Use this iPad for five years. I would like to clean. Any help! Brij
-
iPhone 6 and LAW 10 - wrong battery level indication?
Had the same problems with heating, battery use accelerated, etc. and applied the fixes recommended wisely. However, my battery will indicate some remaining percentage, then suddenly show 20% or less remaining. Plug the charger causes the remaining
-
Satellite Pro P100-188: screen keeps blinking on and off at random intervals tension
If anyone can help me with my computer so please PLEASE publish it because I have no idea of what is happening to her. I just bought a new laptop, a Toshiba Satellite Pro P100 - 188 Dual Core and I'm having a problem with it. Sometimes (not all the t
-
I was wondering if its possible to update the iPhone with subversion (8.3 > 8.4) rather than a full version (8.3 > 9).
-
ASA 5545 and Anyconnect Licenses
Currently, we use several devices to Cisco ASA 5545. Initially, we learned that we were automatically allowed using the Anyconnect Secure Mobility client with our ASA devices. With recent security issues, we are trying to move to a solution that s