Cannot open vi dynamically when it contains tcp controls

Similar Questions

• Tried to open the Excel spreadsheet in Sharepoint, but get the message "cannot open the window because it contains the following features that are not supported by Excel in the browser: sheet Protection.

  I tried to open this Excel spreadsheet in Sharepoint and received the following message.

  "Cannot open the window because it contains the following features that are not supported by Excel in the browser:

  -Protection plate

  You want to try to open the message in Excel? »

  Learn more about the unsupported features.

  YES                       NO

  When I type 'Yes', I had then the second message.

  "To open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser must support opening files directly from Excel in the browser".

  What should I do?

  Original title: sharepoint excel files

  Tommy:

  I have 64 bit explore.  So I guess that the thought is that the error message was generated by the incoming file, as I have other files Excel I can access in Sharepoint with no problem?  I sent the file Outlook e-mail and was able to open it with no problem at all.  .

  Thanks for the information,

  Jim

• Error - Windows cannot open this file when trying to install Microsoft Gadgets.

  Original title: how to install gadget from Microsoft.

  I down loaded the gadgets and themes, when I go to install, Windows cannot open this file. If I get them from microsoft, it seems that windows can open.

  Hi mikemontgomery,

  If you use windows XP, it is not possible to install Microsoft Gadgets on it. Microsoft Gadgets are optimized for Windows Vista and Windows 7 only.

  However, you can use your favorite search engine to download third-party gadgets which can serve the purpose.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Reference: Desktop and SideShow gadgets

  Hope the helps of information.

  Please post back and we do know.

• Qosmio G35: Cannot open Web sites when WEP is set

  I have a Qosmio G35, I have no problem connecting to unsecure networks, but whenever I have to enter a WEP key, it says I am connected but when I open internet Explorer, I am unable to view all of the Web sites.

  Sometimes just with the normal message that you get when you have no connection "Internet Explorer cannot display the webpage". I tried ping the server and that has worked well.

  Any suggestions?

  Hello

  > I have a Qosmio G35, I have no problem connecting to unsecure networks,
  I suppose that the work of internet connection also with no problem when the WEP encryption is NOT defined

  Well, I put t know exactly why the problem appears, but I think that it is a software problem and that's why you should try to update the WLan driver.

  I put t know what Wlan card you use, but perhaps also a WLan Intel card. So check the site of Intel support for some updates.
  If you n t use the Intel Proset Wlan tool for wireless setup so download and try to establish a connection with this utility.

• Cannot open google automatically when you click on the button new tab since the last update of Firefox.

  I was able to do so until the last update... I spent through the process several times since, but without success... including adding the complete URL, etc.. The only suggestion so far is that 1 of my modules could be the cause, but I have still the same as before (they are edge Adblock, S3. Google Translator and yet another Smooth Scrolling)... it's frustrating!... and I'd love some help please... Thank you.

  Hi, for reasons of security, 41 of Firefox, you must use an add-on like tab override (browser.newtab.url replacement), to make changes to the page tab.

  Once installed, open the Add-ons (Ctrl + Shift + A) Manager > Extensions, and then look for the new tab override and click Options to set your preference.

  Note, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.

  You will then need to restart Firefox for all changes to take effect.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Cannot open attachments in Microsoft Works

  Recipients cannot open my attachments when I send them with Microsoft works.
  I have sent the same email to myself, and it does not allow me to open them.
  Attachments are always a wps not doc files files. How can I change that. Please be specific.

  In the case where it is not heard, I wanted to tell you NOT to save MS Works in wps. Save them to the doc format.
  You said "I have sent using Microsoft Works". This must mean that you have MS Works.
  So do not save it as WPS.

  t-4-2

• PpsPermission cannot open the path

  I have a problem when my application tries to access to the phone.

  The app show this debug info:

  [UI] {W} [10:20:09.463 06/05/15] [22128 KB] PpsPermission cannot open the path: "/ pps/services/phone/private/calls/.all?delta".
  [UI] {W} [10:20:09.490 06/05/15] [22144 KB] PpsPermission cannot open the path: "/ pps/services/phone/protected/calls/.all?delta".
  [UI] {W} [10:20:09.601 06/05/15] [22144 KB] PpsPermission cannot open the path: "/ pps/services/phone/public/calls/.all?delta".
  [UI] {D} [10:20:09.623 06/05/15] [22128 KB] failed to open object pps phone
  [UI] {W} [10:20:09.643 06/05/15] [22144 KB] PpsControl cannot open the path: / pps/services/phone/private/control
  [UI] {W} [10:20:09.660 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/protected/control
  [UI] {W} [10:20:09.679 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/public/control
  [UI] {W} [10:20:09.698 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/private/control
  [UI] {W} [10:20:09.716 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/protected/control
  [UI] {W} [10:20:09.735 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/public/control
  [UI] {W} [10:20:09.948 06/05/15] [24080 KB] PpsPermission cannot open the path: "/ pps/services/phone/private/calls/.all?delta".
  [UI] {W} [10:20:10.069 06/05/15] [24080 KB] PpsPermission cannot open the path: "/ pps/services/phone/protected/calls/.all?delta".
  [UI] {W} [10:20:10.094 06/05/15] [24080 KB] PpsPermission cannot open the path: "/ pps/services/phone/public/calls/.all?delta".
  [UI] {D} [10:20:10.122 06/05/15] [24080 KB] failed to open object pps phone
  [UI] {W} [10:20:10.146 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/private/control
  [UI] {W} [10:20:10.170 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/protected/control
  [UI] {W} [10:20:10.198 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/public/control
  [UI] {W} [10:20:10.225 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/private/control
  [UI] {W} [10:20:10.339 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/protected/control
  [UI] {W} [10:20:10.371 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/public/control

  Someone had this problem?

  ignore the warnings, it's just the usual journal spam

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

  I'm trying to reinstall windows vista for the following reasons:

  1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
  2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
  3. I need to clean my laptop.

  When I try to start the installation of a disk and I put in my product key, I get the following error:

  Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

  Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

  Rob

  Hi Rob,

  I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

  Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• Cannot open the illustration. The illustration contains an illegal operand.

  Hi guys

  Need help here, I was working on my case when all of a sudden, it crashed on me. When I tried to open it again, I got this error:

  Cannot open the illustration. The illustration contains an illegal operand. Vertical arrow (car)

  (Grid)

  (LED \(4 numbers\ screen))

  (LED \(2 numbers\ screen))

  (Horizontal arrow)

  (Vertical arrow)

  From "... vertical arrow" go seem the names I gave my instances of the file (maybe wrong here?)

  
  I tried to read a lot of help articles, including, How to recover an Illustrator file (HAVE). DesignPoint, but do not seem to solve my problem.

  Most of these items asked me to open Adobe Illustrator preferences and /enableContentRecovery the value 1. However, I've just updated my CS6 version 16.0.4 recently, and the /enableContentRecovery does not exist in the file.

  If there is someone who knows how to do on this subject, I will be eternally grateful!

  Thank you!

  Thanks for your help Jacob!

  I managed to solve the problem on my end. What I did reinstall an older version of Illustrator CS6, where he (finally) had /enableContentRecovery somewhere in the Adobe Illustrator preferences file.

  After that, I opened the file recovered and removed the name of the instance (which, in this case, was "vertical arrow" who had problems) from the list and it worked. I got my rear backrest (with the instance of course lack).

  Thank you very much for your help guys!

• InDesign Mac CC: "cannot open resource file' popup message when loading a feather in my plugin

  We have a pretty simple plugin for InDesign, which we have maintained since the time Pre-cs.  We would wear to CC.  Everything works on Windows and Mac, with one problem.

  The plug-in displays a file save dialog box, which is customized with a couple of additional controls for additional information from the user on the exported file.  As far as I know, there is no way to do it with the InDesign SDK directly, so we do it with code specific to the platform and resources.  Under Windows, we have this by calling GetSaveFileName in the Windows API and by setting a custom resource .rc and "hook" function with OFN_ENABLETEMPLATE and OFN_ENABLEHOOK.  On Mac, until CC InDesign, we asked the function of carbon NavCreatePutFileDialog, with a style file old Pier and an event proc handling kNavCBCustomize and al.  This has all worked for a long time great.

  However CC InDesign on Mac is 64-bit only, and carbon will not work with it.  So, we took the leap in cocoa and put implement with [NSSavePanel setAccessoryView:], where load us a NSView custom from a pen integrated into our bundle of plug-ins.  And it works very well also.  However, when the plugin code call [NSNib initWithNibNamed:bundle:], InDesign CC appears a warning message saying: "Cannot open resource file."  However, the resource (the pen) is obviously loaded correctly.  Thus, the user must dismiss this apparently false alert box before being able to move forward.  Once the alert is dismissed, the NSSavePanel works very well, with our custom NSView.

  I can say that the popup alert just InDesign itself, rather than a subsystem of Mac underlying as cocoa, because he has the title of "Adobe InDesign" and the gray dark background as the rest of the CC of InDesign and the OK button has an orange highlight around it.  It is clearly not a standard thing of Mac as a NSAlert.  And if I do the same calls to [NSSavePanel setAccessoryView:] et al. in a stand-alone application, obviously no this popup appears.

  It seems that somehow our call to load the file Nib triggers some kind of hook in InDesign.  My guess is that it's a hook for InDesign load its own resources, which is hanging by mistake in features our plug-in.

  I tried two approaches to load the Nib enumerated file here:

  http://StackOverflow.com/a/5855561/3207828

  And they both work, the pen is responsible and we can get our NSView to it and use it in the NSSavePanel.  But if we call [NSNib initWithNibNamed:bundle:], or [NSViewController initWithNibName:bundle:], CC InDesign displays the message box as soon as the call to load the pen is made.

  Why InDesign CC showing the message 'Cannot open resource file', and how can it be prevented?

  Thank you

  Dan

  I thought about it.  The problem was the plugin code to create a ResourceEnabler object, which is needed by older versions (CS *) of the plug-in on Mac to locate resources .rsrc for the call of NavCreatePutFileDialog of carbon with the carbon resource custom.   I #ifdef'd out so that the ResourceEnabler object is not created during the generation of Cocoa 64 bit for the CC and the offending message popup no longer appears.

  I do not understand why the ResourceEnabler object is needed for carbon, resources of the plug-in to the top of the stack of the resource, but I do not completely understand why the presence of the ResourceEnabler object would have an effect on a call from cocoa to [NSNib initWithNibNamed:bundle:], which also works fine.

  Note that simply create the ResourceEnabler object does not trigger the popup even if the bundle of plug-in contains no carbon resources to move to the top of the stack.  It's only when I go to load the Nib file that the ResourceEnabler seems to want to get involved and complain that it cannot find anything.

  So if anyone from Adobe is reading this, I would say that set you the ResourceEnabler feature so that it does not interfere with loading crane of cocoa.  It is perhaps best to just do the ResourceEnabler a no - op in InDesign CC.

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• NWZ-B172F cannot open, when it connected to the PC, it shows Mr. USB VERBINDEN. How to solve it?

  NWZ-B172F cannot open, when it connected to the PC, it shows Mr. USB VERBINDEN. How to solve it?

  Hi sean2sun,

  It seems that the player is not correctly recognized.

  What is the operating system installed on your computer?

  However, try to disconnect and reconnect the Walkman on computer. You can also try plugging it into different USB port of computer.

  NOTE: Connection to the USB hub is not supported. Walkman should be connected directly to the USB port on the computer.

  If the problem persists, perform the steps on the below technical support article:

  https://La.en.KB.Sony.com/app/answers/detail/A_ID/42398/p/57784, 59687,59899, 71847/c/65,75/kw/Walkman...

  If my post answered your question, please mark it as "acceptable Solution".

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Cannot open websites, error DNS when the ping command cannot resolve the name

  Cannot open all websites on a PC. (other computers on the network can access the sites without a problem)
  Error message is "Internet Explorer cannot display webpage."

  I can ping (internal and external) of the IP and gateway addresses.
  Ping translates:
  C:\>ping www.yahoo.com
  Ping request could not find host www.yahoo.com. Please check the name and try again.

  Nslookup translates:
  C:\>nslookup www.yahoo.com
  Can not find the name of the server for the address 192.168.0.1: non-existent domain
  Default servers are not available
  Server: unknown
  Address: 192.168.0.1

  Non-authoritative answer:
  Name: www-real.wa1.b.yahoo.com
  Address: 69.147.76.15
  Alias: www.yahoo.com, www.wa1.b.yahoo.com

  Pathping translates:
  C:\>Pathping www.yahoo.com
  Unable to resolve target system name www.yahoo.com.

  The problem occurs on a wired and wireless connection.
  Reset TCP/IP via netsh int ip reset c:\ressetlog.txt results in the following in the log file error message:

  discount Linkage\UpperBind for USB\VID_0B05 & PID_1723\5 & 2461925A & 0 & 5.  incorrect value was:
  REG_MULTI_SZ =
  SymIM

  Is there a total of 9 errors in the log similar to the one above.
  The host file has only 127.0.0.1 in there.
  Clearing the cache of the arg, flushing the DNS and do a repair on the network connection does not resolve the problem.
  Install a new network device does not resolve the problem.
  I also deleted all the antivirus software and security, including firewalls.
  The Windows Firewall is disabled.
  Boot in safe mode with Networking does not solve the problem.
  Running Winsockfix does not solve the problem.
  Internet Explorer 8 (reset web settings has been done)
  Windows XP Media Center with SP3
  Execution of the IE Diagnostics results in an error 12007 the server name or address cannot be resolved.

  Get the end of the line...

  Any other ideas?

  Thank you

  Larry

  Sorry for the late reply, but I did not have access to the MS Web site for a few months.

  I tried your suggestions, they do not work.

  The resolution is to do a repair of the operating system out of the CD.  Who cleared up the problem.

  Thank you

  Larry