Similar Questions

• Cannot pair Bluetooth with wireless GPS receiver

  Hello

  I just bought the software Garmin Mobile PC with a wireless GPS receiver. My computer which is the another OS XP manufacturer, who has the Toshiba Bluetooth Stack in it.

  The Bluetooth Manager is the Garmin GPS receiver, but not pair the two together. When I open the software so that it can find the GPS receiver, happening in Bluetooth Scan mode and just glue here until it times out with error message: "TOSBtMng.exe has encountered a problem and needs to close. We are sorry for the inconvience. Garmin technology and I was on my laptop and downloaded manufacturer site the patch/update, is always the same.

  Can someone help with this problem?
  I hope I gave enough information!

  I guess you have the original available your PC bluetooth stack. So I would try the following:
  -Install the last battery Bluetooth bluetooth Toshiba website:
  http://APS2.toshiba-tro.de/Bluetooth/
  -Configure your GPS device by using the "Custom" of the "Bluetooth settings" Mode
  -Remove the battery Bluetooth, but answering the question if the configurations of the device must be removed as well with 'no '.
  -Now install the battery Bluetooth that came with your PC again.

• Cannot pair iwatch with any bluetooth device

  No device is currently presented, it shows just looking...

  What can I do?, is it is a problem of bluetooth?

  You will find that you need to cancel your your iPhone Bluetooth device pairing (or any other device that already, it can be associated with) until you can pair it with your watch. If it is paired with your iPhone:

  • On your iPhone go to: settings > Bluetooth.
  • Look for the device in the list, then tap Forget this device.

  To connect a Bluetooth headset or other Bluetooth with your Apple Watch device:

  • Turn on your Bluetooth device in discovery / pairing mode (follow the instructions provided by the manufacturer of the device).
  • On your watch, go to the home screen (via a simple press on the digital Crown) > tap Settings (cog icon) > Bluetooth.
  • Your watch will now search for Bluetooth accessories that are in discovery / pairing mode.
  • Choose your Bluetooth device when it is shown.
  • If required, enter a password or PIN.

  More information:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

  Listen to music on your Apple Watch - Apple Support

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• LaserJet pro m401dne: fatal error, takes too long to connect with the printer

  Downloaded the driver of HP software, started installation and got to the point where it says to connect the printer, did, he recognizes it, start the data transfer and just takes forever. After ten minutes, I get fatal error takes too long to communicate with the printer, if aging persists restart the computer and try again.

  I've made this 3 times now and same result.

  Since my laptop doesn't have a cd drive, I copied the cd to a flash drive and installed the software from that. Worked perfectly. Something must be missing or corrupted download. Anyway problem solved

• cannot pair bluetooth for iphone 6 s

  have just updated our iphone6s phones now the phone does not connect to any Bluetooth legacy, we have always used a blueant Bluetooth headset on our other iphones, but they do not connect to the iPhone 6 s

  You may need to reset the BlueAnt. I use a Q2 and have no problem with my iPhone 6s using iOS 9.3.1. Check the instructions for the headphones and do a reset. After that, put the device in pairing mode and you should be able to connect to the iPhone.

• Where are my apps? And authorization of boredom PC with new Apple ID?

  Last January, I've changed my AppleID to a new email address. But I think that Apple always thinks that I have an old email address.

  Then, I connected my iPhone to my laptop to back it up. I him have not done since the end of last year. When this happens, iTunes give me two choices: set up a new device or 2) restoring my backup, which was made last November.  I don't want I want for iTunes to recognize my new phone, but iTunes will not.

  I also noticed that even after the connection, apps only appear are those under my old name of e-mail. And when I click on the app, my email_ _old is referenced. But I've changed AppleID as shown above. (Also, when I try to allow the computer to my _new_ email, I get an error message saying authorization was not made.)

  Hi JacobianWife,

  I understand that you have a new iPhone, and you try to save up to iTunes on your PC.  However, I'm sure about your comment "I changed my Apple ID."   Do you mean you went on the appleid.apple.com site and edited your Apple ID existing, or that you mean that you have created a new Apple ID?   Looks like you have created a new Apple ID, and if this is the case, you will not be able to access any purchase you make on your old Apple ID.

  What I would say is to contact our Apple ID account security team so that they can help you straighten it.  Once you do, you will be able to re-download your past purchases, and to save your iPhone again use iCloud or iTunes.   I would add some general information for you below, but in your situation, I think that individual support with someone who can access your account would be the best course of action.

  Contact Apple for the Apple ID account security support

  Apple ID - Frequently asked Questions

  On your Apple ID email addresses

  Manage your Apple ID account information

  Take care

• I can not connect with my apple on iphone 6s ID

  1. after turning my ID and password in the login fields and click login, nothing will happen if the iphone 6 s is connected to the internet. It's the same thing with Itunes, iclouds and all connection except safari browser portals.

  2.i can't update my iphone to ios 10 6s, when I click on settings = general software update: it says ios 9.3.3 your aoftware is up-to-date.

  Please can someone help me?

  Thank you!

  Hello

  Is your iPhone opportunity has it been used with another Apple ID?

  You must contact support.apple .com

  See you soon

  Brian

• You cannot associate computers with this Apple ID.

  Received the message "You cannot associate more computers that Apple ID" on my MacPro main, which is the main computer for all Apple devices.  But I used it this past weekend, so not sure what happened.  Just updated two phones for my children, and upgraded to the plan of the family music from Apple, would it be it? We have this MacPro, a MBPro, mine & wife & 3 phones & 3 iPads & 2 Apple TV children.  I logged on my iTunes account to "Manage devices" and a generic iPhone listed that does not have anyone there, but I can't remove it (the button is grayed out) - it just says: "iPhone (iPhone).  5 phones, 3 iPad and only the MB Pro are listed - the final spot is that the generic iPhone which I do not know what it is.  And now this MacPro is more listed.  Any suggestions?

  The following link may have something that will help you:

  Deauthorize your computer using iTunes - Apple Support

  View and delete devices in iTunes - Apple Support

• iCloud backup Notes and calendars with new Apple ID

  I changed my Apple ID since I changed my primary email address. How can I change on iCloud without losing my notes and my calendars? When I try to log in using my old e-mail address to connect with my other, it shows I'm going to lose everything. Please notify. Thank you. Joan Yonkler

  Change the e-mail address that you use for your ID Apple should not affect any on this. If you have created a new Apple ID, that would have an impact on what you are trying to do.

  Take a look at this.

  What to do when you have changed your Apple ID email address or password - Apple support

• No signal with new Apple TV

  Hi-

  IM replacing a bigger Apple tv (black unit) with a new Apple TV just bought.  Swapped the power and the HDMI cable and the people showing NO SIGNAL.  Connect Apple TV to and works very well.  Lite white is on the new Apple TV.  Plugged NEW apple TV directly on a newer TV and it worked...

  The old apple tv and hdmi cable that work are probably 3-4 years.  The existing old unit HDMI cable goes to a Pioneer receiver and which in turn outputs to the TV.

  All that I'm missing?

  Thank you

  Mike

  If you have tried it on another tv and it worked then the problem is located in the old tv

• Since upgrading to 9.2 this morning, Touch ID no longer works. I reset everything and now cannot even enter with fingerprints. It's all clean, but nothing happens. Grrrrr... Ideas?

  Touch is no longer works after upgrade to 9.2 this morning. I reset all the settings and can not get readmitted prints. Ideas? THX

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• iPhone iOS 10 and 7 take too long to synchronize

  New iPhone 7 128 gb, takes more than an hour of synchronization.  What I am doing wrong?

  Well, you have told us almost nothing.  You did the equivalent of going into the doctor's Office saying "Help!"  I'm sick! »

  • How do synchronize you?
    • Wireless?
    • Via a USB port?
  • What type of computer you are using?
  • What version of operating system have?
  • What version of iTunes are you using?
  • Had an iOS device synchronized to this particular iTunes before?
  • How is your iPhone?  Check the settings > general > storage & use iCloud > manage storage (in storage)
  • This version of iTunes you used to configure your iPhone?
    • Did you do a synchronization at this time here?
    • He was from iTunes (as opposed to iCloud)?
    • How long did that take?

• When you back up my files to a new hard drive, getting the error "destination path too long".

  Hello

  Today I was backing up my files on a new hard drive that I bought a week ago, and during the copy, I received the message following 'destination path too long ".
  And the file name is actually short "crouch" here is a snap of the image:

  http://imgkeep.com/0ij23kby74dn.html

  I don't know what to do!

  Original title: destination path too long?

  The key factor is not the name of the file itself, but the total length of the file name and the path of the folder.

  The help files for the application that you are using could tell you how long the total combination of the file-file may be [some more older can be limited to 255 characters, but I was not able to discover the current constraints].

• The db connection takes too long with connection of shared servers

  Hi all
  
  Operating system: Solaris SPARC 64-bit 11
  DB: 2 node RAC Oracle 11.2.0.3.5
  
  After a migration from a database of 40GBs of a 9i database to an 11g database, he is takin too long to connect to the db, which uses the shared server. At present, it is not all applications using the Pb, just me. Do a few tests, I saw that when I use a dedicated connection, I can connect almost instantly, but by using the shared connection, it takes almost 4 seconds to connect via sqlplus. Here are a few shared server settings:
  

  shared_server_sessions               integer
  shared_servers                          integer     1
  max_shared_servers                   integer     20
  dispatchers                               string      (protocol=TCP)(disp=5)
  max_dispatchers                        integer     5
  
  lsnrctl service
  
  
    Instance "INSTANCE", status READY, has 6 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:5 refused:0 state:ready
           LOCAL SERVER
        "D004" established:93 refused:0 current:0 max:1022 state:ready
           DISPATCHER <machine: orahml01, pid: 4073>
           (ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=65402))
        "D003" established:85 refused:0 current:0 max:1022 state:ready
           DISPATCHER <machine: orahml01, pid: 4070>
           (ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=44055))
        "D002" established:90 refused:0 current:2 max:1022 state:ready
           DISPATCHER <machine: orahml01, pid: 4066>
           (ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=41277))
        "D001" established:89 refused:0 current:1 max:1022 state:ready
           DISPATCHER <machine: orahml01, pid: 4062>
           (ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=61887))
        "D000" established:91 refused:0 current:0 max:1022 state:ready
           DISPATCHER <machine: orahml01, pid: 4060>
           (ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=44222))
  
    INSTANCE =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = hostname-scan)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = SHARED)
          (SERVICE_NAME = INSTANCE)
        )
    )
    
  INSTANCE1 =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = hostname-vip)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = INSTANCE)
        (INSTANCE_NAME = INSTANCE1)
      )
    )  
    
  
  INSTANCE2 =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = hostname-vip)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = INSTANCE)
        (INSTANCE_NAME = INSTANCE2)
      )
    ) 

  The alert.log doesn't show anything wrong.
  
  It can be the cause of this problem with shared server?
  
  Thanks in advance.
  
  Published by: Fabricio_Jorge on 03/27/2013 06:14

  You have five dispatchers/dispatchers and a shared server. A Dispatcher and five servers shared would be a more normal setting. Try to launch a few servers more shared, perhaps

  alter system set shared_servers=20;
  

  --
  John Watson
  Oracle Certified Master s/n
  http://skillbuilders.com