Cannot ping the host name of the operating system in vmware after intall kaspersky antivirus 2009

Similar Questions

• Cannot find the operating system files

  Cannot find the operating system files after system, Windows 7 error Ox490 HP Pavilion e9150t recovery

  Thank you very much I'll check on that.  Ended up doing a restore of the original.  Painful but successful.

• Cannot start the operating system

  Hi everyone, I've seen many similar scenarios. Not sure if mine is unique. I do not get a syntax error as others, and this was not due to the update of windows. Our suddenly stopped working.  I tried knocking PF12 w/out of the options for safe mode and couldn't get to a MSDOS command prompt I just get blank screen.  I have the CD to our computer that comes with it when we bought there are records of the operating system, but do not say recovery or restart the disk label so I didn't know if she would it reboot or rewrite it. All ideas and comments are greatly appreciated.

  Tell us the brand and model of the PC and what version of XP (Home, Pro, or MCE) runs as well as the Service Pack level.

  Do you have critical data on the backup computer?

  If this is not the case, press the "F8" key after the computer starts:

  support.Microsoft.com/kb/307852

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

  Sorry if this is going to be a long post.

  I've been running OS 428 and a hybrid (428 based) since it was leaked without a hitch. 2 weeks ago, my 9550 rebooted on its own with a JVM ERROR 534 (I think it's the code because the screen just turned white with the error message and then rebooted on its own). He never started up properly then. The boot process dates back to about 3/4 of the way then the FMV of error appears again then re - start. A batt pull does not help.

  I wiped and loaded (loader.exe) operating system but when loading cod, it will again restart (reboot occurs when email.cod is loading). Tried several times and never loaded properly. I tried a load OS 428 right and it went well. When it is started successfully, I wiped the device and loaded the hybrid that I used before and everything was fine. When filtered 451, I upgraded and everything is fine - for a week!

  He has just restarted on its own again. I think with the same JVM error code! I'm unable to load the operating system using loader.exe. I even tried the "loader.exe /nojvm" switch does not. I wiped with Jl_cmdr or BBSAK, still no go. I then used DM BB. I loaded OS 320 and loaded correctly. Then I wiped and loaded the OS. It is not load or when it loads successfully, the JVM error still appears 3/4 of the way of the boot process.

  So when I load OS 320, it will load fine even after a battery pull. If I use OS 428 or 451 (both narrowed via Shrink-a-BONE), JVM error no longer appears when using the device or during the startup process. Don't forget not that previously I was using either straight (shrunken) 428 or 451 and a hybrid with no problems.

  I decided to try a derelict OS 451 and used the "Platform.alx" of OS 320 file. It works so far! Pulled the battery about 4 - 5 times already and loaded all my apps and no JVM error for about 2 days. I tried right OS 320 and he also re - will start on its own several times a day.

  It looks like completely wipe the device using BBSAK, Jl_cmdr and DM BB do not really completely clear the device.

  What could have caused the reboots and error JVM?

  EDIT: I tried to wipe the device using the erase option in the security options. The status bar has reached 100% and then restarting the device, the FMV of error pops up again and my 9550 goes back to a continuous process of reboot (even pulled the battery).

  EDIT: I tried the command line "javaloade.exe usb - cloth" to wipe the device and the OS loaded (using loader.exe /nojvm) very well. In the end, shippers said "updated successfully". The unit restarted and about 3/4 of the way - another jvm error! I removed the battery and wait a few minutes before re - insert and is currently the starting now... Will update what's going to happen...

  EDIT: Yes! It finally starts. Will try an another battery pull... 1/4 of the way in which the boot process - another JVM error! Pulled the battery and restart... Error JVM still about 50% in the boot process.

  EDIT: Can't get any OS to load using 'loader.exe' or 'loader.exe /nojvm. It stops during email.cod loading, then restarts. I was able to load OS 320 well via BB DM. problem is when I click on Options, error: "error starting net_rimm_bb_options_app: symbol KeywordFilteredScreen.» KeyChar "not found" is my watered device? Help, please. Thank you!

  EDIT: I tried to load the operating system by:

  -remove the battery.

  -Connect to the PC.

  -Command prompt: command /nojvm loader.exe

  -When it says connection to the device and the battery with a red 'X' icon is displayed, I re - insert the battery.

  -The operating system loads very well but are unable to properly start like 3/4 of the progress bar startup occurs an error in the JVM and then reboot again. Help!

  --> Was able to start properly after a second reboot not forced. Will try a battery pull... JVM error again... Will allow it to boot on his own w/o a battery pull...  Error JVM... Removed the battery, re - insert... Error JVM... allowed to start on its own... Error JVM!... I remove the battery and reinsert after 5 minutes... JVM error yet... What is it recharges without end?

  Just had my 9550's replaced and all of the good mother!

• In the recovery system and he wants that I select configuration information. File, because it cannot find the operating system, but do not know what to choose

  Hello

  I am in the recovery of the system, which I have to by selecting f8 and "repair your computer", and after taking me to a window that says "select an oprerating system to repair...." If you don't see your operating system listed, click load drivers to load the drivers for your hard disks'.  Then when I click load drivers he wants me to select a file in System32 menu configuration information, but I don't know what to choose.

  Thank you

  Centi

  Hi centi,.

  1. Why did you start the windows recovery environment by pressing the F8 key?
  2. do you get an error at startup of the system?

  If you are unable to start Windows in normal mode, try the following steps:
  a. boot to the Windows recovery environment by pressing the F8 key.
  b. on the window that says "select an operating system to repair" click Cancel to see Windows Recovery Options window, and then select command prompt.
  (c) in the command prompt, type the following command and press ENTER: Bootrec.exe /RebuildBcd
  Output Type d and hit enter to close the command prompt.
  f. restart the computer in normal mode and check if the computer starts Windows successfully.

  Discover How to use the Bootrec.exe in the Windows recovery environment to troubleshoot and repair startup in Windows problems

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start the operating system preinstalled on Satellite L350-170

  Hello!

  Today I was surfing on the internet on MSN etc and my phone froze. I tried control, alt, delete etc and nothing happened so I finally pushed the power button.

  When I turn on the laptop now I get this:

  * Windows Error Recovery *.

  * Windows cannot start. A recent hardware or software change might be the cause.*

  * If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the people was interrupted during startup, choose Start Windows Normally.*

  * (Use the arrows to select your choice.) *

  Launch Startup Repair (recommended) *.
  * Start Windows normally *.

  When I choose the first option (startup to launch repair) a loading bar comes up saying "Windows is loading files...". ': then a loading bar "Microsoft Corporation", then this charge and brings me to a gray screen:

  http://i43.Tinypic.com/23jspqe.jpg

  When I select the second option (start Windows normally), I just get this loading bar for ages, and that the bar is load from the top down, I kept it at least half an hour, a few times and it still remains on the loading below bar:

  http://i43.Tinypic.com/sw3jbt.jpg

  Any help is much appreciated, thank you!

  Hello

  Start your laptop and press F8 to display the advanced startup options.
  Option repair my computer is available?

  If so this option allows to enter system recovery option. There is option called Startup Repair. Try using this option to solve this problem.

  Let me know if this will help.

• Satellite M60-167 cannot start the operating system

  The name of the model Satellite M60-167.

  Laptop turns off after a few minutes of work.
  Then I format C with Windows XP Pro, but it turns off as before.

  I did not finished the instalation and now I can't enter to finish.
  I had only blue screen same not the Toshiba screen on start.

  Can not enter the bios as well.

  Please help if you can and thanks for all!

  Post edited by: cota26

  Hello

  > Laptop computer just turn off after a few minutes of work.
  > Then I format C with Windows XP Pro, but it turns off as before.

  I think this sentence is the key description resembles your laptop could overheat and automatically stops.
  Why is this happening? Well, the laptop could overheat temperature high inside the laptop. It will stop automatically to prevent the equipment from damage.

  My long experience, a clogged cooling fans could be responsible for the bad cooling and the temperature high.

  So what to do?  :|
  In my opinion, he must clean the fans to get rid of dust and debris.

  The jet of compressed air is very useful tool and could help you to clean the fans.

  Hope this helps to get the laptop running.

• Cannot find the operating system at startup

  Using my Vista PC, I installed XP-Pro(32bit) disk a HARD tour, (which HARD drive has been correctly removed from the target computer), but now my Vista PC can not find any OS.

  (I HOPE a different permutation - thanks.)

  If you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro S500-10F - cannot reinstall the operating system

  Hello

  I have a Satellite Pro S500-10F provided with Windows 7 Professional with downgrade rights (and DVD) to XP Pro. I downgraded to XP Pro and everything worked fine (I did it on a number of similar machines).

  Then Windows started to have problems and crashing with BSOD. I decided to rebuild the machine to reinstall Windows XP Pro from DVD supplied with the machine. The thing is it gets 2% and then gives the BSOD.

  I thought it was the hard drive because there was some disk errors when it removed and put it outside of another machine, so replaced. Still the same problem. I tried to connect external USB DVD drive and boot from that. He did indeed start the external drive but then for some reason, try to copy the files of its own DVD player. I tried to reinstall Windows 7 Pro of the DVD to the top together, I created, this failed. I tried to install Windows XP Pro since version box and have failed.

  At this stage do not know if DVD player or what. He tried to build start player flash, but even if the system seen as boot option, then tried to boot from the network?

  Any help much appreciated.
  Thank you
  J

  Hey Buddy,

  To be honest I put t think that it is what you can do. You have tested the recovery disk and a new HARD drive, but the same happens. So that would mean it's hardware related problem.

  TOSHIBA recovery disk contains an image pre-tested all drivers and tools. This means that you can still install Windows recovery disc and it will work. If it's not (like in your case) it something wrong with the hardware.

  If your laptop is still under warranty valid, you can bring it to a service provider allowed in your country and guys can fix this for free because of the guarantee. Get in touch with technicians and explain your problem, they will sort it out for you. ;)

• HP t5740e Embedded W7 - cannot update the operating system

  Hi all,

  I have the above computer ThinClient. I am logged on as administrator, but I can't seem to update the OS because only the administrator can do? Still, I am logged as administrator, so what gives? :-)

  Hello

  Click on the link to help fix your problem

  http://support.Microsoft.com/kb/971058

  Hope this Helps

  Checkurtech

• Sony Vaio suddenly do not recognize the operating system information (sometimes ask my computer to claim it is not authentic) after owning nearly 2 years

  I have had my Sony Vaio from January 2011 and I bought from Best Buy with Windows 7 pre-installed. I had no problems with the operating system being true til this summer when my computer wrong not dated and crashed my anti-virus software (screen was blue and the system had a difficult time in commissioning. After much patience and research, I fixed my computer and removed the faulty software. However, sometimes my computer does not recognize my product ID of Windows 7. When I start first my computer, the information is not available and that my computer updates, it will not update as it does not find the correct information. With this, my computer started to warn my that I am victim of counterfeit software. I have no idea where all this comes from and why is - it now say my software may be counterfeit? In the last year and a half, I never had this problem. Also, after a few minutes, my computer cannot find the operating system information and says that it is authentic; which leaves me more confused than ever. Gah. What is happening and what I can do to fix this? (I own the software disc, I got when I bought the computer, but I do not currently have access to it).

  I suggest you backup and do a reinstall.

  You should consult the documentation supplied with your Sony's Vaio computer on how to reinstall Windows 7. Usually this requires that you start in a recovery environment.

  Please see this article on how to reinstall Windows 7 on a Sony Vaio

  http://eSupport.Sony.com/us/Perl/support-info.pl?template_id=1&info_id=507#driver

• Cannot ping the Virtual Machine by host

  Hi all,

  Please help, I use VMWare Workstation 6.5 and I have a physical operating system which is Windows XP SP2, I have a network card, but not connected to a physical switch, the IP address is 192.168.0.1. I installed a Virtual Machine using Microsoft Windows 2003 server as the operating system, promote as domain controller, install the DHCP, DNS service and assign an IP 192.168.0.2, no default gateway.

  My VMnet1 on physical operating system has an IP 192.168.204.1 and VMNet8 has an IP 192.168.126.1.

  The host, I cannot ping the 192.168.0.2 which is the IP address of the Virtual Machine. Even in the Virtual Machine, I can not ping 192.168.0.1 is the IP address of the host. From what I read, the physical and the virtual machine were connected with a virtual switch. Am I wrong?

  Any advice?

  Thanks in advance.

  They SEEM to be in different networks, you need search routing between them,... since they differnet networks...

  on the other

  they do host and the virtual machine on the same subnet / network for EXAMPLE: class C class network 192.168.200.0/24

  granting of points if my answer was helpful... Thank you > > > > > > > >

  concerning

  Joe

• Cannot perform the operation while the host belongs to a Windows domain.

  Hello

  I'm trying to change recording alter DNS for a host of esx5.1 via vCenter but the following error;

  Cannot perform the operation while the host belongs to a Windows domain.

  The host is joined to the domain, but has a static IP configuration. I prefer to change registration without disrupting the VM on the host.

  Any advice would be appreciated

  Thank you

  M

  FYI, I got this problem by leaving the field, change the DNS settings, and then join the domain.

• After that stright connected to iSCSI (initiator) Host cannot ping the server iSCSI (target), but the target can, why?

  After that host on vSHere 4.0 strightly connected to iSCSI (initiator) host cannot ping the server iSCSI (target), but target can.  And iSCSI works well. I mean I can create and use the iSCSI disk, why? It makes me confused.

  Thank you!

  Geoarge,

  iSCSI traffic uses a VMkernel port, instead of using the command 'ping', use 'vmkping '.

  André

• What support VMware Windows 7 as a guest host and Windows Server 2003 as the operating system operating system?

  People,

  Hello.

  Because my laptop is preinstalled Windows 7 and cannot dual boot multiple operating systems. I need to install VMware in Windows 7 host and then install Windows Server 2003 as a guest operating system.

  I installed VMware Server 2.0.2 in Windows 7 and Windows Server 2003 operating system as a guest host. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333 / IU cannot display more.

  I found that Windows 7 is not a host for VMware Server 2 and strange operating system might happen at any time. I found that 'VMware Player 3' is fully supported in Windows 7 as host operating system but is not taken in charge of Windows Server 2003 as a guest operating system.

  People knows what product VMware Windows 7 support as host operating system and Windows Server 2003 as the operating system prompted?

  Thanks in advance

  Hello

  IMHO, I think that Workstation is the vmware product just for you, the requirements

  It supports Windows 7 as a facilitator and Windows 2003 as a host with no problems. You can be confident about it at 100%.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!

  Virtually noob blog