Cannot perform the operation while the host belongs to a Windows domain.

Similar Questions

• Message: Cannot perform this operation because the default mail client is not properly installed

  I get the following error message:

  Cannot perform this operation because the default mail client is not properly installed

  Could someone help me please?

  Moved from the community involvement Center

  Hello

  You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.

  The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

  Windows Live Mail is popular
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
  Is Thunderbird http://www.mozilla.org/en-US/thunderbird/

  Windows Essentials help:
  http://Windows.Microsoft.com/en-us/Windows-Live/Windows-essentials-help

  You can access outlook.com via Windows Live Mail

  Set up an email application with Outlook.com - Microsoft Windows Help:
  http://Windows.Microsoft.com/en-us/Windows/Outlook/send-receive-from-app

  After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.

  Web-based e-mail services can only be made the default e-mail program in these 2 cases:
  * Yahoo, with the Yahoo tool bar
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
  * Gmail with the installed Google toolbar

  https://support.Google.com/toolbar/answer/34800?hl=en

  Don

• When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail client is not installed properley)

  E-mail client

  When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)

  client is not installed properley) thanks Karen

  When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)

  client is not installed properley) thanks Karen

  Hello

  Please see the post below for links to support for all the popular email client programs.

  Where can I get help with my questions by e-mail? (Windows 7)-Microsoft Answers:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/where-do-i-get-help-with-my-email-questions/461490c7-302b-4cc8-bcd9-127e177d71c3

  Concerning

• I get a message "Cannot perform this operation because the default mail client is not properly installed". What should I do?

  I get a message "Cannot perform this operation because the default mail client is not properly installed".  What should I do?

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

  In this forum, you will find some support for Outlook: http://answers.microsoft.com/en-us/office/forum/outlook

  Note: Office 2010 Home and Student Edition is not include Outlook.

• Error #3200: Cannot perform the operation on the window closed.

  Hello

  I am trying to open a new window in an extension of CS, but when the test inside the first as an Illustrator, it gives me the error

  Error #3200: Cannot perform the operation on the window closed.

  When I test as a stand-alone desktop application, it works very well.

  I tried it with a window pane mxml, as well as with the code, such as:

  var newWindow:Window = new Window()

  newWindow.title = "new window";

  newWindow.width = 200;

  newWindow.height = 200;

  newWindow.open (true);

  I use a WindowedApplication.

  Flex 3.5

  2.7 AIR

  Flash Builder 4.5 (do not use the Extension Builder)

  Thank you!

  Jeff.

  I'm sorry. I answered from memory. I remembered a little trouble. You did, but you must set the type.

  Here's how:

  victory: MyCustomWindowType = new MyCustomWindowType;

  win.showStatusBar = false;

  Win.type = CSXSWindowType.MODAL_DIALOG;

  Win.Open ();

  You probably want to create a component based on the window.

  In addition, you must use CSXSWindowedApplication. It is possible that it took for this...

• Cannot perform the iTunes update

  Hello
  Try to update iTunes, I received the message (attached, in German):

  "There is a problem with the Windows Installer Package. As a result, cannot perform the update of iTunes. Contact the technical support. »

  What can I do?

  Thanks in advance for the help.

  Best regards, Alpe1

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.

  TT2

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• Cannot open a file error where zip is a "compressed (zipped) folders error". Windows cannot perform the extraction.

  Original title: loading with a password required

  I'm trying to open a zip via windows 7.  Same error occurs on windows xp.  There is a "compressed (zipped) folders error" error  Windows cannot perform the extraction.  The destination file could not be created.

  I recently got 8 deleted window and window 7 set in... I've never had a problem before

  Hello

  1. Using default Windows 7 application or any other 3rd party application?
  2. What type of file you are trying to open?
  3. You try to extract the zipped file documents? If so where are you trying to save?

  I suggest you try these methods and check the status of the issue.

  Method 1

  Try using Windows to extract the zipped files

  http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files

  Method 2
  Perform the check and the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ &#60; LANG_NAME &#62; \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• The system cannot find the specified file. C:\WINDOWS\system32\ &#60; LANG_NAME &#62; \mstsc.exe.MUI

  Hello

  I get the following message appears when I try to start a remote desktop connection (the shortcut target is % windir%\system32\mstsc.exe).

  This used up until one of my pc, including all upgrades of Windows reinstalled.

  It is on a Windows 7 pc with all the service packs and updates.

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  I have a Dutch version of Windows. The mstsc.exe.MUI file is available in C:\Windows\System32\nl-NL

  It was not available in C:\Windows\System32\nl, but after that I copied it on I still get the same message.

  I even copied the entire content of the... \nl_NL folder in the... weather folder and still no luck.

  Isearched the internet for more solutions but nothing has solved the problem.

  Thank you

  John-Pierre

  OK problem solved.

  I ran the scan of the updated and all updates already installed.

  I checked the list of updates installed and already had KB2592687, KB2574819 installed.

  However, when I looked under installed updates, it showed KB2592687 and 3 others in English while I have a Dutch version of Windows.

  

  So I decided to uninstall the updates English 3 so I could reinstall it again.

  "Note that after uninstalling these 3, Remote Desktop already worked again.

  Apparently, these 3 uninstalling uninstalled a lot more, because after a reboot, there were 10 updates available instead of only 3 that I uninstalled). And after installing them and another restart there was even more updates available. Overall, it took three update sessions and restarts all up-to-date again.

  Although the list of installed updates again 3 updates in English, Remote Desktop works now. So obviously something has went wrong with one of the previous sessions of Windows Update.

• Cannot complete the update of security for Windows Vista (KB2961072)

  I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

  I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

• Cannot install the printer HP C4500 on Windows 7

  Cannot install the printer HP C4500 on Windows 7 - printer installation disc only supported by xp and vista.  What should I do?

  Yes, your solution worked, and I was finally able to connect my C4500 printer as wireless.  Thank you very much for your help!

• The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file. Error 105

  I am trying to install a HP printer.  When I run the setup.exe and click the install, I get the message:

  Setup initialization error

  The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file.

  Error 105

  When I do a search for the error message I get no results.  So I ask the community if there is a fix or work around this issue.

  Hello

  What version of windows you are using?

  The program is not compatible with your version

  List of limitations in 64-bit Windows
  http://support.Microsoft.com/default.aspx/KB/282423#appliesTo

  To run the troubleshooting program compatibility Troubleshooter

  1. Open the troubleshooting program compatibility Troubleshooter by clicking the start , and then clicking Control Panel. In the search box, type troubleshooting tool, then clickTroubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. Follow the instructions contained in the resolution of the problems.

• Cannot perform this operation because the default mail client is not properly installed... help

  I can't send an e-mail from a link on a page without getting this error... "could not perform this operation because the default mail client is not properly installed"...    My windows mail is set as default and I can receive and send him good, please help.

  Thank you

  A program is defined as default does not mean that it has considered all of the default roles available.  In the case of Outlook 2007, there are 13 total default values that can be assigned, and it should have each of them.  It is possible to default Outlook for e-mail, but not the default value for write links in web pages.

  HAL

  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com