Cannot play where right at the database
When I try to install Windows XP service pack 3, I get the "Cannot read or write to the database" error how to fix this?
WinXP SP3 has been available for almost 2 years now. How do you get just to install it now?
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?
See...
When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed":
http://support.Microsoft.com/kb/949377
WinXP SP3 - read all the prerequisites for a successful installation
http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx
Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009. This support will cost you 59 US$ per incident now.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Tags: Windows
Similar Questions
-
I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.
Click Start, type: Internet Options
Press enter
Select the "Advanced" tab
Under reset Internet Explorer settings, click "reset".
This should restore the Internet Explorer default settings.
Then reinstall Flash Player
http://get.Adobe.com/flashplayer/
----------
Flash Player
Troubleshoot installation of Flash Player for Windows
http://kb2.Adobe.com/CPS/191/tn_19166.html
Troubleshooting player stability and performance
http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html
Uninstaller
http://kb2.Adobe.com/CPS/141/tn_14157.html
Flash Player Support Forum
-
Cannot open a session in the database
Hello
I have a problem to connect to my database 11.1.0.7 on linux 64.
There have been migrated from 9.2.0.4 and everything was fine, but now I am not able to connect to the database.
Go when I can connect is the startup of the database in RESTRICTED mode and I cold connection under sys (sysdba).
But when I leave this mode, no one can connect.
sqlplus is freezes and I have to kill this session.
What could be a reason? All the settings?
It's strange to me because he was working...
Thank you.
Kind regards
TomCross-using the check job_queue_process
SQL > show parameter job_queue_processes
Then stop and start the database, see if the problem persists.
Thank you
http://www.DBAs-Oracle.com/ -
I recorded my own music on several cd (using a computer with XP). I took these CDs and I snatched a few pieces in Win Media Player (on a more recent with Win 7 laptop) so I could do a "best of" disc type. I made 2 of them before. Now, I can't burn the same playlist titles to a 3rd cd because I get the message "can't read, burn, or synchronize the file because the media rights are missing." There is no right of media since I recorded this music and I have already burned 2 CDs of this same music on this same computer. Why they were so short?
I downloaded the software updates. Could it be the problem?
How can I replace this error message which is in error?
Thank you.
You cannot, if it is, the security protection would be worthless. It would be like cracking after a password. It's a shame, I know, but you will need to copy the files again without any protection applied.
-
Cannot play music files in the Amazon (m3u)
Windows 7 x 64
Firefox 39.0.3I still managed to play music in the Amazon files until either a Windows or Firefox recent update - don't know which came first. No matter now as Amazon apparently use m3u files & I don't seem to have a plugin for them it keeps wanting me to download or save etc, which is not what I want to do with I want to taste a few tens of individuals.
I have VLC and WMP plugins media both always active value & restarted Firefox many times while working through this issue, but probably none of these work for m3u files? I've read more articles on similar issues, but none of the various fixes have worked for me for example on: plugins options - True (not sure exactly that one is that I had to change). I downloaded and tried to install a 'media pack' for Win 7, but that no longer works.
Never had this problem until recently through several updates to Windows & /or Firefox so a bit puzzled as to what else to do. The only types of files mentioned in the Options are mp3, 4, mpeg4, wmp.
Appreciate any ideas. Thank you.
Please upgrade to the latest version of Firefox:
The former autour work should do an add operation, try Firefox is Mode without fail to ensure that it is not not a problem with an add we:
Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- Click the menu button
click Help
then select restart with disabled modules.
If Firefox does not work, you can start Firefox in Mode safe as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
When the Firefox Safe Mode window appears, select "start mode safe."
If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- Click the menu button
-
Cannot play command and conquer the first decade
Original title: does not load in entriely
Hi all
I command and conquer the first decade on my computer, so about 4 days ago. If the disk loads up in the game selection menu, I click on red alert 2 with the file of the revenge of yuri. My computer screen everything turns black and acts as his charge, when all the brough sudden im back to the selection menu... help?
Hello
· What operating system do you use?
· Were you able to play forward on the system?
Try the game CD in another computer and check if you are able to play the game or not.
If you use Windows 7, then the game is not compatible. Click on the link below.
The game is not compatible with Windows Vista.
Step 1:
I suggest you to uninstall the game and reinstall in compatibility mode and check if you're able to play the game or not. Follow the steps mentioned in the articles given below to uninstall the game from the system and install compatibility mode.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cannot play audio files on the Internet
Original title: I don't hawe musick and sound on the internet
When I want to lisen musick on internet, I can't. Why?
I've been trying this drug, but I've been gething nothing so please helpHello
1. are you able to listen to audio files stored on your computer?
2. do you get an error message when you try to listen to music on the internet?
3. What is the format of the files you are trying to play?
4. which browser is installed on the computer?
Proceed as if you have Internet Explorer installed on the computer.
a: open Internet Explorer.
b: click on Tools > Internet Options.
c: now click on the Advanced tab.
d: now navigate in the multimedia section.
e: place a check mark the option " play sounds in Web pages.
f: Click apply , then ok.
Hope this information helps.
-
Cannot play music files in the car
original title: music files
Hi player I have in my car will not play some music files on a flash drive, the files are wma and are compatible with the player, he plays some wma files, can anyone help please.
It could be a variety of reasons. If able to read certain files WMA but not others, it could be a bit rate or file corrupt or many other reasons. Some car stereos are limited to a certain bit rate (320 Kbps). Everything depends on your Hi-Fi and WMA files are coded as, among other factors.
-
Cannot play music files in the Source (CS6) monitor
I just met a very strange problem today that I can't fix.
If I click on an MP3 or WMA file in the project window, it will not play in the source window. It blocks all the other windows and I have to restart the first.
Sometimes, he will play in the windows, but then there is no sound even if the meters are moving.
However, I can play the music in the Source window if I double click top in the main timeline. everything is normal to do this way.
I have no problem with playing in the Source window MXF files.
So for now, I can't see any music file in the source window.
Anyone know what could be the problem?
My PC spec is:
I7 3930
64 GB of ram
4GB nvidia 680
Card SB X - Fi Creative sound
C drive: SSD
D drive: 300 GB Raptor > Scratch disk
F drive: RAID 3 array > videos
Media cache is drive D and the option "Save media cache files next to the originals when possible" checked.
Thank you
Thank you. Try again, one more down. (Audio)
Also, replace 5.1 mix front only.
-
Cannot choose where to install the player
Installer & MyAdobe Reader download ran in a single step, never allowing me to choose where to install it. It is a big problem, because my C: drive where it is lacking of the installation was already short of disk space. I need to be able to choose where install the program myself, not to be forced by Adobe to accept installation of the C: drive. Is it possible to direct the installation, or move it now that it is already installed? I have an SSD, that I want to install it.
I don't know how to install Adobe Reader "in one step", without passing by the different install panels, which allows me to choose the installation location (change Destination folder):
It is the Panel installation Reader 9.4, as I have not installed X drive on my system.
You can download the executable installer from http://get.adobe.com/reader/enterprise/
PS you can not move an existing installation; You must uninstall your current drive, then install again in a different location.
-
When I click a link on a Web page or other software, I want to open in a window, completely new.
You can hold the SHIFT key and click the left button of the mouse a link to open this link in a new window.
The setting in tools > Options > tabs is only for links that specify a window target and you can hijack such a link in a new tab instead.
-
Cannot find where I installed the malware removal tool
It seems that I have the malicious software removal tool, but I can't locate it
Hello
· How do you know that you have the tool to remove malware on the system?
If you have Malicious Software Removal Tool installed on the system then, follow the steps mentioned below to run the tool on the system.
a. Click Start, run.
b. Type MRT and press enter
You will be presented with a screen, click the next button
c. normally, the removal tool runs fast, but for a more comprehensive result scanning, choose COMPLETE SCAN and click Next
d. now the malicious software removal tool will scan your entire hard drive for infections and problems.
e. once the scan is completed, you should see the screen depending on the State of your computer, be it free from infection or not.
f. If you click on the detailed results from view of the Scan option on the results page, you should see that virus, worms and Trojans the removal tool scanned for and if an infection has been detected.
g. click on finish in the scan results page to leave the Microsoft Malicious Software Removal Tool.
I suggest you return the item mentioned below.
The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP
-
where to download the database 10g of Basic...
Hello...
I improve my database 8.1.7.4 to 10.2.0.3
I'm going to 10.2.0.3 patch 5337014
recourse to download database 10g of Basic...
Concerns
SBJHi, http://www.oracle.com/technology/software/products/database/index.html
-
AIR SDK 15 cannot play the video in h.264 with audio SPEEX
AIR 15 for Android SDK
RTMP h.264 video live of Bug, not not using StageVideo
AIR app cannot play live video in the h.264 format with SDK 15, it just show a black in the video, container but fine SPEEX audio playback screen.
If you send the first video stream with no audio, it will play very well on the client, but if you add audio during the stream, the video on the client flashes and turn black and will play the audio.
Tested Soft edition with SDK 14 and it works perfectly.
Sorenson on-line audio and video stream plays very well on SDK 15
Hi Roshan,
This problem was solved by AIR 18! Awesome! Thank you, Roshan and Adobe!
-
Convert the database to 10 v to v11
Hello
I'm unable to convert and merge a v10.1 v11 user database. I made a backup of Usrcomp_S.usr to another folder in Windows then used the merger of Multisim and Ultiboard and conversion tools. Here are the steps I followed:
1 tools > Database > convert database...
2. Select Source in the dialog context database names.
3. navigate to the database using the Windows dialog box. Select my copy of database using "All Files." Curiously he is not using the default filter. Select OK and then the following error:
The path of the database: "database\UsrComp_S.usr" was not found or not set.
You want to select the path where the database of component?4. Select Yes then select my now visible database of the dialog Windows.
5. press start to convert my database to aid auto rename. Briefly, something happens that seems to be the conversion and the window convert watch Done
6. close the convert and open tools > database > merge a database...
7. Select a name of the component database
8. Repeat step 3 above. The allegedly converted database is still not visible but this time there is no option to "All Files." In the file name drop-down box I choose the path previously used for the database copy. Select open and receive the following error message:
The path of the database: "database\UsrComp_S.usr" was not found or not set.
You want to select the path where the database of component?9. Select Yes then select my now visible database of the dialog Windows.
10. press on open and receive the following error message:
Error: Could not open the database [user data].
The file format/version does not, and cannot be merged.
If the database is from a previous version, use convert the database.Help, please. This should be a simple process of a button to import parts of the user of a previous version.
Richard
Hi Richard,
I think you are trying to convert the incorrect database. From the name you specified (Usrcomp_S.usr), it's just a CDS model uses to create a user database, it is not your user database.
On Windows XP, the user database is located in C:\Documents and Settings\
\Application Data\National Instruments\Circuit Design Suite\11.0\database\ On Windows Vista/7, the user database is located in C:\Users\
\AppData\Roaming\National Instruments\11.0\database\
Maybe you are looking for
-
How to restore a security entrancecode that was not installed by updating to ios10?
Work with the 5s iphone I recently could update to ios10. I did it during the evening. In the morning, I was told the update required an entrycode that was not installed. I use an entrycode before this and the same works after that. No longer is my a
-
How can I configure Windows Home Server also act as a Minecraft Server?
WHS xfer files and can currently running, see the server and everything on my network but I am unable to create a homegroup, also I'm trying to set up a minecraft server and everything is running but I am unable to directly connect to the server from
-
OfficeJet 6500 new black cartridge installed, but print Brown (all colors) instead
Hello I replaced the black cartridge in my OfficeJet 6500, and clicking on it. (I triple checked it.) However, when I try to print a document that is supposed to be any black ink, it prints in a Brown shade as if it is mix inks instead of using bla
-
Just got a new Toshiba NB255 today... when I look at the networks without wire around mine shows up... it is not guaranteed... I can not connect with her. My other laptop Toshiba works fine. I can connect with the Netbook with a wire but it is not wh
-
Free download of QBASIC. EXE. Microsoft
where do I get the free download of the programs mentioned above