Cannot press Yes on my stream 7 at startup after change to rearm windows to Trusted Platform Module
dialogue of blue screen that I can't go beyond that I said yes or no to identify or reject to clear the tpm. Not recognize his touch and even when I plug a keyboard via otg used not work either.
You connect the adapter to the OTG and USB keyboard in front of you it turned on? It is probably necessary to configure the port of loading to the mode of the host. If it still doesn't work try holding both volume and volume buttons together at the same time and then feed up to reset the BIOS, (it takes three fingers).
Tags: HP Tablets
Similar Questions
-
My Hp Notebook PC 11 Stream works fine on Windows 8, 1 until I updated to windows 10. Now the touchpad is dead. I have to use a USB mouse. In Device Manager, all the drivers work fine. Any clue?
Thank you for visiting the Forums HP's Support and welcome.
Information below can help you
Make sure your keyboard is on
Check in the settings 'Mouse & touchpad' to ensure that the touchpad is enabled.
Open the Settings menu (Start > settings) and go to devices > Mouse & touchpad. Scroll to the bottom of the screen, and then click additional mouse options.
The mouse properties window opens. Click on the tab more far to the right (it may be called MOMENTUM ordevice settings). Under devices make sure your keyboard is not disabled. If it is disabled, click on the touch pad to select, and then click Activate.
Another thing to try is to see if your laptop has a function button that enables / disables the touchpad. It should look like a tiny touchpad with a diagonal line through it (on my computer laptop is F6, on other laptops we Fn + F5, Fn + F6 , or something else entirely). Try to switch this key if you have before you panic on the misfortunes of possible touchpad.
Update your drivers
Windows 10 has been out for a few months now, and most of the manufacturers of touchpad have updated their drivers accordingly. But you may need to manually update your driver.
There are two ways to do this. First, click on the Start button and select Control Panel. In the Control Panel window, open the Device Manager.
By clicking on "update driver software... "will your computer Internet search for an updated driver.
Best regards;
Marcel
I am an employee of HP
Please click the White Star Kudos to say thank you for helping.
Please check accept as Solution if my help has solved your problem.
-
Cannot install the Trusted Platform Module Driver / software
I am not able to install the driver of the TPM secure and so I'm not able to install the TPM software... I have a satellite u200, and it's on my tools and utitilities cd. Installation always says "Trusted Platform Module not found" someone at - it the same problem?
Hello
Have you checked the BIOS settings? Maybe the TPM must be enabled first.
-
Hello
TPM is available on the HP 13-c077nr flow model?
Thank you.
Hello
Not as shown:
http://support.HP.com/au-en/document/c04484937
Normally only company machines have TPM, not normal machines, even high-end Envy.
Kind regards.
-
Hello
I mix TRIED TO CONNECT MY BB CLASSIC BB after upgrade to windows 10.
was a mistake to remove and reinstall Office Manager
I have uninstall but could not install again bcs of error
pls advise
The best
Yoni
I managed to install.
now everything is good
THX -
Hello, I have Windows XP Professional on my computer at home and a week ago I noticed a new icon on the screen that says 'New Briefcase (2)' start. I'm not this letter from the computer where I can go and start trying to remove this or that and I would like to know what would happen if I chose to delete it? The other thing that has changed is the color of the background, it used to be the old blue startup screen and now it is white and a box asking if I want to restore my Active desktop. When I pressed yes thinking it would take me back to the old blue screen that nothing happens, so I end up going to the Panel and the opening of the office and when my old screen appears, I grow well and he is back to normal, until the next time that I start. What would cause that new icon to just pop as he did and why the white of the screen with this question? I did something that would cause these changes. Any help would be appreciated and I thank you for your time and your help.
[Moved from comments]
Hello
The new Briefcase (2) is probably empty and may have accidentally created by a right-click on the desktop > New > Briefcase. You can safely remove. It is not necessary.
For the question of Active Desktop, try this...
Right-click on the desktop > properties > Display Properties > Desktop > customize > Web, uncheck whatever the page is listed or add a new Web page and uncheck the box, then OK your way out. That should disable Active Desktop.
Then... Right-click on the desktop > properties > Display Properties > Desktop > select a color.
Don
-
"Rowset cannot be loaded because the stream is invalid" when you use vb6 Windows XP
So try to run the application in VB6 with SP5 runtim in Window XP, I get the error "rowset cannot be loaded because the stream is invalid. In fact, our requirement is VB6 with SP5. I can't fine the SP5 in Microsoft sites that's why I'm running in SP5 runtime. But I get the above error. Please give the solution for this problem
Hi Vincent SubbarayuduMamilla Alaiah,.
The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
MSDN forums
http://social.msdn.Microsoft.com/forums/en/category/VisualBasic
-
First CC - cannot press ok on the Preferences tab after the upgrade
First CC - cannot press ok on the Preferences tab after the upgrade
someone had this problem?
found the solution on another thread
Had a problem with permissions for a folder of Adobe preferences.
name of computer/OS disk name/users/user name/Library/Preferences/Adobe
change folder permissions
-
After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0x8004FE21
Code of Validation caching online: 0x0
Windows product key: *-* - M892G - 84D7W-VYVVB
Windows product key hash: 8URszDmqchXk0nyLWXx2jditWJE =
Windows product ID: 00359-030-0078141-85521
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {656CCD50-41C9-41C3-968E-D29BBD46AA74} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.120330 - 1504
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: 2.0.48.0
OGAExec.exe signed by: Microsoft
OGAAddin.dll signed by: MicrosoftOGA data-->
Office status: 100 authentic
Microsoft Office XP Professional - 100 authentic
OGA Version: Registered, 2.0.48.0
Signed by: Microsoft
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100Other data-->
Office details:{A9BF75C2-FBF3-4795-953B-E259BD0C2131} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 32 *-*-*-*-VYVVB 00359-030-0078141-85521 5 S-1-5-21-1580701254-2691487138-3117158855 HP-Pavilion ,FK484AAR-ABA m9400t American Megatrends Inc.. 5.33 20081107000000.000000 + 0009CE93307018400FA 0409 0409 Eastern Standard Time(GMT-05:00) 0 3 HPQOEM SLIC-CPC 100 100 Microsoft Office XP Professional 10 roTAwuyn2K8JnfnZ5p70qCWUSww = 54186-640-4025656-17423 14 97728824C57890A Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00170-030-007814-01-1033-7600.0000-3102009
Installation ID: 010516027730660442597094592351394511091775644602024082
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: VYVVB
License status: licensed
Remaining Windows rearm count: 5
Trust time: 10-02-2012 17:32:36Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: n/a
Beyond: 0x000000000001EFF0
Event timestamp: 10:1:2012 07:16
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
Altered the file: %systemroot%\system32\sppobjs.dll
Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Altered the file: %systemroot%\system32\sppwinob.dll
Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Altered the file: %systemroot%\system32\drivers\spsys.sys--> HWID data
Current HWID of Hash: LAAAAAEAAAABAAEAAQABAAAAAgABAAEA6GFOQjaxCJyw9OJsCMr4P8RozDE =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-CPC
FACP SLIC-CPC HPQOEM
HPET SLIC-CPC HPQOEM
MCFG SLIC-CPC HPQOEM
LASRYVITRAGE HPQOEM SLIC-CPC
GSCI HPQOEM SLIC-CPC
SLIC SLIC-CPC HPQOEM
SSDT HPQOEM SLIC-CPCHave you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us
----------------------
Have you installed a new hardware or software since you started facing this problem?Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.
What Antivirus utility you installed?
What's your date and time correct?
-
HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10
Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.
Hi @Ron9871,
Welcome to the Forums of HP Support!
I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).
If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.
- Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
- Type the IP address in the browser to bring up the SAP.
- Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
- Select Manual IP.
- Enter your IP address manual (192.168.0.232)
- Enter 255.255.255.0 for the subnet mask, except if it is different.
- Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
- Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
- Click on apply.
Please restart the router, the printer and the computer in this sequence.
If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.
What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)
- Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
- File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.
You can try to change your WSD printer port by a Standard TCP/IP port.
To do this, you will need your current IP address printers. The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.
-
I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found
Hello
I googled this file pofusido.dll and it could be caused by a virus.
I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.
Download and install the free http://www.malwarebytes.org/
Restart the computer and keep pressing F8 to get into safe mode with network connection.
Once you have updated Malwarebytes run and see if it can remove the virus.
So delete all cookies in your internet Explorer.
Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul
-
Windows cannot repair this computer automatically (Vista) after changing the motherboard
After the power outage, my computer crashed (Compaq machine pre-installed). I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.). When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.
Any ideas as to what I should do? I intend to retrieve the HD upgrade to Windows 8.
Thank you
After the power outage, my computer crashed (Compaq machine pre-installed). I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.). When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.
Any ideas as to what I should do? I intend to retrieve the HD upgrade to Windows 8.
Thank you
Clarification:
Windows Vista is preinstalled on this system?
If I read (and cited only) correctly - Yes, which is not going to work. The license for Windows Vista was related to the Compaq system motherboard. If you had that repaired under warranty, HP? Compaq could have helped you. As you have created a new machine (motherboard especially) now, you will need to purchase a new license for Windows Vista or any other operating system of your choice.
You could, I suppose, buy the OEM of Windows 8 version. You will have the same problem later (OEM licenses is related to the first motherboard it is installed and activated with.) -
Took pictures on the raw and cannot burn it to a cd. How can I change the to JPEG in photoshop cs6?
Add to that said Jitendra Khatwani , you can select multiple raw files to open in Photoshop. Once you have done so, Camera Raw in Photoshop plugin is open. In Camera Raw, select all the files and then press Ctrl + S, or Cmd + S and choose JPEG from the options and make any other changes you want. Now all the all selected files will be saved in JPEG format for you when you click Save.
-
Never had this problem until what MS downloaded and installed updates (for Windows7). So I said I'm going to widows 10 because I thought anyway, so I did this - still cannot open a new tab, or by clicking on the tab '+' or 'ctrl + T.
I spent about an hour going by most of the measures that have been provided by the support of Mozilla tech note and it did not help. I'm not going to create a new FF profile.
I restart my PC, nothing helped. I chose "never" (I forgot the exact wording) on all the Plug Ins and then rebooted and this did not help. I have not loaded Extensions.
I installed FF for Windows 10 just after the installation of Windows 10.
I am a user of whether average PC.
Thanks for any help you can give,
Steve V.Dear cor - el,
Now, I'm happy! Thank you very much.
New tab works now. It is because of me running the first program malware that you listed above, Malwarebytes. I am grateful that you suggested it because I would not have thought that that would be the problem (because the problem occurred immediately after a MS Windows7 update.
Anyway, thanks again for sharing your time and skills.,.
Steve V.
-
Hello
I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.
The 'Intermediary' folder is present and rest after a restart, but the extensions do not get installed. They show in the extensions page with the message "will be installed after you restart Firefox" and remain like that, no matter how many times I restart.
Any idea?
Under Firefox 24.0 Windows 8.1
Thank you very much
BDP.S. Just tried to install the add-on "convenience store" before asking the question and I got an error saying that it cannot install because it cannot change the necessary file. (I did manually instead)
I tried to delete the files extensions.* nothing works. However, I deleted the addons.sqlite file and restarted my computer (computer not only Firefox) and that seemed to do the trick. Problem solved.
Thank you for your help, it is appreciated.
Maybe you are looking for
-
MacBook Pro crashed after update to macOS Sierra
After I tried to update my MacBook Pro for macOS Sierra, this screen came: In case you can't read it, it says "apple.com/support-1007F'. After restart my MacBook Pro, he asked for my Wi - Fi connection information, so I typed in it and it showed a lo
-
Of attached Quick Look keeps you from downloading spam?
Hi useful Folk, 'Quick Look' attachments Mail preventing you from downloading spam? There are times when I'm trying to determine if an email with an attachment is legitimate, but I'm afraid of "Quick look" attachment lest it somehow temporarily downl
-
Hello everyone, I know how to create a dll in labview and how to use it. But I need a good document that explains how to handle DLLS with different types of data. Thank you
-
What conditions must exist before that Vista will be puy a computer on standby?
What conditions must exist before Vista will put the computer to sleep? I'm having a horrible time to getting my computers to turn out to fall asleep on their own. Wake-on-Lan is disabled. Power options are: Disable hard drive: neverSleep after 10 m
-
I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer