Cannot print. How to enable the print spooler?

Similar Questions

• How to enable the ReadyBoost feature?

  I would like to know how to enable the ReadyBoost feature.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  I would like to know if it is possible to assign an SSD internal to do this instead of using a USB drive or not.  I tried ReadyBoost option in SSD drive is not available.

  Do you have any suggestions?
  Thanks a lot for your suggestions :>

  Hello

  Sorry, but you cannot use an internal hard drive for ReadyBoost. Indeed, an SSD can not use ReadyBoost.

  This feature can use a USB flash drive external as a hard drive cache to improve the disk read performance.

  More information on the following links.

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  Turn ReadyBoost on or off a storage device:
  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Concerning

• How to enable the CDI an area of weblogic (not IntegratedWeblogicService)

  I created a project with IDC in Jdeveloper 12.1.3 and it works very well in IntegratedWebLogicService. I deploy it as a WAR file to a weblogic domain. However, the jsf pages cannot get the value of beans and just show #{items.smallest} , #{items.biggest}.

  How to enable the CDI in a weblogic domain base?

  Thank you very much.

  CDI is not an option available on Weblogic server or a configurable parameter.

  It is a feature of the Java EE 6 platform and you can not disable/enable the only feature on weblogic server.

  Try it below to solve the problem

  Connect to the stand-alone server administration console and check if libraries necessary dependency for your application is deployed, or the necessary components have been extended during the creation of the field.

  You could quickly check comparing deployments of libraries on both stand-alone and integrated administration console weblogic server.

  Registered the application libraries is also written in the config.xml file, which can also be used to compare.

  It could be useful!

  Thank you

  Vijaya

• Satellite L500 - how to enable the WLAN?

  I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
  I used to market its WIFI by pressing the FN + F8 keys.
  But now I can't on it using the method.
  I downloaded its end drivers.
  In reality its all the function keys do not work.
  Please let me know how to enable the WLAN and function keys.

  Hi kim2kjy,

  You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?

  The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.

  Check this box!

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How to enable the TOC in cp Bill?

  I am a new user to Captivate.

  How to enable the TOC in cp Bill? Please suggest

  Go to option menu project-> Table of Contents-> select Show TOC.

  Table of contents will be activated.

• How to enable the Welcome screen in photoshop cc?

  With photoshop the new se update. The home screen has disappeared and I wanted it back. I found it very useful with some of my drawings. How to enable the Welcome screen?

  And just to clarify: Welcome screen has been replaced by the workspace of departure, completed by the advice that the Welcome screen was (although I admit that's exactly as good).

• How to enable the function keys beats again after the upgrade of the OS?

  How to activate the function of key Beats again after an upgrade of the OS which is Windows 7 Ultimate 32 bit, I use HP Mini 210-4000

  Stealth,

  The combination of bat function keys is

  FN + b

  as stated in your Quick Start Guide

  Chapter 1, Page 2

  The Guide:

  Beats Audio is an improved audio profile that offers a deep, controlled all low by maintaining a
  Crystal clear sound. Beats Audio is enabled by default.
  ▲ To enable or disable the Beats Audio, press fn + b.
  Select Start > Control Panel > hardware and sound > Beats Audio

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  If you are having problems with the audio works as it should, you may have to (re) install the drivers from the website of your laptop.

  There are actually two different models in the category of 210-4000 Mini.

  Start here to the Support and drivers

  • Select the model entry that corresponds to your laptop.
  • Go to Software and Driver Downloads
  • Select your operating system (Windows 7, 32-bit), and then click "Next".
  • Scroll down
  • The Audio driver is the first category...
  • Download the package, pay attention to where it is saved.

  Given that you just upgraded (probably from Vista?), you may need to update some other software too.  Go through the different categories and see if you need / want any of the other packages.  Most of them can be added 'above' of what you already have on the system.  If you must delete something, the program will inform you when you try to install the new version.

  • If you have control of "Admin", we can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  For Audio driver... After you update / install the driver, reboot your computer.  After that, you should have your software Beats back.  If no joy yet, go back and get the software Quick Launch bar of your website (heading Software Solutions) and install it...

  Good luck!

  ----------------------------------------------------------------------------------------------------------

  Click on the star of white Kudos on the left to give Kudos for assistance.

  Please click "accept as Solution" to say the problem is solved.

  Always include: (Computer) product number , printer - model number ,.

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• How to enable the Support of Legacy desktop Z240

  Hello

  Does anyone know how to activate the legacy on Z240 workstation support?

  Under "secure boot configuration" in the BIOS I chose "Legacy Support enable and disable start-up secure", but after I save and reboot, it reverses to 'disable Legacy Support and allow to secure boot.

  Any suggestions please?

  BIOS version is 1.24, which is the last.

  Thank you very much

  I thought about it later.

  When you disable "Secure starting" or any other option in the BIOS security, you will be asked to enter the 4 digits to restart.

  I was typing the 4 digits while having "num lock" so while I thought I was typing the numbers, the BIOS would not accept the changes simply because what I was typing was 'empty '. Make sure you actually see the numbers, you are required to enter the screen.

  

• Satellite A100 - 906 (PSAA9E) how to enable the ahci?

  How to enable ahci on this laptop.
  Debian Lenny

  * lspci: *.
  + 00:1F.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 family) SATA IDE Controller (rev 02) (prog-if 80 [Master]) +.
  + Subsystem "": Toshiba America information systems Device ff10 +.
  + Control: I/o Mem - BusMaster + SpecCycle-MemWINV-VGASnoop-ParErr-Stepping-SERR-FastB2B-DisINTx-+
  + Status: Cap + 66 MHz + UDF - FastB2B + ParErr - DEVSEL = medium > TAbort - < TAbort - < MAbort > - SERR - < PERR-INTx-+
  + Latency: 0 +.
  + Interruption: axis B routed to IRQ 19 +.
  + Region 0: Ports i/o to 01f0 [size = 8] +.
  + Region 1: Ports i/o 03f4 [size = 1] +.
  + Region 2: Ports i/o to 0170 [size = 8] +.
  + Zone 3: Ports i/o to 0374 [size = 1] +.
  + Region 4: Ports i/o to b 18-0 [size = 16] +.
  + Features: [70] power management version 2 +.
  + Flags: PMEClk - DSI-D1-D2-AuxCurrent = 0mA SME (D0, D1 - D2-, + D3hot, D3cold-) +.
  + Status: SMB-Enable-DSel D0 = 0 = 0 SME DScale-+.
  + Kernel driver used: ata_piix +.
  + Kernel modules: ide-pci-generic, ata_piix, ata_generic +.

  * cat/var/log/dmesg | grep NCQ: *.
  + ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) +.

  In the BIOS there is no parameter 'AHCI' or 'Native Mode '.

  Who is to blame and what to do, gentlemen?

  Hello

  The AHCI is enabled if there is no option in the BIOS.
  The controller AHCI (SATA) HARD drive need a driver SATA to install an OS system on the HARD drive.

  I put t know what it takes to Linux but on Windows operating system, you must install the SATA driver, which is part of the Intel storage Manger.

• Qosmio G20 - how to enable the function keys

  Can someone tell me how to activate the function keys? I seem to be entirely invalid.
  Thank you
  Mike

  Hello

  In my opinion one of the important gift of drivers or utilities work and, therefore, you cannot use the FN keys.

  If your have installed XP on your test of the G20 to refresh the Toshiba common Modules.
  It is an essential tool that controls the FN keys.

  The common Modules can be downloaded from the page of European driver of Toshiba.

  Check it out.

• Satellite P750 - 02K - how to enable the wireless interface?

  Hello

  I just bought a new laptop Satellite P750 / 02K with Windows 7 64 bit. How can I enable the wireless interface?

  I tried the Fn + F8, but it says it all, this is the 'wireless communication is disabled. Please activate the wireless communication switch. There is no switch that I see. The device driver is enabled and active. I even tried to reinstall the driver. The user manual makes no reference to a process physical either pass. I checked the BIOS but see no setting for all the wireless settings. I tried to restart the flash without result map.

  Any suggestions? Thank you.

  Hey Buddy,

  I Don t Satellite P750 in front of me, but the wireless network card is in the Device Manager?

  On Satellite P750, there is a tactile button between the screen and the keyboard to turn the WLAN function. The second button on the left (symbol of the antenna), you need to press to activate the WLAN.

  Also, check the BIOS. As I know most notebook contains an option for the WLAN that must be set to active.

• How to enable the AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook

  Hello

  I upgraded my hard drive to an SSD and it's done. Laptop works very well.  The Samsung SSD software installed and it says that I need to enable AHCI to get the SSD running at full capacity.

  I searched the BIOS and don't see anywhere to change that.  I then went to the Device Manager in Windows 8.1and I don't see any ATA/SATA controller.  All I see is a RAID controller. RAID controller in a laptop?

  Can someone tell me how to activate the AHCI?

  Thank you.

  

  Hello:

  Because your laptop is a portable consumer there is no way to change the BIOS to AHCI setting.

  The BIOS is set by default for RAID on your model series because some models come with one of these drives covering with a SSD and for a technical reason, that those who must be configured in RAID 0 mode so that Setup work right.

  It is my understanding that if you install the latest driver Intel RST, which is supposed to support TRIM SSD starting with the Intel 7 series chipset, and yours has series 8, so he must have full support for one SSD usage even in RAID mode.