Satellite A100 - 906 (PSAA9E) how to enable the ahci?

Similar Questions

• Satellite A100-237 / PSAA9 - how to enable AHCI (SATA Native mode)?

  Hello

  I have the Satellite A100 - 237 (PSAA9) and I would like to activate the AHCI (SATA Native mode). But in the BIOS there is no settings as AHCI or SATA mode.

  Is it possible to enable it in any other way (hidden fixing, utility sw)? Or only new special BIOS for this update (I have the latest 5.90) can solve this problem?

  Thank you for the answers.

  No response for the last 5 days. Of course, there is no special hidden parameter or BIOS. ;)

  As far as I know that there is no hidden settings and also no special BIOS. If something like that exists perhaps for technicians and non-public use.

• Satellite A100-906: Express player media use the reinstallation of the operating system

  Hello

  I use a Toshiba Satellite A100-906. I did NOT know about what express Media Player recovery cd's and I've never used it. But now I want to know what's the point of use.

  In any case I had to format my laptop and I have used the recovery cd. So now I've read that if I want to run the express media player I must first of all, insert the express media player cd stop button of my laptop and then use cd/dvd to start it.

  The problem is that I find in win xp with a Windows Media Player. Something go wrong with the format (using the recovery cd)? I had to first install the express media player? and then format and reinstall xp?

  If that's the problem, I, at this stage, to be able to install express media player without losing my data? I expect an answer. I hope you'll forgive my ignorance :).

  Best regards
  Harris

  P.S. when I boot from the media player recovery cd express I get three options 1) crash installation 2) uninstall 3) delete all partitions. So did I express media player installed?

  Hello

  So you're a bit confused. Am I wrong?
  If you want to start the Express media player you n t need to insert the CD of express media player!
  Express media player must be installed on the HARD drive!

  You have recovered the laptop with your recovery CD Toshiba but didn't install the Express media player since the EMP CD!
  This is false.

  Usually the Media Express Recovery CD drive must be run before performing the recovery from the recovery DVD-ROM products.
  Cannot install the Express media player after using the Toshiba Recovery CD!

  So first to run the CD of Express media player and then run the restore CD!

  If you wish, you can consult this useful document of Toshiba providing education
  How to find a laptop Expert Mode with 2 Partitions and Express Media Player?
  http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htm

  hope I could help a little

• Satellite A100 - 153 (PSAA9E) - how to update display drivers?

  Hello!
  I need a current display for my ATI Radeon Mobility X 1600 driver in my laptop Toshiba Satellite A100-153 PSAA9E.

  I can not install the Catalyst Control Center (and therefore the latest driver). It says to me "this driver is not compatible with your system. Contact the manufacturer.
  In the magnificent... download section are the only drivers of 2006 for my X 1600. Anyone know how I can install current drivers? Is it possible to avoid the 'blocking of Toshiba' for display drivers?

  Thanks in advance

  Hey Buddy!

  The display on the original ATI site driver is not designed for graphics cards for laptop and so that you can install t. In addition he doesn t have an overheating protection and therefore can damage your graphics card! It s on your own risk!
  If you want the ATI driver, you must use Mobility Modder. Then you can install it, but don t forget s about your risks and perils and you will lose the warranty.

  The drivers from the Web from Toshiba site definitely work for your laptop then why you want to install a different driver?

  Good luck!

• How to enable the AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook

  Hello

  I upgraded my hard drive to an SSD and it's done. Laptop works very well.  The Samsung SSD software installed and it says that I need to enable AHCI to get the SSD running at full capacity.

  I searched the BIOS and don't see anywhere to change that.  I then went to the Device Manager in Windows 8.1and I don't see any ATA/SATA controller.  All I see is a RAID controller. RAID controller in a laptop?

  Can someone tell me how to activate the AHCI?

  Thank you.

  

  Hello:

  Because your laptop is a portable consumer there is no way to change the BIOS to AHCI setting.

  The BIOS is set by default for RAID on your model series because some models come with one of these drives covering with a SSD and for a technical reason, that those who must be configured in RAID 0 mode so that Setup work right.

  It is my understanding that if you install the latest driver Intel RST, which is supposed to support TRIM SSD starting with the Intel 7 series chipset, and yours has series 8, so he must have full support for one SSD usage even in RAID mode.

• How to enable the AHCI for SSD on M6-1010TX laptop computer HP

  HELO

  Have tried to install an EVO of 840 Samsung 240 GB SSD on my laptop of M6-1010TX with WIN7x64 i5/4 GB and running.

  The SSD seems to work OK, but I when I run Samsung magician this is a warning that it must be set to AHCI.

  Also, most of the menu items are grayed out and unavailable in Wizard, so I can't see or adjust all parameters. I don't even know if the TRIM work.

  There is no possibility of setting to AHCI in the BIOS. (In fact there is no provision for seting pretty much anything in the BIOS)

  I've seen a remedy to a similar problem on this forum under 'How to enable AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook' which offers to upgrade to the latest version of Intel RST, which is supposed to give favor SSD attitude to go with the 7 series Intel chipset.

  I already have the updated HP version of installed RST (2012-05-04 11.1.0.1006), but the Intel site has versions up to 13.1.0.1058 in date 27-05-2014.

  Anyone know if these later versions of Intel are safe to install?

  PS - I 840 Samsung SSD EVO running on 2 HP ProBooks's a little older, and they run like lightning.

  A simple setting in the BIOS to enable the AHCI is available on these. Why not in the new M6?

  Thank you

  OK Hüffer---> we have a update

  I had the opportunity to re - install the SSD drive this morning.

  It seems that you were mostly correct, but there is also a bit of a conflict between the Samsung software and HP hardware.

  When I re-installed this time I connected the SSD in USB BEFORE installing the software (Samsung instructions say to connect AFTER insalling software). This has resulted in much better recognition of the SSD and all the options are now available in Sasung magician.

  EXCEPT - 1. He always warns AHCI mode being "Deactivated (IDE or RAID).

  2. it does not recognize the SATA 3 Interface

  HOWEVER - it seems to work quite fantasmagorically FAAAAAAST

  Samsung Benchmark gives random read/write speeds about 30% above their maximum rate quotes

  These reference speeds are about double what I get from the above, 2 HP ProBooks who have SATA 2 interfaces, so it seems that the SATA3 interface actually works correctly.

  I am now very happy with this performance (but I wish that AHCI warnings were not there)

  So the secret seems to be to connect the SSD drive first and do believe not all alerts when the evidence says it actually works OK.

  Thank you once again to Hüffer,

  Hawkeye

• How to enable the AHCI in HP pavilion dv6700t?

  Hello

  I was wondering if it was possible to enable the AHCI on my pavilion dv6700t.  Chipset intel is a much older model, P965 of 2008 but still works fine.

  In Manager devices, under IDE ATA/ATAPI controllers, he says that the ich8m-e/m sata AHCI is enabled.  It is reasonable to assume that AHCI is therefore already activated? I have no way to do it via the BIOS, which limited configuration options. It's the PhoenixBIOS l58.

  I am considering installing a SSD as my boot (and only) and I read that the AHCI is important for functions such as the NCQ, etc..

  Thanks for your wisdom!

  Jason

  Hi, Jason:

  Yes, that's correct.

  AHCI is enabled by default.

  This is why everyone struggled to install XP on laptops. AHCI drivers must be loaded before installing XP at the prompt F6 or slipstreamed into a copy of the XP Setup disk.

  Now... you can do whatever you want, but I don't know of anyone on this forum who has installed an SSD in any model dv6000/dv9000 Series notebook.

  If you know it's possible, thanks for posting back after installing a SSD and let us know how you did.

  Paul

• Satellite Pro M70-220: how to enable the AGP?

  Hi all!
  I recently bought a toshiba M70-220, I discovered that the GPA or accelerated graphics port is not available, I don't know if it is preinstalled, so I would ask anyone there for please help me with what I have to do to enable the AGP, I appreciate all the efforts of everyone. Help, please. Thank you very much.

  Sam

  Hello

  If you have an Intel graphics card, then I recommend to check OpenGL settings in the properties of the graphics card.
  In addition, you can try to start the dxdiag and you will find detailed information. There you should find the AGP texture acceleration option.

• Satellite P300D-10U - how to enable the AHCI controller in the Bios

  I have toshiba satellite P300D-10U with windows vista 32-bit, disc ssd drive 2nd hard drive
  and I can't do IT controller SATA AHCI in the bios.

  http://www.Toshiba.EU/discontinued-products/satellite-P300D-10U/

  What can I do?
  install the new windows 7 32 / 64-bit and updated the bios for this maybe windows I can ON AHCI Controller in bios

  This bios has the ability to run on AHCI?

  Thanks for replying,
  Thank you.

  BIOS of the screen:
  http://ImageShack.com/a/img745/6711/ez591J.gif
  http://ImageShack.com/a/img901/7149/SRjUz3.gif
  http://ImageShack.com/a/img743/7539/8Pt5ro.gif
  http://ImageShack.com/a/img901/8573/iPfiOZ.gif
  http://ImageShack.com/a/img746/7872/T3nBfa.gif

  SSD of the screen
  http://ImageShack.com/a/img908/4148/ZjaDr1.gif
  http://ImageShack.com/a/img661/9900/846hMR.gif

  I changed the value to 0
  HKEY_LOCAL_MACHINE es\Msahci

  I install ATi SATA2 RAID (pilot preinstallation)
  http://www.gigabyte.com/products/product-page.aspx?pid=2500#DL

  CD..

  To my knowledge, the Satellite P300 series BIOS doesn t contain the ability to switch the AHCI compatible mode.

  I don t think that even after updating the BIOS such option would be available in the BIOS.

  I see on the first screenshot of the BIOS, the SSD drive is connected to the second controller.
  I recommend you connect the SSD to the first controller (instead of the HARD disk).
  Maybe then you could get better performance.

  Just for the note: portable computers with a graphics card ATI supports the AMD chipset, and in this case the ATI graphics card driver contains the SATA driver files.

  However, I guess the HARD disk controller specification allows the use of better performance of SSD drive.

• How to enable the AHCI for HP Envy M6 1205dx.

  I just bought a Samsung 250 GB SSD EVO. One of the important things to do is to activate the AHCI. I can't find this option in my BIOS. How can I activate it?

  Hello

  This is the default option in the BIOS.

  Kind regards.

• Satellite P300 - 1 7 - How to enable the project?

  I have the Satellite P300 - 1 7 with wifi link 5100. His work just to 54 Mbps. I don't have 300 Mbps connection. The distance is 1 to 3 metres.
  Why does only not with n-draft?

  -Operating system is Windows Vista 32 bit
  -Router W - lan is Vodafone Easybox A 602---> (identification of the software have n-project)
  -wifi link 5100---> (identification of the software do NOT have n-draft) why?

  These products have the latest driver updates.

  Help, please...

  Hello

  What happens if you choose only the draft N speed in Device Manager? So go in Device Manager, select the wireless network adapter and click Properties. Here, you can change how fast WLAN should be used. Here, you define project N only!
  Also, make sure that the WLAN router uses N project only, too!

  Finally and most importantly make sure that this latest driver WLAN and BIOS version is installed. Both can be downloaded from the Web from Toshiba site.

• Satellite A100 - 906 PSAA9E: I can not find drivers for Windows 2003 Server R2

  I found and installed some drivers of http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=RU

  Look at the screenshots of my computer, please.
  Window "Device Manager":
  http://www.DISA.HO.com.UA/Toshiba/1.gif
  http://www.DISA.HO.com.UA/Toshiba/2.gif
  http://www.DISA.HO.com.UA/Toshiba/3-1.gif
  http://www.DISA.HO.com.UA/Toshiba/3-2.gif
  http://www.DISA.HO.com.UA/Toshiba/4-1.gif
  http://www.DISA.HO.com.UA/Toshiba/4-2.gif
  http://www.DISA.HO.com.UA/Toshiba/5-1.gif
  http://www.DISA.HO.com.UA/Toshiba/5-2.gif
  How can I solve this problem?

  PS: sound does not work

  Hello

  As mentioned above, you will not find the Toshiba drivers designed for Windows 2003 R2 server.
  But don t worry, and don t give up.
  Windows XP drivers must simply be compatible and you should be able to install the Xp drivers on the Win2003 Server operating system.

  Good luck

• Satellite A100 - 237 (PSAA9E) - unable to install the ATI driver

  I installed Windows 7 32 bit ulitmate. When I click to "tuninstall.exe", nothing happens (givent pilot error but do not work). Help me please?

  and few other pilots gives the same error. :(son exp.)

  Hello

  Which driver are you trying to install and why?
  I assume you mean the uninstall.exe file... Well, you know that this begins the uninstall process? You should run the file setup.exe or install.exe to install the driver or use the Device Manager installation wizard.

  In addition, it would be interesting to know where you downloaded all the drivers

• Satellite A100 - 166 PSAA9E will not charge the battery

  Hello

  My laptop will not charge the battery.
  Although Windows Xp recognize the battery and says loading, the battery does not charge.
  I tried with a spare battery that I thought that the battery was faulty, with the same results.

  Strange thing is, when I turn off the laptop the power led remains lit and the blue, even without the power supply attached therefore discharge the battery.
  The battery led is still orange but not load!

  What is the problem with the laptop?
  Thank you

  Hello

  Generally, there are three possibilities;
  (1) the adapter is faulty
  (2) the battery is faulty
  (3) the logbooks electronic malfunctions (ESF)

  So now he of needed to check all these steps to find the fault.
  You said you've tried different batteries and AC adapter works too.
  So it is possible that there is something wrong with the electronic power supply

  In this case there is not much to do to contact the ASP in your country. Technicians should check the portable and should run diagnostics tests

  I recommend contacting the guys and ask for more details and manipulation still good luck and happy new year.

• Satellite A100-906 each time after power button

  Satellite A100-906 each time after pressing the button will stop exactly in 1 minute.
  And in Setup mode too.

  What it means?

  Hello

  Are you sure that the laptop is connected correctly to the mains?
  Is the battery ok?

  My battery is very old and the laptop runs only 2 min with battery.
  So I have to use the laptop still plugged into the mains.