Cannot print to a network via vpn printer

Installed an EnGenius ESR750H router and configure the L2TP VPN server and Win 7 SP1 VPN client. The client connects and implements the VPN.

I can access the drives mapped to WHS v1 (Windows Home Server) and NAS (Network attached storage() and I can access the NAS login screen.

I can't access screen for the old DLink DIR-655 Router now used as a WAP only [wireless access point] connection.

I can't print the two printers on network at the office. LaserJets HP4000 & HP4050 with SNMP disabled in the configuration of printer Win7 - if on, they show offline.

And I can't RDC (Remote Desktop connection) the ESM.

A computer on the LAN Office can do anything, so everything works.

Some time back, I have all work by the VPN ESR750H - all this - and I was so happy to finally access. At that time there I had not yet removed on the WHS VPN configuration.

Then the next day, a fool to UNRWA [the boss] decided to move things on a network segment and everything, including internet access, went to-well, you know where. During the frenetic fray next I took the VPN of the WHS, but left the remote control to connect to. More I have him help locate the bad wiring and bad switch causing the problem.

I could not even get it all back to what I had it one evening. There must be something stupid.

The DRC to the WHS says the server error is not on, not available on the network, or is not remote connect lit, but the boss can rdc to the MSS on the local network.

Printers and the DIR-655 all come with the same message of troubleshooting when I go to IP addresses through the browser with the connected VPN.

(device) is detected and online but does not - does not not to connections on port 80, possibly firewall or do security policy issues - no problems with the firewall on my computer.

I tried port forwarding 80 printing - no joy.

Thanks in advance.

Bob

Hello Rafisher,

Thanks for posting the question on the Microsoft Community.

The question you posted would be better suited in TechNet community support. I suggest you to check with TechNet support to solve the problem.

http://social.technet.Microsoft.com/forums/en-us/newThread

I hope that helps you find the solution for your problem. If you have other problems with Windows in the future, please post in the Windows community. We would be happy to help you.

Tags: Windows

Similar Questions

Customer remote cannot access the server LAN via VPN

Hi friends,

I'm a new palyer in ASA.

My business is small. We need to the LAN via VPN remote client access server.

I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.

Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.

Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.

Who can help me?

Thank you very much.

The following configuration:

ASA Version 7.0(7)
!
hostname VPNhost
names
dns-guard
!
interface Ethernet0/0
nameif outside
security-level 10
ip address 221.122.96.51 255.255.255.240
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.42.199 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
!
ftp mode passive
dns domain-lookup inside
access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
access-list allow_PING extended permit icmp any any inactive
access-list Internet extended permit ip host 221.122.96.51 any inactive
access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool testpool 192.168.43.10-192.168.43.20

arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list VPN
nat (inside) 1 access-list PAT_acl
route outside 0.0.0.0 0.0.0.0 221.122.96.49 10

username testuser password 123
aaa authentication ssh console LOCAL
aaa local authentication attempts max-fail 3

no sysopt connection permit-ipsec
crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
isakmp enable outside
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption des
isakmp policy 1 hash md5
isakmp policy 1 group 2
isakmp policy 1 lifetime 86400
isakmp nat-traversal 3600
tunnel-group testgroup type ipsec-ra
tunnel-group testgroup general-attributes
address-pool testpool
tunnel-group testgroup ipsec-attributes
pre-shared-key *
telnet timeout 5

ssh timeout 10
console timeout 0

: end

Topology as follows:

Hello

Configure the split for the VPN tunneling.

Create the access list that defines the network behind the ASA.

ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0

Mode of configuration of group policy for the policy you want to change.

ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#

Specify the policy to split tunnel. In this case, the policy is tunnelspecified.
```
ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified 
```

Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.

ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List

Type this command:

ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes

Associate the group with the tunnel group policy

ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn

Leave the two configuration modes.

ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#

Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.

Kind regards
Abhishek Purohit
CCIE-S-35269

Cannot access remote network via VPN

Hello

I'm trying to set up a router vpn access to my office network. The router is connected to the Internet through using pppoe vdsl.
There is also a public oriented Web server in the office which must be accessible.

I can access the Web server from the Internet and the vpn connects successfully. I can also ping the LAN Gateway, however, I can't access all the local machines.

I'm quite puzzled as to why it does not work. Please could someone help.

The results of tests and the router configuration are listed below. Please let me know if you need additional information.

Thank you and best regards,
Simon

1. routing on the router table
Router #sh ip route
Gateway of last resort is ggg.hhh.125.34 to network 0.0.0.0
xxx.yyy.zzz.0/29 is divided into subnets, subnets 1
C XXX.yyy.zzz.192 is directly connected, Vlan10
GGG.hhh.125.0/32 is divided into subnets, subnets 1
C GGG.HHH.125.34 is directly connected, Dialer0
172.16.0.0/32 is divided into subnets, subnets 1
S 172.16.100.50 [1/0] via mmm.nnn.ppp.sss
S * 0.0.0.0/0 [1/0] via ggg.hhh.125.34

2. ping PC remotely (172.16.100.50) local GW (172.16.100.1) successful
> ping 172.16.100.1
Ping 172.16.100.1 with 32 bytes of data:
Response to 172.16.100.1: bytes = 32 time = 24ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 11ms TTL = 255

3. ping PC remotely (172.16.100.50) to the local server (172.16.100.10) failure
> ping 172.16.100.10
Ping 172.16.100.10 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

4. ping the router to the successful local server
router #ping 172.16.100.10
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 172.16.100.10, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 ms

5 see the version
Cisco IOS software, software of C181X (C181X-ADVIPSERVICESK9-M), Version 12.4 (15) T1, VERSION of the SOFTWARE (fc2)
ROM: System Bootstrap, Version 12.3 YH6 (8r), RELEASE SOFTWARE (fc1)
the availability of router is 1 hour, 9 minutes
System image file is "flash: c181x-advipservicesk9 - mz.124 - 15.T1.bin".
Cisco 1812-J (MPC8500) processor (revision 0 x 300) with 118784K / 12288K bytes of memory.
10 FastEthernet interfaces
1 ISDN basic rate interface
Configuration register is 0 x 2102

6. router Config
AAA authentication login default local
connection of local AAA VPN authentication.
AAA authorization exec default local
local authorization AAA VPN network
!
!
AAA - the id of the joint session
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto ASI_Group
key mykey
DNS aaa.bbb.cccc.ddd
domain mydomain.com
pool VPN_Pool
ACL VPN_ACL
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac TS1
!
crypto dynamic-map 10 DYNMAP
game of transformation-TS1
market arriere-route
!
!
list of authentication of VPN client VPN crypto card
card crypto VPN VPN isakmp authorization list
crypto map VPN client configuration address respond
card crypto 10 VPN ipsec-isakmp dynamic DYNMAP
!
!
!
IP cef
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
username admin privilege 15 password mypassword
Archives
The config log
hidekeys
!
!
!
!
!
interface FastEthernet0
WAN description
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
automatic duplex
automatic speed
PPPoE enable global group
PPPoE-client dial-pool-number 1
!
interface FastEthernet2
Description Public_LAN_Interface
switchport access vlan 10
full duplex
Speed 100
!
FastEthernet6 interface
Description Private_LAN_Interface
switchport access vlan 100
full duplex
Speed 100
!
interface Vlan1
no ip address
!
interface Vlan10
Public description
IP address xxx.yyy.zzz.193 255.255.255.248
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
!
interface Vlan100
172.16.100.1 IP address 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
!
interface Dialer0
IP unnumbered Vlan10
no ip unreachable
IP mtu 1452
IP virtual-reassembly
encapsulation ppp
no ip mroute-cache
Dialer pool 1
Dialer-Group 1
Authentication callin PPP chap Protocol
PPP chap hostname myhostname
PPP chap password mychappassword
PPP ipcp dns request accept
failure to track PPP ipcp
PPP ipcp address accept
VPN crypto card
!
IP pool local VPN_Pool 172.16.100.50 172.16.100.60
!
!
no ip address of the http server
no ip http secure server
!
VPN_ACL extended IP access list
IP 172.16.100.0 allow 0.0.0.255 any
!
Dialer-list 1 ip protocol allow
not run cdp
!
!

Simon,

Basically when you connect through a VPN Client PC routing table is updated automatically as soon as the connection is established. If you do not need to manually add routes. You can check this by doing a "route print" once you are connected.

Ideally, you need to put your pool of VPN on subnet that does not exist on your physical network, the router would be to route traffic between the IP pool and internal subnet.

Now, you said that you have a web server with a public IP address that you need to access through the VPN, that host also as a private IP addresses on the 172.16.100.0? If it isn't then the ACL that I proposed should work. If she only has a public IP then your ACL VPN address must have something like

IP 172.16.100.0 allow 0.0.0.255 192.168.100.0 0.0.0.255

219.xxx.yyy.192 ip 0.0.0.7 permit 192.168.100.0 0.0.0.255

Who says the router and the client to encrypt all traffic between the subnets behind your router and your VPN pool.

I hope this helps.

Luis Raga

Cannot ping inner network via VPN site-2-site

I have the following Setup of the site 2 site VPN.

The pain I feel is host 172.168.88.3 in site A is not able to ping 172.168.200.3 in site B and vice versa. Think I've added static routes and lists ACLs correctly on 3560 switches (acting as an access point) and the two PIX to access internal networks. 172.168.9.3 host can ping 172.168.200.3 very well. All advice is appreciated.

Thank you very much.

My configs are as follows:

PIX HAS

8.0 (3) version PIX

!

PIX - A host name

activate u18hqwudty78klk9s encrypted password

names of

!

interface Ethernet0

Speed 100

full duplex

nameif outside

security-level 0

IP address x.x.x.250 255.255.255.240

!

interface Ethernet1

nameif inside

security-level 100

IP 172.168.9.1 255.255.255.0

!

uh78mklh78yMs encrypted passwd

connection of the banner it is a private network. Unauthorized access is prohibited!

Banner motd this is a private network. Unauthorized access is prohibited!

passive FTP mode

clock timezone GMT/UTC 0

summer time clock GMT/BST recurring 1 Sun Mar 01:00 last Sun Oct 02:00

DNS domain-lookup outside

DNS server-group Ext_DNS

Server name 82.72.6.57

Server name 63.73.82.242

the LOCAL_LAN object-group network

object-network 172.168.9.0 255.255.255.0

object-network 172.168.88.0 255.255.255.0

Internet_Services tcp service object-group

port-object eq www

area of port-object eq

EQ object of the https port

port-object eq ftp

EQ object of port 8080

EQ port ssh object

port-object eq telnet

the WAN_Network object-group network

object-network 172.168.200.0 255.255.255.0

ACLOUT list extended access allowed object-group LOCAL_LAN udp any eq log field

ACLOUT list extended access allow icmp object-group LOCAL_LAN no matter what paper

ACLOUT list extended access permitted tcp object-group LOCAL_LAN connect to any object-group Internet_Services

Access extensive list ip 172.168.88.0 ACLOUT allow 255.255.255.0 172.168.200.0 255.255.255.0 connect

access-list extended ACLIN all permit icmp any what newspaper echo-reply

access-list extended ACLIN all permit icmp any how inaccessible journal

access-list extended ACLIN allowed icmp no matter what newspaper has exceeded the time

IP 172.168.200.0 allow Access - list extended ACLIN 255.255.255.0 172.168.9.0 255.255.255.0 connect

standard access list split_tunnel_list allow 172.168.9.0 255.255.255.0

Access log list split_tunnel_list note LOCAL_LAN

access-list extended SHEEP allowed ip object-group LOCAL_LAN 172.168.100.0 255.255.255.0 connect

access extensive list ip 172.168.9.0 inside_nat0_outbound allow 255.255.255.0 172.168.200.0 255.255.255.0 connect

access extensive list ip 172.168.9.0 outside_cryptomap_20 allow 255.255.255.0 172.168.200.0 255.255.255.0 connect

pager lines 24

Enable logging

logging buffered information

logging trap information

host of logging inside the 172.168.88.3

Outside 1500 MTU

Within 1500 MTU

IP local pool testvpn 172.168.100.1 - 192.168.100.99

no failover

ICMP unreachable rate-limit 1 burst-size 1

ASDM image Flash: / pdm

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Access-group ACLIN in interface outside

ACLOUT access to the interface inside group

Route outside 0.0.0.0 0.0.0.0 x.x.x.45 1

Route inside 172.168.88.0 255.255.255.0 172.168.88.254 1

Route inside 172.168.199.0 255.255.255.0 172.168.199.254 1

Route outside 172.168.200.0 255.255.255.0 172.168.9.1 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout, uauth 0:05:00 absolute

dynamic-access-policy-registration DfltAccessPolicy

Enable http server

http 172.168.9.1 255.255.255.255 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-3des esp-md5-hmac Set_1

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto dynamic-map outside_dyn_map 1 set of transformation-Set_1

Crypto dynamic-map outside_dyn_map 1 the value reverse-road

outside_map 1 card crypto ipsec-isakmp dynamic outside_dyn_map

card crypto outside_map 20 match address outside_cryptomap_20

card crypto outside_map 20 peers set x.x.x.253

outside_map crypto 20 card value transform-set ESP-AES-256-SHA

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 1

preshared authentication

3des encryption

md5 hash

Group 2

life 86400

crypto ISAKMP policy 10

preshared authentication

aes-256 encryption

sha hash

Group 5

life 86400

No encryption isakmp nat-traversal

Telnet 0.0.0.0 0.0.0.0 inside

Telnet timeout 5

SSH timeout 5

Console timeout 0

a basic threat threat detection

Statistics-list of access threat detection

NTP server 130.88.203.12 prefer external source

internal testvpn group policy

attributes of the strategy of group testvpn

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list split_tunnel_list

Viv ZdlkjGlOTGf7dqdb encrypted user name password

type tunnel-group testvpn remote access

tunnel-group testvpn General-attributes

address testvpn pool

Group Policy - by default-testvpn

testvpn group of tunnel ipsec-attributes

pre-shared-key *.

tunnel-group x.x.x.253 type ipsec-l2l

x.x.x.253 group of tunnel ipsec-attributes

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

inspect the icmp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:bb6ead3350227b3745c14b9ba340b84a

: end

B PIX

8.0 (3) version PIX

!

hostname PIX - B

enable password ul; encrypted jk89A89hNC0Ms

names of

!

interface Ethernet0

Speed 100

full duplex

nameif outside

security-level 0

IP address x.x.x.253 255.255.255.240

!

interface Ethernet1

nameif inside

security-level 100

IP 172.168.200.1 255.255.255.0

!

interface Ethernet2

Shutdown

No nameif

no level of security

no ip address

!

2ljio897hFB.88fU encrypted passwd

Banner motd this is a private network. Unauthorized access is prohibited!

passive FTP mode

DNS domain-lookup outside

DNS server-group Ext_DNS

Server name x.x.x.57

Server name x.x.x.242

the LOCAL_LAN object-group network

object-network 172.168.200.0 255.255.255.0

Internet_Services tcp service object-group

port-object eq www

area of port-object eq

EQ object of the https port

port-object eq ftp

EQ object of port 8080

the WAN_Network object-group network

networks WAN Description

object-network 172.168.88.0 255.255.255.0

ACLOUT list extended access allowed object-group LOCAL_LAN udp any eq field

ACLOUT list extended access allow icmp object-group LOCAL_LAN all

ACLOUT list extended access permitted tcp object-group LOCAL_LAN any Internet_Services object-group

access-list extended ACLIN allow all unreachable icmp

access-list extended ACLIN permit icmp any one time exceed

access-list extended ACLIN permit icmp any any echo response

IP 172.168.88.0 allow Access - list extended ACLIN 255.255.255.0 172.168.200.0 255.255.255.0

IP 172.168.9.0 allow Access - list extended ACLIN 255.255.255.0 172.168.200.0 255.255.255.0

IP 172.168.199.0 allow Access - list extended ACLIN 255.255.255.0 172.168.200.0 255.255.255.0

access extensive list ip 172.168.200.0 inside_nat0_outbound allow 255.255.255.0 172.168.9.0 255.255.255.0

access extensive list ip 172.168.200.0 outside_cryptomap_20 allow 255.255.255.0 172.168.9.0 255.255.255.0

pager lines 24

Enable logging

monitor debug logging

debug logging in buffered memory

logging trap information

Outside 1500 MTU

Within 1500 MTU

no failover

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Access-group ACLIN in interface outside

ACLOUT access to the interface inside group

Route outside 0.0.0.0 0.0.0.0 x.x.x.253 1

Route outside 172.168.88.0 255.255.255.0 172.168.200.1 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout, uauth 0:05:00 absolute

dynamic-access-policy-registration DfltAccessPolicy

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

card crypto outside_map 20 match address outside_cryptomap_20

card crypto outside_map 20 peers set x.x.x.250

outside_map crypto 20 card value transform-set ESP-AES-256-SHA

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

aes-256 encryption

sha hash

Group 5

life 86400

No encryption isakmp nat-traversal

Telnet timeout 5

SSH timeout 5

Console timeout 0

management-access inside

a basic threat threat detection

Statistics-list of access threat detection

tunnel-group x.x.x.250 type ipsec-l2l

x.x.x.250 Group of tunnel ipsec-attributes

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

inspect the icmp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:ccb8392ce529a21c071b85d9afcfdb30

: end

3560 G/W

version 12.2

no service button

horodateurs service debug uptime

Log service timestamps uptime

no password encryption service

!

hostname 3560_GW

!

enable secret 5 $1$ cOB4$ Uklj8978/jgWv? TSSP

!

No aaa new-model

mtu 1500 routing system

IP subnet zero

IP routing

!

!

!

!

No file verify auto

pvst spanning-tree mode

spanning tree extend id-system

!

internal allocation policy of VLAN ascendant

!

interface GigabitEthernet0/1

!

interface GigabitEthernet0/2

uplink Description to Cisco_ASA

switchport access vlan 9

!

interface GigabitEthernet0/3

!

interface GigabitEthernet0/4

!

interface GigabitEthernet0/5

!

interface GigabitEthernet0/6

!

interface GigabitEthernet0/7

!

interface GigabitEthernet0/8

!

interface GigabitEthernet0/9

!

interface GigabitEthernet0/10

!

interface GigabitEthernet0/11

!

interface GigabitEthernet0/12

!

interface GigabitEthernet0/13

!

interface GigabitEthernet0/14

!

interface GigabitEthernet0/15

!

interface GigabitEthernet0/6

!

interface GigabitEthernet0/7

!

interface GigabitEthernet0/8

!

interface GigabitEthernet0/9

!

interface GigabitEthernet0/10

!

interface GigabitEthernet0/11

!

interface GigabitEthernet0/12

!

interface GigabitEthernet0/13

!

interface GigabitEthernet0/14

!

interface GigabitEthernet0/15

!

interface GigabitEthernet0/16

!

interface GigabitEthernet0/17

!

interface GigabitEthernet0/18

!

interface GigabitEthernet0/19

!

interface GigabitEthernet0/20

!

interface GigabitEthernet0/21

!

interface GigabitEthernet0/22

!

interface GigabitEthernet0/23

switchport access vlan 88

switchport mode access

spanning tree portfast

!

interface GigabitEthernet0/24

switchport access vlan 9

switchport mode access

spanning tree portfast

!

interface GigabitEthernet0/25

trunk of the description and the port of A_2950_88 1

switchport trunk encapsulation dot1q

!

interface GigabitEthernet0/26

!

interface GigabitEthernet0/27

trunk of the description and the port of A_2950_112 1

switchport trunk encapsulation dot1q

Shutdown

!

interface GigabitEthernet0/28

!

interface Vlan1

no ip address

Shutdown

!

interface Vlan9

IP 172.168.9.2 255.255.255.0

!

interface Vlan88

IP 172.168.88.254 255.255.255.0

!

interface Vlan199

IP 172.168.199.254 255.255.255.0

!

IP classless

IP route 0.0.0.0 0.0.0.0 172.168.9.1

IP route 172.168.88.0 255.255.255.0 172.168.9.1

IP route 172.168.100.0 255.255.255.0 172.168.9.1

IP route 172.168.200.0 255.255.255.0 172.168.9.1

IP http server

!

!

control plan

!

Banner motd ^ C is a private network. ^ C

!

Line con 0

line vty 0 4

opening of session

line vty 5 15

opening of session

!

end

Hi Robert,.

I went through the configuration on both the PIX firewall and see that trafficking is not defined for 172.168.88.0/24-->172.168.200.0/24.

If you check the card crypto a PIX configuration, it says:

address for correspondence outside_map 20 card crypto outside_cryptomap_20<--This acl="" defines="" interesting="">

and the outside_cryptomap_20 of the acl says:

access extensive list ip 172.168.9.0 outside_cryptomap_20 allow 255.255.255.0 172.168.200.0 255.255.255.0 connect

Is the same on the PIX B:

address for correspondence outside_map 20 card crypto outside_cryptomap_20

access extensive list ip 172.168.200.0 outside_cryptomap_20 allow 255.255.255.0 172.168.9.0 255.255.255.0

To allow users to talk to each other, apply to these commands:

On the PIX:

access extensive list ip 172.168.88.0 outside_cryptomap_20 allow 255.255.255.0 172.168.200.0 255.255.255.0

access extensive list ip 172.168.88.0 inside_nat0_outbound allow 255.255.255.0 172.168.200.0 255.255.255.0

and PIX B:

IP 172.168.200.0 allow access-list extended outside_cryptomap_20 255.255.255.0 172.168.88.0 255.255.255.0

access extensive list ip 172.168.200.0 inside_nat0_outbound allow 255.255.255.0 172.168.88.0 255.255.255.0

Let me know if it helps.

Thank you

Vishnu Sharma

PIX501 customer VPN - cannot access inside the network with VPN Session

What follows is based on the config on the attached link:

http://www.Cisco.com/en/us/Partner/Tech/tk583/TK372/technologies_configuration_example09186a008009442e.shtml

PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC

We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.

Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!

We have the same problem with the customer 4.0.3(c)

Thanks in advance for any help!

=======================================

AKCPIX00 # sh run

: Saved

:

6.2 (3) version PIX

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

hostname AKCPIX00

domain.com domain name

fixup protocol ftp 21

fixup protocol http 80

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol they 389

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol sip 5060

fixup protocol 2000 skinny

fixup protocol sip udp 5060

names of

access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0

pager lines 24

interface ethernet0 10baset

interface ethernet1 10full

Outside 1500 MTU

Within 1500 MTU

external IP address #. #. #. # 255.255.240.0

IP address inside 192.168.1.5 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

IP local pool akcpool 10.0.0.1 - 10.0.0.10

history of PDM activate

ARP timeout 14400

Global 1 interface (outside)

(Inside) NAT 0-list of access 101

NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

RADIUS Protocol RADIUS AAA server

AAA-server local LOCAL Protocol

the ssh LOCAL console AAA authentication

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

Permitted connection ipsec sysopt

No sysopt route dnat

Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

Crypto-map dynamic dynmap 10 transform-set RIGHT

map mymap 10-isakmp ipsec crypto dynamic dynmap

mymap outside crypto map interface

ISAKMP allows outside

part of pre authentication ISAKMP policy 10

encryption of ISAKMP policy 10

ISAKMP policy 10 md5 hash

10 2 ISAKMP policy group

ISAKMP life duration strategy 10 86400

vpngroup address akcpool pool akcgroup

vpngroup dns 192.168.1.10 Server akcgroup

vpngroup akcgroup by default-domain domain.com

vpngroup split tunnel 101 akcgroup

vpngroup idle 1800 akcgroup-time

vpngroup password akcgroup *.

vpngroup idle 1800 akc-time

Telnet timeout 5

SSH #. #. #. # 255.255.255.255 outside

SSH timeout 15

dhcpd address 192.168.1.100 - 192.168.1.130 inside

dhcpd dns 192.168.1.10

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd allow inside

Terminal width 80

Cryptochecksum:XXXXX

: end

AKCPIX00 #.

Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:

mymap outside crypto map interface

ISAKMP allows outside

Enter these two commands should be enough to reset the ipsec and isakmp.

Cannot access the internal network of VPN with PIX 506th

Hello

I seem to have a problem with the configuration of my PIX. I ping the VPN client from the network in-house, but cannot cannot access all the resources of the vpn client. My running configuration is the following:

Building configuration...

: Saved

:

6.3 (5) PIX version

interface ethernet0 car

Auto interface ethernet1

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

activate the encrypted password of N/JZnmeC2l5j3YTN

2KFQnbNIdI.2KYOU encrypted passwd

hostname SwantonFw2

domain name * *.com

fixup protocol dns-length maximum 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol 2000 skinny

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69

names of

access-list outside_access_in allow icmp a whole

allow_ping list access permit icmp any any echo response

allow_ping list all permitted access all unreachable icmp

access-list allow_ping allow icmp all once exceed

the INSIDE-IN access list allow inside the interface tcp interface outside

list access to the INSIDE-IN permit udp any any eq field

list access to the INSIDE-IN permit tcp any any eq www

list access to the INSIDE-IN permit tcp any any eq ftp

list access to the INSIDE-IN permit icmp any any echo

the INSIDE-IN permit tcp access list everything all https eq

permit access ip 192.168.0.0 list inside_outbound_nat0_acl 255.255.255.0 192.168.240.0 255.255.255.0

swanton_splitTunnelAcl ip access list allow a whole

outside_cryptomap_dyn_20 ip access list allow any 192.168.240.0 255.255.255.0

no pager

Outside 1500 MTU

Within 1500 MTU

192.168.1.150 outside IP address 255.255.255.0

IP address inside 192.168.0.35 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

IP pool local VPN_Pool 192.168.240.1 - 192.168.240.254

location of PDM 0.0.0.0 255.255.255.0 outside

location of PDM 192.168.1.26 255.255.255.255 outside

location of PDM 192.168.240.0 255.255.255.0 outside

PDM logging 100 information

history of PDM activate

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_outbound_nat0_acl

NAT (inside) 1 192.168.0.0 255.255.255.0 0 0

Access-group outside_access_in in interface outside

group-access INTERIOR-IN in the interface inside

Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1

Timeout xlate 0:05:00

Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

AAA-server GANYMEDE + 3 max-failed-attempts

AAA-server GANYMEDE + deadtime 10

RADIUS Protocol RADIUS AAA server

AAA-server RADIUS 3 max-failed-attempts

AAA-RADIUS deadtime 10 Server

AAA-server local LOCAL Protocol

Enable http server

http 192.168.0.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

Permitted connection ipsec sysopt

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20

Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-DES-MD5 value

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

client authentication card crypto outside_map LOCAL

outside_map interface card crypto outside

ISAKMP allows outside

ISAKMP identity address

part of pre authentication ISAKMP policy 20

encryption of ISAKMP policy 20

ISAKMP policy 20 md5 hash

20 2 ISAKMP policy group

ISAKMP duration strategy of life 20 86400

Swanton vpngroup address pool VPN_Pool

vpngroup swanton 192.168.1.1 dns server

vpngroup swanton splitting swanton_splitTunnelAcl tunnel

vpngroup idle 1800 swanton-time

swanton vpngroup password *.

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd address 192.168.0.36 - 192.168.0.254 inside

dhcpd dns 8.8.8.8 8.8.4.4

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd outside auto_config

dhcpd allow inside

scott hwDnqhIenLiwIr9B of encrypted privilege 15 password username

username password encrypted ET3skotcnISwb3MV privilege 2 norm

username password tarmbrecht Zre8euXN6HxXaSdE encrypted privilege 2

username, password jlillevik 9JMTvNZm3dLhQM/W encrypted privilege 2

username privilege 15 encrypted password 49ikl05C8VE6k1jG ruralogic

username bzeiter 1XjpdpkwnSENzfQ0 encrypted password privilege 2

name of user mwalla encrypted password privilege 2 l5frk9obrNMGOiOD

username heavyfab1 6.yy0ys7BifWsa9k encrypted password privilege 2

username heavyfab3 6.yy0ys7BifWsa9k encrypted password privilege 2

username heavyfab2 6.yy0ys7BifWsa9k encrypted password privilege 2

username djet encrypted password privilege 2 wj13fSF4BPQzUzB8

username, password cmorgan y/NeUfNKehh/Vzj6 encrypted privilege 2

username password cmayfield Pe/felGx7VQ3I7ls encrypted privilege 2

username privilege 2 encrypted password zQEQceRITRrO4wJa jeffg

Terminal width 80

Cryptochecksum:9005f35a85fa5fe31dab579bbb1428c8

: end

[OK]

Any help will be greatly appreciated

BJ,

You try to access resources behind the inside interface network?

IP address inside 192.168.0.35 255.255.255.0

If so, please make the following changes:

1 SWANTON_VPN_SPLIT permit access ip 192.168.0.0 list 255.255.255.0 192.168.240.0 255.255.255.0

2-no vpngroup swanton splitting swanton_splitTunnelAcl tunnel

Swanton vpngroup split tunnel SWANTON_VPN_SPLIT

outside_cryptomap_dyn_20 3-no-list of ip access allowing any 192.168.240.0 255.255.255.0

4 - isakmp nat-traversal 30

Let me know how it goes.

Portu.

Please note all useful posts

ESXi hosts SBS 2011, clients lose network via VPN

Greetings,
We have an ESXi Server (in a lab environment) who perform a SBS 2011 and a Windows 2003 (Terminal Server).
We have two locations, connected via a VPN IPSec (2 boxes of ClearOS).
The ESXi host is located in building r. customers in the construction of an experience no problem at all.
Customers in the building B often lose connectivity to network share. We also failed when copying data. Do not forget that the servers are located in the building and issues affecting only users in the B building.
We noticed the event ID 2012 on the VM SBS 2011 event viewer.
The two buildings are connected to a cable broadband 10 mb / 1 mb ISP.
NOD32 Antivirus is installed on the two virtual machines
Any help would be appreciated!
Thank you
Fred9777

Hello

There are a few things to look out for more such links. The following steps were made on W2K and W2K3, so that they are still applicable for you.

(1) is the VPN capable to manage the packet being sent by site B MTU size, sometimes the MTU on VPN size must be less than the default value of 1500 set LAN. You can check this scathing your server with a command like

ping f-l 1500

If you get a message like "packet needs to be fragmented but DF parameter.

You will need to reduce the size of the MTU TCP/IP in the client registry. Try to ping the server with a size of 500 bytes and see how it goes.

(2) setting the server TCP/IP stack

In the registry HKLM \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, create or modify value DWORD of TcpMaxDataRetransmissions. By default, it is set to 5, but I recommend double this value to 10. The TcpMaxDataRetransmissions value is the number of retransmissions of TCP of a data segment without acknowledgement of receipt on an existing connection. TCP retransmits data segments until they are acknowledged or until the expiry of this value. Basically, when a client does not meet a package from the server, the server will attempt to retransmit the packet until TcpMaxDataRetransmissions many times. By increasing this value, you give the customer more time to answer on the server, which will help improve the flaky connections or connections with latency or higher than normal packet loss.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveInterval and HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveTime.

Both entered DWORD.

KeepAliveInterval determines the interval between retransmissions keep until a response is received. If a response is received, the delay until the next keep alive transmission is again controlled by the value of KeepAliveTime.

The connection will be broken once the number of retransmissions specified by TcpMaxDataRetransmissions is remained. KeepAliveInterval is set by default at 1000, which is one second.

KeepAliveTime controls how many times TCP attempts to verify that an idle connection is still intact by sending a living package of the Dungeon. If the remote system is still reachable and running, he will acknowledge receipt of the living transmission to keep. KeepAliveTime is set by default to 7 200 000, or 2 hours.

I hope this helps.

Need help to access the internal network via VPN on ASA5505 8.4 (1)

Recently, I upgraded my ASA5055 from 8.02 to 8.4 and since I have updated to the new version I can access my home network is no longer through the VPN. I can connect to the VPN with no problems however I can no longer ping or you connect to my network of 10.0. Someone would be kind enough to look at my config and tell me what needs to be added to make it work? In my old config, I had a statement of NAT for VPN that is no longer here.

I also wanted to configure WebVPN to work as well, and this is something that I've never been able to understand. Is it also possible that I can be on my 20.0 network and connect to the VPN and access 10.0 as well? When it is connected to my network of 20.0 I'm not received credentials to connect to the VPN. I would be grateful if someone can help out me. The major part of this is the first part of this question.

My configuration:

ASA Version 8.4 (1)

!

ASA5505 hostname

domain xxxxxxxx.dyndns.org

enable encrypted password xxxxxxxxxxxx

xxxxxxxxxxxxxxx encrypted passwd

names of

nameserver 192.168.10.2

Office of name 192.168.10.3

name Canon 192.168.10.5

name 192.168.10.6 mvix

name 192.168.10.7 xbox

name 192.168.10.8 dvr

name 192.168.10.9 bluray

name 192.168.10.10 lcd

name 192.168.10.11 mp620

name 192.168.10.12 kayla

name 192.168.1.1 asa5505

name 192.168.1.2 ap1

name 192.168.10.4 mvix2

name 192.168.10.13 lcd2

name 192.168.10.14 dvr2

!

interface Vlan1

nameif management

security-level 100

IP address asa5505 255.255.255.248

management only

!

interface Vlan2

0050.8db6.8287 Mac address

nameif outside

security-level 0

IP address dhcp setroute

!

interface Vlan10

nameif private

security-level 100

IP 192.168.10.1 255.255.255.224

!

interface Vlan20

nameif Public

security-level 100

IP 192.168.20.1 255.255.255.224

!

interface Ethernet0/0

Description pointing to WAN

switchport access vlan 2

!

interface Ethernet0/1

Uplink port Linksys 12 description

switchport access vlan 10

!

interface Ethernet0/2

Description Server 192.168.10.2/27

switchport access vlan 10

!

interface Ethernet0/3

Uplink Eth1 management description

!

interface Ethernet0/4

switchport access vlan 30

!

interface Ethernet0/5

switchport access vlan 30

!

interface Ethernet0/6

switchport access vlan 30

!

interface Ethernet0/7

Description of Cisco 1200 Access Point

switchport trunk allowed vlan 1,10,20

switchport trunk vlan 1 native

switchport mode trunk

!

Banner motd users only, all others must disconnect now!

boot system Disk0: / asa841 - k8.bin

passive FTP mode

clock timezone PST - 8

clock summer-time recurring PDT

DNS server-group DefaultDNS

domain xxxxxxx.dyndns.org

network object obj - 192.168.50.0

192.168.50.0 subnet 255.255.255.0

Server network objects

host 192.168.10.2

network object obj - 192.168.10.0

192.168.10.0 subnet 255.255.255.224

network object obj - 192.168.20.0

subnet 192.168.20.0 255.255.255.224

network server-01 object

host 192.168.10.2

network server-02 object

host 192.168.10.2

xbox network object

Home 192.168.10.7

xbox-01 network object

Home 192.168.10.7

xbox-02 network object

Home 192.168.10.7

xbox-03 network object

Home 192.168.10.7

xbox-04 network object

Home 192.168.10.7

network server-03 object

host 192.168.10.2

network server-04 object

host 192.168.10.2

network server-05 object

host 192.168.10.2

Desktop Network object

host 192.168.10.3

kayla network object

Home 192.168.10.12

Home_VPN_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224

outside_access_in list extended access permit tcp any any eq 3389

outside_access_in list extended access permit tcp any any eq 2325

outside_access_in list extended access permit tcp any eq ftp server object

outside_access_in list extended access permit tcp any any eq 5851

outside_access_in list extended access udp allowed any any eq 5850

outside_access_in list extended access permit tcp any any eq pptp

outside_access_in list extended access udp allowed any any eq syslog

outside_access_in list extended access udp allowed any any eq 88

outside_access_in list extended access udp allowed any any eq 3074

outside_access_in list extended access permit tcp any any eq 3074

outside_access_in list extended access permit tcp any any eq field

outside_access_in list extended access udp allowed any any eq field

outside_access_in list extended access permitted tcp everything any https eq

outside_access_in list extended access permit tcp any eq ssh server object

outside_access_in list extended access permit tcp any any eq 2322

outside_access_in list extended access permit tcp any any eq 5900

outside_access_in list extended access permit icmp any any echo response

outside_access_in list extended access permit icmp any any source-quench

outside_access_in list extended access allow all unreachable icmp

outside_access_in list extended access permit icmp any one time exceed

outside_access_in list extended access udp allowed any any eq 5852

KaileY_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224

pager lines 24

Enable logging

timestamp of the record

exploitation forest-size of the buffer of 36000

logging warnings put in buffered memory

recording of debug trap

asdm of logging of information

address record [email protected] / * /

exploitation forest-address recipient [email protected] / * / level of errors

Management Server host forest

MTU 1500 management

Outside 1500 MTU

MTU 1500 private

MTU 1500 Public

local pool IPPOOL 192.168.50.2 - 192.168.50.10 255.255.255.0 IP mask

local pool VPN_POOL 192.168.100.2 - 192.168.100.10 255.255.255.0 IP mask

no failover

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow all outside

ASDM image disk0: / asdm - 641.bin

don't allow no asdm history

ARP timeout 14400

!

Server network objects

NAT (private, foreign) static tcp ftp 5851 service interface

network object obj - 192.168.10.0

NAT (private, foreign) dynamic interface

network object obj - 192.168.20.0

NAT (outside) dynamic public interface

network server-01 object

NAT (private, outside) interface static 2325 2325 tcp service

network server-02 object

NAT (private, outside) interface static udp syslog syslog service

xbox network object

NAT (private, outside) interface static service udp 88 88

xbox-01 network object

NAT (private, outside) interface static service udp 3074-3074

xbox-02 network object

NAT (private, outside) interface static service tcp 3074-3074

xbox-03 network object

NAT (private, outside) interface static tcp domain domain service

xbox-04 network object

field of the udp NAT (private, foreign) of the static interface function

network server-03 object

NAT (private, outside) interface static tcp https https service

network server-04 object

Static NAT (private, outside) interface service tcp ssh 2322

network server-05 object

NAT (private, outside) interface static 5900 5900 tcp service

Desktop Network object

NAT (private, outside) interface static service tcp 3389 3389

kayla network object

NAT (private, outside) interface static service udp 5852 5852

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

AAA authentication enable LOCAL console

AAA authentication http LOCAL console

the ssh LOCAL console AAA authentication

AAA authentication LOCAL telnet console

Enable http server

http 192.168.1.0 255.255.255.248 management

redirect http outside 80

location of SNMP server on the Office floor

SNMP Server contact [email protected] / * /

Community SNMP-server

Server enable SNMP traps snmp authentication linkup, linkdown cold start

No vpn sysopt connection permit

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto-map dynamic outside_dyn_map pfs set 20 Group1

Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1

life together - the association of security crypto dynamic-map outside_dyn_map 20 28800 seconds

Crypto-map dynamic outside_dyn_map 20 kilobytes of life together - the association of safety 4608000

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

outside_map interface card crypto outside

Crypto ikev1 allow outside

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH 192.168.1.0 255.255.255.248 management

SSH 0.0.0.0 0.0.0.0 outdoors

SSH timeout 30

Console timeout 30

access to administration management

dhcpd dns 24.205.1.14 66.215.64.14

dhcpd ping_timeout 750

dhcpd field xxxxxxxx.dyndns.org

dhcpd outside auto_config

!

dhcpd manage 192.168.1.4 - 192.168.1.5

dhcpd enable management

!

dhcpd address private 192.168.10.20 - 192.168.10.30

enable private dhcpd

!

dhcpd 192.168.20.2 public address - 192.168.20.30

dhcpd enable Public

!

a basic threat threat detection

statistical threat detection port

Statistical threat detection Protocol

Statistics-list of access threat detection

no statistical threat detection tcp-interception

Server NTP 192.43.244.18

Server NTP 129.6.15.28

WebVPN

internal Home_VPN group strategy

attributes of Group Policy Home_VPN

value of 8.8.8.8 DNS Server 4.2.2.2

Ikev1 VPN-tunnel-Protocol without ssl-client

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list Home_VPN_splitTunnelAcl

value by default-field www.xxxxxx.com

the address value IPPOOL pools

WebVPN

the value of the URL - list ClientlessBookmark

political group internal kikou

group attributes political kikou

value of 8.8.8.8 DNS Server 4.2.2.2

Ikev1 VPN-tunnel-Protocol

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list KaileY_splitTunnelAcl

XXXXXXX.dyndns.org value by default-field

username scottrog encrypted password privilege 0 xxxxxxxxxxxxxx

user_name john encrypted password privilege 0 xxxxxxxxxxxxxxx

username joek encrypted password privilege 0 xxxxxxxxxxxx

eostrike encrypted xxxxxxxxxxxx privilege 15 password username

username almostsi encrypted password privilege 0 xxxxxxxxxxxxxx

username ezdelarosa password xxxxxxxxxxxxxxencrypted privilege 0

type tunnel-group Home_VPN remote access

attributes global-tunnel-group Home_VPN

IPPOOL address pool

LOCAL authority-server-group

authorization-server-group (outside LOCAL)

Group Policy - by default-Home_VPN

authorization required

IPSec-attributes tunnel-group Home_VPN

IKEv1 pre-shared-key *.

type tunnel-group SSLClientProfile remote access

tunnel-group SSLClientProfile webvpn-attributes

enable SSLVPNClient group-alias

tunnel-group type ClientLESS remote access

tunnel-group kanazoé type remote access

attributes global-tunnel-group kanazoé

address VPN_POOL pool

by default-group-policy kikou

tunnel-group KaileY ipsec-attributes

IKEv1 pre-shared-key *.

by default-group Home_VPN tunnel-Group-map

!

!

context of prompt hostname

call-home

Profile of CiscoTAC-1

no active account

http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

email address of destination [email protected] / * /

destination-mode http transport

Subscribe to alert-group diagnosis

Subscribe to alert-group environment

Subscribe to alert-group monthly periodic inventory

monthly periodicals to subscribe to alert-group configuration

daily periodic subscribe to alert-group telemetry

Cryptochecksum:438ed6084bb3dc956574b1ce83f52b86

: end

ASA5505 #.

Here are the declarations of NAT for your first question:

network object obj - 192.168.100.0

255.255.255.0 subnet 192.168.100.0

NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.50.0 obj - 192.168.50.0

NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.100.0 obj - 192.168.100.0

And 'clear xlate' after the above and that should fix your first question.

I would check your second question and get back to you shortly.

Cannot access static nat address via vpn.

I have an asa5510 where I

a static nat from one interface to the other.

I also have a VPN connection to the asa...

On the other side of the vpn connection, I can not access this static NAT.

192.168.170.x is the vpn network.

Is it not possible to access the static NAT over vpn?

the DM_INLINE_NETWORK_16 object-group network
object-network 192.168.0.0 255.255.255.0
object-network vxtron 255.255.255.0
object-network dmz_zone 255.255.255.0
object-network 192.168.170.0 255.255.255.0

MPLS_nat0_outbound list extended access deny host ip 172.26.1.5 all

Access extensive list ip 172.26.0.0 MPLS_nat0_outbound allow 255.255.252.0 object-group DM_INLINE_NETWORK_16

pnat1 list extended access permit ip host 172.26.1.5 all

static (MPLS, inside) 192.168.0.199 access list pnat1

NAT (MPLS) 0-list of access MPLS_nat0_outbound
NAT (MPLS) 1 172.26.0.0 255.255.252.0
static (MPLS, inside) 172.26.1.5 MPLS_nat_static access list

René, happy you including yourself this one! If you could, please mark the post as solved so that we know that it is not need more attention

Help blocking smart devices of via VPN

Hello

I am looking for a solution block smart devices to connect to our network via VPN. Our VPN solution today is ASA5520, and we use Cisco ACS to authenticate the user. We use Cisco VPN client only, no anyconnect or SSL VPN.

Managment is looking for a way that we can stop the smart devices of using VPN clients to connect and allow only desktop computers laptops to connect.

Someone at - there a way we can do this through association or another method?

Worring - I block iPhones & iPad around my overall networkwith 100% accuracy with a few simple lines of config: -.

Group Policy <> attributes

client-access-rule 1 deny version of type 'iPhone OS. "

2-client-access rule allow type * version *.

As it actually works on the OS - not the version of the Cisco VPN Client device.

OfficeJet 6500 E709n: Cannot print after upgrading Windows 10

Cannot print. "Doctor print" said there is a software problem.

Uninstalled the drivers and reinstalled the software complete... twice.

Capable of printing in color "internal" wireless test page but cannot print a doc and it does not show in the Panel "see what's printing.

Uninstalled all printers if none showed, in the Panel. When the software has been reinstalled, it showed two Officejet 6500 s on the control panel.

I tried the post install 'Print sample' with each check printer default and no work.

Seems that the problem started when I "upgraded" to the new Windows 10.

Kili2 wrote:

Cannot print. "Doctor print" said there is a software problem.

Uninstalled the drivers and reinstalled the software complete... twice.

Hi Kili2,

Try to install your printer via "Open network" - via the window icon or desktop to explore - and choose 'Add devices and printers' (you may need to click the arrow next to the question mark for the top menu show).
Let the wizard to search for awhile, selcect your printing device, and click 'next'.

After you follow these steps, search for the new installed printer (the name is shown in network for printer and scanner) in "Printers and devices" in the control panel.
Use this printer as the default printer and you should be able to print over the network cable or wireless.

Sharp MX-2614n - 10,11 drivers - cannot print

We recently bought a new Sharp printer in our office - MX-2614N. Unfortunately, I was unable to find the drivers on the Sharp site. Unlike the old model MX-2600N, which prints without fault, I am unable to do this print even printer with a standard postscript driver.

My Mac with 10.11 can see th printer on network morning and it asks to download drivers or offers standard drivers. Unfortunately no luck.

Recently, I discovered a package on some unofficial site with 10,11 drivers hidden in MX - C26.pkg, which adds dozens of printer in library/printers/PPDs/happy/Resources you want SHARP MX - 2614N.PPD.gz, dated 11.9.2014, but the printer cannot print even with this printer driver. I contacted the local representative of STRONG, but not luck.

Does anyone have a solution for this printer - how to print even in a default configuration without any particular add ons (like duplexer, paper extra. storage etc..)?

I tried one of these:

http://support.sharp.NET.au/drivers/

-version 1.6.0.6 to 10.11 26.1.15 - no luck

http://www.sharp.co.UK/CPS/RDE/xchg/GB/HS.xsl/-/html/product-details-Office-Prin t - 2373.htm? product = MX2614N

-version 1501b 27.1.2015 - no luck

Keson wrote:

I am unable to do this print even printer with a standard postscript driver.

The new machine has a PostScript printing package? For many brands of printers Postscript kit is often an option and without the SDK installed, you will not be able to print using Sharp or generic Postscript PPD MX-2614 - driver who stands for Postscript Printer Description.

Note that some devices support PCL as standard. There is a generic PCL driver included with OS X. This driver does not print in black and white and has a default value of print resolution of 300 dpi. But at least it will let you print.

You can also find that the Sharp supports AirPrint. If you can then you will be able to use the AirPrint driver in OS X, which will let you print in color and print on both sides and even staple (if it has a base unit).

After the upgrade to el capitan, cannot print Canon mp970

Upgrade to El capitan in snow leopard, and now I can't print from my Canon mp970. I went to the site Web of Canon for a printer driver is compatible with the new operating system - found nothing. Found some threads on Apple support community and found a suggestion that recommended to download and install the Gutenprint (CUPS + Gutenprint v5.2.11 - simplified pre2) software. I did that and removed the driver from Canon, but still cannot print. The message I get from the printer is: 'you need to install the software to use this printer. " To install the software, choose App Store... from the Apple menu. If the software for your printer is not available in the App Store..., contact the manufacturer of your printer. »

Any suggestions on what to try next?

Hi Dellis46

I met the same problem and tried several things before finding the solution for the print job. You must install the drivers 'old' Mountain Lion. They still do the job.

Go to: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-833845&os=OS%20X%2010.8%20 (mountain % 20Lion) & language = EN

Download the .dmg package and open it. Dubbel click .dmg package and follow the instructions. Connect your printer by a usb cable and turn on the printer. If not now, it won't work!

Then, go to the apple/menu logo and choose Preferences system - open printers & scanners - click on the button "+" under and on the left side.

If the printer is on and the installation of the finished, .dmg package you should be able to see in a new menu 'Add printer' one or more printers. Add one you need. If your mac is connected to the local network you will see a usb and printer of netwerk MP970 canon MP970 canon (network printer takes a while to appear), including its network address. Add the two printers and name them differently to avoid confusion.

Now everything should work.

It is for the printer. I can't understand how making the scanner works. Run the .dmg package for the scanner is not operate :-)

If someone is tried: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio (mountain % 20Lion) nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-966569&os=OS%20X%2010.8%20 & language = EN

I'd be more than grateful to the person who in fact occur...

See you soon!

Tjerri

disappointment that printshare cannot print with wifi

Hello

is it me or is it a huge disappointment printshare cannot print unlimited pages in wifi connect printed. only 20 pages? is it serious? Anyone know of any alternative to print via wifi unlimited times or I just have to export all to gmail in the form of png images and then print from my computer.

The printershare limit is due to the fact that Lenovo has not in fact given us full of printershare versions, but rather the same demo that you can download the free market... Please see my thread on purchase if you want to go this route, because the on-board Lenovo version is some kind of scam (same as the regular version of the Android market but you can not use it on other devices).

Lenovo has been quite misleading in their marketing when he came to this apps bundled $ 150.

HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

Hi @Ron9871,

Welcome to the Forums of HP Support!

I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.
- Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
- Type the IP address in the browser to bring up the SAP.
- Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
- Select Manual IP.
- Enter your IP address manual (192.168.0.232)
- Enter 255.255.255.0 for the subnet mask, except if it is different.
- Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
- Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
- Click on apply.
Please restart the router, the printer and the computer in this sequence.

If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)
- Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
- File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.
You can try to change your WSD printer port by a Standard TCP/IP port.

To do this, you will need your current IP address printers. The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

Cannot print to a network via vpn printer

Similar Questions

Maybe you are looking for