Cannot process multiple IMAP in Surface RT e-mail accounts

Similar Questions

• In the lower left corner it used to show the e-mail verification process, and it now displays an e-mail account. How to back emil prosedd info.

  In the lower left corner it used to show the e-mail verification process, and it now displays an e-mail account. How can I get information about the e-mail return process.

  The add on Adblock Plus is known to cause this problem. Disable this add if you have it and see if things go back to normal.

  If you do not have Adblock Plus, restart with all add ons disabled and see if someone else is at the origin of the problem.

• El Capitan Upgrade - cannot verify the password for the Exchange e-mail account

  Hello

  My email accounts all worked very well until I installed at El Capitan. Since the upgrade yesterday, I can't access any of my email on the mail accounts. It is one of my Exchange accounts and invites me to check the password and then fails to check. I looked everywhere to try to understand why it won't work but am running out of ideas. I have another exchange account which seems to work very well. I checked all the settings and don't see anything wrong anywhere. Can someone help please I need access to this account (OH and it works fine on my iPhone)

  Thank you

  Delete the Exchange account, and then add it again. It is possible that you will need to do additional work to fix, but this easy option first.

• Cannot set up imap by manual configuration account

  I am trying to create an imap account. I can create pop3 successfully, but not as imap.

  In the mail account configuration window, I put in the name, email address and password. Select imap and put in the name of the server and leave the port, ssl and authentication as autodetect. Check smtp in same way. Retest of press and he is back with the correct port, and there is 'none' in SSL and "normal password" in authentication. This is correct, because I'm trying to communicate with a host unencrypted. Everything looks good at this stage. When I press "done", it provides the warning about being unencrypted. I accept. He then returned to the configuration window and the new tests, which takes a long time (5 minutes or more). He just finally return reporting the "configuration could not be verified - of username or wrong password?" and (username or password is invalid. "These have not been changed since the original test which was a success. Re-insert the name and the password does not change the results.

  If I can get this to work properly with the unencrypted host, I can configure the account to an encrypted host. One step at a time.

  At this point, I seem to be unsuccessful in creating an imap account.

  Thunderbird 38.2.0, Windows 7 Pro.

  I can provide screenshots or Thunderbird troubleshooting information if that would be helpful.

  Thank you.

  Success thereafter.

  I checked port 143. It is open. See the ports Kaspersky report which shows that 143 is active.

  I tried IMAP: port 993, SSL/TLS, instead of SMTP STARTTLS: port 465, SSL/TLS, instead of STARTTLS. It resulted in failure. See image 2.

  I tried IMAP: port 993, SSL/TLS and left the stmp on autodetect. She came back with the 587 port, starttls. See picture 3.

  When I clicked done, he created the account. I was able to send emails to and from this account.

  Note in the report of port that the 993 is listed as imap ssl. Curiously, port 587 is not yet listed. Also oddly, while port 587 is the smtp port specified by the mail host, the host of email specifies port 143 for imap and does not mention the port 993. No matter what. If it works fine.

  Thank you all for your suggestions. I hope that this effort can help others. It was frustrating, but seems to work now.

• I tunes store cannot process of the purchaeses at this time. Please try again later?

  I tunes store cannot process of the purchaeses at this time. Please try again later?

  Yes, there are questions according to https://www.apple.com/support/systemstatus/

  Check the site regularly, when all services are green you will be back to normal. It's not just you.

• I try to send an email I get a message at the top of the screen actually say that Hotmail cannot process and suggesting I check my internet connection.

  My hotmail account is playing up - suggestions pls for the following scenario.  I try to send an email I get a message at the top of the screen actually say that Hotmail cannot process and suggesting I check my internet connection.  I check the connection and everything is ok.  I'm trying to move from one folder to another and sometimees I get the same message.  I delete the 'old' content and it reappears in the folder.  Everything is very confused.  Any suggestions please?

  Please try the Hotmail Forum http://windowslivehelp.com/forums.aspx.

• HP 5520: Cannot scan multiple pages with 5520 Scanner HP on Mac with Yosemite

  Hello, I am unable to scan several pages using my HP 5520 on my new iMac with Yosemite. I can scan only one page. The answers solved on this page are old and I can't make them work. Thanks a lot for your help!

  Hi @goldenm,

  Welcome to the HP Forums!

  I understand that you cannot scan multiple pages with your HP Photosmart 5520, on Mac OS X 10.10 Yosemite. I'm happy to help you!

  What happens when you try to scan several pages? Do you get any error messages?

  In the meantime, try the following steps:

  How to scan multiple pages into a single file with HP Scan?

  Load the document and use HP Scan to scan and save as a file of several page.

• Cannot print multiple copies of Word or Adobe

  Cannot print multiple copies of Word or Adobe (although Notepad works very well, she accepts the demand for multiple copies)

  Windows 7 Ultimate

  This is the next thing I tried...

  HP Laserjet M1005 MFP printer

  Problem: print one copy and ignore the rest of them

  1 mopier moye... There is no mode mopier on my device

  2. adjust the printer to print directly.

  3 re install the driver

  4. update the firmware

  5 restart the spooler and in her service automatic setting

  6 deactivation of advanced print

  7. buy a new printer

  My new printer is Canon LBP 3300

  Problem: His little different than Hp, now when I try to print multiple copies, it does print none of them...

  The two printer works fine with other computers.

  Hi Nitin,

  You mentioned that the mopier mode setting is not available for the printer. You can check if there is a possible working storage?

  Here's how to find one:

  • Select StartControl Panel<>Printers.
  • Right-click the desired printer icon and select printer Properties.
  • Select the device settings tab.
  • Find settings for storage of the work at the end of the list. (Check if the mopier mode is available in this setting. This setting could also be under "Installation Options").
  • Change the settings for active to disabled.
  • Click apply and OK.

  Check out these links for other procedures for troubleshooting related to the issue:

  http://h30434.www3.HP.com/T5/other-printing-questions/LaserJet-won-t-print-multiple-copies-on-Windows-7/TD-p/181367

  http://h30499.www3.HP.com/T5/printers-LaserJet/LaserJet-1320-not-printing-multiple-copies-anymore/TD-p/1125929#.U9eO3eOSx0U

  You can also disable ranking for the printer:

  1. Go to file > Print > collate box.
  2. Uncheck the box for the collate box.

  In addition, when you try to print a document, launch the document in administrator mode. For example: right-click on the word and select run as administrator of mode.

  Please let us know if the problem still persists.

• Cannot send Messages in the other e-mail account in the Mail of Microsoft Surface app

  I'm trying to set up a different e-mail account on my PC of Microsoft Surface in the Mail application.  Initially, I got the message ' to use this account, you must install a digital certificate on this pc... ».  I managed to fix that by disabling the "Server requires SSL" for both the incoming and outgoing server, which also changed the number of outgoing port 465 to 25.

  However, even though my account is now populated with and receive messages, I can't send all e-mail messages.  They just stay in my Outbox and the message " is not available" appears briefly in the upper right corner.  I've fiddled with the account settings (like changing the port to 587) but its made no difference.

  How can I get other outside e-mail accounts of my @outlook.com to work in the Mail application?

  I was able to find a configuration that worked:

  Incoming mail server: put your mail server normal but specify port 143 for Imap

  Uncheck the incoming SSL

  Outgoing mail server: put your mail server normal but enter the port 587 for Imap

  Uncheck the outgoing SSL

  Uncheck the box outgoing server requires authentication. (because Mail first checks the email, your server will allow you to send an email)

  After this configuration, save it, and then come back to check, since the first time I did it, he returned some settings, but after switching between them, it was ok.

  After doing this, messages have been sent and no more will not questions. I hope this helps.

• Cannot process the request because a modal dialog box or the alert is active

  I can't work for the life of me why I get this message when "cannot process the request because a modal dialog box or the alert is active. I simplified my code to reproduce the problem.

  All I want to do is have a dialog box that allows me to edit items on the page... But it does not seem to allow it. I must be missing something simple.

  var selection = app.activeDocument.selection[0];
  
  dialog = new Window('dialog');
  
  var button = dialog.add('button', undefined, 'Resize');
  
    button.onClick = function() {
  
    selection.geometricBounds = [0, 0, 10, 10];
  
  };
  
  dialog.show();
  

  If you use 'dialogue', then you must leave the modal state to interact with the app was done by closing the dialog box.

  var w = new Window('dialog');
  var v = w.add ('edittext');
  var b = w.add('button');
  b.onClick = function(){
      w.close(1);
  }
  if (w.show()==1) alert (v.text);
  

  Or switch to modal MOM like brother suggested dialog boxes...

  Loïc

  Ozalto | Productivity-oriented - Loïc Aigon

• When I pick a color for the foreground color, I have a popup saying "cannot process your request due to a bug"

  I have the CC legal of Photoshop, working with Windows 8.1, 8 GB...

  When I pick a color for the foreground color, I have a popup saying something like "Cannot process your request due to a bug" (I have the Dutch version, so it is translated). When I click 'OK', popup goes you and I can use the color that I took. When I pick a color for the background color, there is no problem. When I switch the front - and the background color, I get the popup again.

  I use Illustrator, InDesign, and Premiere Pro also, I have no problem with these programs.

  -Restarting my laptop does not work

  -Restart Photoshop and the Adobe app does not work

  -I can't update to Photoshop

  -I want to try to remove Photoshop and install it again, but I'm afraid I have to re - install all my brushes and my actions again

  Could someone help me? It's really annoying :/

  What did you do for troubleshooting so far?

  Restoration of preferences after checking all the presets custom like stocks, models, brushes etc. have been saved can be a good starting point:

  t http://blogs.Adobe.com/Crawlspace/2012/07/Photoshop-basic-troubleshooting-steps-to-fix-MOS - issues.html

• Cannot process the SOAP element wsse header: child 'Security' with ' mustUnder

  Hello everyone.
  
  Have created project in Jdeveloper. In this one, I have an external reference for Siebel Service.
  Composite, for the service of external reference (Siebel) I added a security that is strategy * "oracle_wss_username_token_client_policy."
  [Right click on SiebelService-> configure WS Policy-> Security tab, I selected above political]
  
  So other than that I added the property for the policy
  _ _
  < name = "oracle.webservices.auth.username property" type = "xs: String" "
  much = 'false' override = "may" > SADMIN < / property >
  < name = "oracle.webservices.auth.password property" type = "xs: String" "
  much = 'false' override = "may" > SADMIN < / property >
  _ _
  But his return following error,
  Cannot process the SOAP element wsse header: child 'Security' with 'mustUnderstand = "1" ' (SBL-EAI-08000)
  
  It really pushed me in development.
  I really need help. Help me on this issue.
  
  Thanks in advance,
  Magali

  Cannot process the SOAP element wsse header: child 'Security' with 'mustUnderstand = "1" ' (SBL-EAI-08000)

  The problem is next to Siebel. He is not able to understand the security mechanism used on the side of the SOA. There are two options-

  1 use the custom policy and affirmation to the side SOA (please refer to metalink - 1419373.1 note)
  2. write your own custom message handler class and use it next to Siebel to negotiate the safety deficiency

  Kind regards
  Anuj

• Why the file size does not change when I use "Process multiple Images" to add a watermark?

  Hello

  I use 11 elements. To add a watermark to a lot of JPG photos at the same time, I use the function 'process multiple files.

  I select a source folder and a destination folder and adds a number to three numbers for each file. I do NOT check the box marked 'change photo size. After that, I set the watermark I want printed on my photos and hit OK. All files in the source folder are processed and saved with a new name in the destination folder. Loyally.

  But. The file size of the new file is strongly reduced, compared to the original. He's going from 10 MB to 500 KB (in general). Why is this? Is there a way I can help?

  Kind regards

  / Mikael Lindgren

  File size reduction is the effect of jpeg compression. In the process several files dialog, check the bottom option "convert files to the format" and choose "jpeg max quality.

• Problem with "process Multiple Files.

  I use Photoshop Elements 7.0

  Here is a discussion about my problem and three jpg files to show the problem.

  I use quite often the function of "process multiple files. Today, he has developed an error that I can't solve. This problem is the following.

  I chose a directory source for example < rawphotos >

  I chose a destination for example directory < rawphotos/JPEG >

  I then choose "convert files: JPEG Max quality", then click on 'OK '. This is the process I always used.  . . . Refer to capture1.jpg

  PSE 7.0 seems to start to process the first file, but when it does, it leads to a screen "save under" want me back up files is the PSD format.  . . . Refer to capture2.jpg

  This never happened to befrore and I can't get rid of it. If I try to cancel in the box, it simply led to an "error" box telling me that the order has been cancelled... Refer to Capture3.jpg

  I tried to look for previous topics on for one, but not avail.

  Any ideas how to solve this problem?

  Check the raw converter. If you have to be converted to 16-bit, you will not be able to convert to jpg. Set it to 8 bits and see what happens.

• How to combine features of Thunderbird each access to different sets of multiple e-mail accounts on 2 old computers in a configuration of Thunderbird on my new computer?

  The laptop to access my personal email accounts (4 different ones) and my company email accounts (2 different ones). The old office can access my email accounts personal and emails from my wife (2 accounts for her). I now have a new desktop computer and I would like access to all the accounts of a single Thunderbird. It would be extremely difficult to start a new Thunderbird and enter all account information for all of these multiple accounts of a new beginning and re-upload all emails. I know that I can save the Thunderbird profiles separately and restore them to separate the case of Thunderbird on two distinct users, but it's a pain to change username every time one of us needs to see a different e-mail account. If multiple accounts cannot be restored in an instance of Thunderbird new monkey, is there a way to set up two instances of Thunderbird on a single office and restore backup of a computer in a Thunderbird and the other in the second? Thank you.

  Menu (alt + T) OK, tools > options > Security > passwords > saved passwords and by clicking on the button show the password appears what you forgot.

  I think that the closer you get to what you want is two profiles...

  If you change a shortcut for the following arguments according to the target

  -ProfileManager  -no-remote
  

  Thunderbird will run twice on your computer (so it can be opened in each profile) and ask which profile every time it starts. If you use the argument Pei [profile Name] then Thunderbird will begin with the indicated profile (required several shortcuts).

  My goal of looks like this

  "C:\Program Files (x86)\Daily\thunderbird.exe" -ProfileManager  -no-remote