Cannot properly display photos on Instagram

Similar Questions

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• Why my photo cannot be displayed correctly in the edit mode

  Hello, I am a new user of lightrom 6. Why my photo cannot be displayed correctly in the following editing mode? I can't see the picture, so I can't edit or customize.

  

  Please notify.

  Kind regards

  William

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• Satellite L500 - clicking IE "internet page cannot be displayed" appears

  When I click on the internet Explorer icon 'internet page cannot be displayed' error message appears.

  I have to use the 64-bit internet explore to use internet.
  I also have problems to download Skype.

  These problems are related?
  Why internet will not work using the icon of internet explore?

  Please notify. Thanks in advance for your help.

  Hello

  The message "internet page cannot be displayed" appears because there is no internet connection!
  You must first check if the laptop is properly connected to the internet!

  LAN and WLan connection.

  You can also use the Firefox browser instead of Internet Explorer but if id not available internet connection, then the firefox browser does not display anything like IE too.

• I have 12 PS elements and Premier elements installed on Windows 10. How do we install PSE 14 and 14 PE of DVDs so that the Organizer 14 will display photos and videos imported using 12 Organizer? I would also, continue to use PSE12 and EP 12

  I have 12 PS elements and Premier elements installed on Windows 10. How do we install PSE 14 and 14 PE of DVDs so that the Organizer 14 will display photos and videos imported using 12 Organizer? I would also, continue to use PSE12 and EP 12

  When you install a new version of the items, you are prompted to update the current catalog. Creating a new catalog with the data in the old. The new catalog has the same name as before and can be opened in the new version, the old catalog is unchanged, but renamed with a suffix-1 can be opened in the old version without any intervention on your part.

  If you do agree to the conversion prompt, you can do it later from the Catalog Manager; same for the other catalogues.

  Just be careful what you do in a catalog are ignored by the other, they cannot be updated by the other. This means that you will need to choose which version of catalog to choose to manage your files.

  In addition, I don't see a way to use PSE12 catalogs to edit in the PSE14 Editor.

• When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  Hello

  If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):

  Update the software on your Apple Watch - Apple Support

• Cannot correctly display the default Microsoft Web sites text only

  Since "redevelopment" of Windows 10, Firefox cannot correctly display web pages of MSDN, Technet, or most other Microsoft Web sites. All I get is text based websites, no visuals at all.
  There was once a way to have Firefox Web sites meet and pass off as internet explorer or Chrome... has this capacity disappeared or is it the fault of the web programmers at Microsoft screwing around with their code?

  Found the problem...

  EFF privacy Badger blocked MSDN. I reported to EFF the problem, please help everyone in this.

• Facebook cannot access the photo library

  When I try (on a Macbook Pro) 'create album' or 'add photos' on the women's FB page, I can see, but cannot access its photo library.  Why?  I can, however, access the photos directory - unfortunately, uses Photo pictures are not stored there.   Apple told me that they no longer support iPhoto, but were instead switching to 'Photos '.  So that's where all the images are imported from the camera.  WTH?  It shouldn't be this difficult.

  When you use a web browser or any other application that uses the media browser, you can access your own library of Photos of system, but not of other libraries of Photos.  Only libraries can be designated as the library of the system at the same time.

  The photo library of the system will be available from the sidebar of the selector Panel of file like this:

  

• A Web site cannot be displayed more after the upgrade to version 14.01

  I use www.kpnvandaag.nl as a homepage. After the upgrade to version 14.01 this site and only this site will show no more. When go to this page, an error is displayed that says, translated freely: there is an error.
  This page cannot be displayed.

  What is a Web site or Firefox (or other causes) error?

  You may also need to check the settings I n your security software (Norton) to ensure that nothing is blocked.

• I got this message: error. Page cannot be displayed. For more details, please contact your service provider. (9)

  When I tried to access the site stationeryheaven.com , I have a white page with this error message. Error. Page cannot be displayed. For more details, please contact your service provider. (9)
  It has been long since I have been on this site, but why I would get a message like this?
  INIE

  Broken website, same error here on FF or IE.

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• Internet page cannot be displayed/cannot can not find server or DNS error

  I have a new hard drive and cannot connect to the Internet (page cannot be displayed error / cannot find server or DNS error).  Operating system XP and Internet Explorer v6.  I tried without success to create a new network connection.  The only network connection listed is a 1394 connection.  Under Options, LAN settings is set to automatic detection. The firewall is disabled.

  Hello Barbrab

  You must install the network drivers for this system that you did a clean install of windows. After installing the driver, find the network connection. Let me know if it helps.

• Printer properties cannot be displayed. The print spooler is not running.

  I followed the MS KB "file sharing and printers with different versions of Windows" for instructions on connecting my new Win 7 PC to several domestic XP PC in my network. However, once that I had on the right by clicking on the printer for XP to share, popup message "printer properties cannot be displayed. The coil of the printer does not work. This has happened even when clicking on the properties of the printer. I'm stuck now and need guidance on what to do. Thank you!

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!