Cannot publish on Smugmug or Shootproof more (LR 6.2)

Similar Questions

• 3.0.0 error: "cannot publish or run one or more applications.

  Hi all.

  I'm under Fusion 3.0.0 with for the time trial license key.

  All my VM to 2.0.6 seem to have imported 3.0.0 with no problems, but my XP VM gives me an error message VMware once Office XP computer finished loading: "Impossible to post or run one or more applications."  The version of VMware Tools that comes with 3.0.0 is installed.  If I click OK to the error message, it goes and everything seems to be normal.  I wonder why I get this message and how the problem can be corrected.

  A screenshot is attached.

  Thank you in advance for your help!

  Hi, the good news is that if you run no Fusion in Unity mode then this error can be ignored.

  The bad news is that there are a number of issues that can cause this error and the error will be displayed every time your execution of merger.

  If you have time it would help us if you could do the following:

  -Send us information of support. Running help-> support Collect Information. Send the file to [email protected]

  -in the email include a list of all programs that you have installed

  Thank you

  Sailesh

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• Cannot publish a movie in Moviemaker

  Downloaded my Sony Flip Ultra Hd video files and imported to create a movie in moviemaker. I have converted the MP4 to AVI files. I changed the videos then created my movie by adding titles and transitions. The film is long, consisting of about 100 clips and about 20 transitions with an overlay of music about 8 minutes. I can play the movie in movie maker but cannot publish it. When publishing to dvd stop with "unspecified error" at 17% of the encoding (I tried this 5 times with error that occur at the same point of encoding), published on cd or computer the message "windows movie maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again"appears. The source files are available, as I can preview the whole film in moviemaker and he certainly has enough available disk space. This is very fustrating, could someone please advise how to solve this problem.

  Thank you

  kekesala

  Downloaded my Sony Flip Ultra Hd video files and imported to create a movie in moviemaker. I have converted the MP4 to AVI files. I changed the videos then created my movie by adding titles and transitions. The film is long, consisting of about 100 clips and about 20 transitions with an overlay of music about 8 minutes. I can play the movie in movie maker but cannot publish it. When publishing to dvd stop with "unspecified error" at 17% of the encoding (I tried this 5 times with error that occur at the same point of encoding), published on cd or computer the message "windows movie maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again"appears. The source files are available, as I can preview the whole film in moviemaker and he certainly has enough available disk space. This is very fustrating, could someone please advise how to solve this problem.

  Thank you

  kekesala

  =============================================
  More likely, you have a compatibility problem with your source files...
  (it is also possible that your project is too complex).

  See the following article:

  Movie Maker - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Two things that can help:

  (1) Open Movie Maker and go... Tools / Options / Compatibility tab...
  and uncheck all filters.

  (2) convert MP4 files to WMV format before you import into Movie Maker.

  More information:

  Movie Maker and Flip digital camcorders
  http://www.Papajohn.org/mm2-CamcordersFlip.html

  The following forum might be also worth a visit:

  Windows Movie Makers
  http://www.windowsmoviemakers.NET/forums/default.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot publish my error code [0,0] get Web site. Tech in India could not fix.

  The title explains it well enough. I get a notice that the Adobe servers could be offline. Two days in a row when their surveillance says otherwise. Tech in India say that there are blocking on this end to the internet. They suggested that I should create a different username for my computer and download under that. That is a not remedy the problem either. I can also say that access us the internet from our House with 6 or 8 different devices. They connect and send and receive data, including this one (the one who cannot publish with Muse). That's all.

  Thank you, Griff

  I received this a statement in a video on the Adobe Web site. When I heard that I jumped to this conclusion that I searched something written and could not find it. I have been with Adobe Cloud for over 3 years. In any case, my site is in place and up-to-date and me is not expensive. Therefore, I am on with other more important projects.

  Thank you, Jeff "Griff" Griffin

  Griffin CreativeNever say what you do not want to happen. Always thinking and focus only on what you do not want to happen. This is the biggest secret of life.

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• I'm trying to update to 9.3. In the settings there to show as it is downloaded, but when you click install now, etc., I get a message that it cannot verify because we are is more connected to the Internet (which we really are). Help!

  Please help with 9.3 update.  I get the message that the update cannot check because we are is more connected to the Internet.  Restart does not help.

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available. You will have to wait for that Apple releases a new version for Air. If your works well at the moment you are one of the lucky ones.

• Windows Movie Maker cannot publish the movie to the specified location

  From: patiotaiza

  Message: I have a 5-minute project and trying to publish it on my PC I get the following message:

  "Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  I have enough space available in my PC (8 GB on the left), search for the missing files and they are all OK, tried several different locations, editing... and it still doesn't work. I'm sad, can someone help me please?

  Thank you!

  De : John Inzer

  You may have some incompatibility issues with your source files. Take a look at the following articles:

  Movie Maker 2 - problem solving - "cannot record a movie.

  http://tinyurl.com/yjvztz

  or

  http://www.Papajohn.org/mm2-issues-CantSaveMovie.html

  Type of file with Movie Maker compatibility

  http://tinyurl.com/v8tee

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?

  http://tinyurl.com/6n66g3

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer

  MS Digital Media MVP

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• The 64-bit patch is ready for 12 Director? If we cannot publish to IOS?

  The 64-bit patch is ready for 12 Director? If we cannot publish to IOS?

  Thank you

  Hello Javier,

  I just sent you

  The answer is YES

  RJ and I have recently released iOS educational apps built with the Director.

  If anyone needs this fix 64 bit D12 iOS - private message me please.

  (PS - I highly recommend buying otto 'RJ' with all the xtras added iOS - like video)

• Cannot publish the executable file

  I do not work with my colleagues in SZ, which uses Adobe Captivate 8.

  She said that she cannot publish the course as a executable file.

  I ask him to print screen of the page post for me, it really lacks executable button, do I know how this button can get out?

  

  She must be on Captivate 8.0.

  Tell him to go to the Adobe site and download the free update from 8.1 for his version of Captivate.

• Cannot access the Lightroom Develop module more

  My copy of long-standing, personal to Lightroom, I cannot use the Module to develop more.  Now, I get the message: "develop module is disabled.  If please restart Lightroom and connect to the creative cloud. ' Why?  I do not know.  I've never subscribed to the creative cloud.

  The biggest problem is that there is no way to access the creative cloud even if I restart Lightroom.  No CC box does rise.

  I just want to be able to reuse my Lightroom program.

  Help!

  SW

  Hey Stan,

  Please refer to the threads below where the issue has been addressed:

  Lightroom 5.5 'develop module is disabled. Please renew your membership to reactivate the develop module.

  Lightroom Develop module is disabled. Please renew your membership to enable the develop module.

  Lightroom 5.5 'Module Development disabled, please renew your membership '.

  Kind regards

  Sheena

• cannot publish after update

  I can't publish after update to Muse. I have an a Mac if I log in as a visitor I can publish

  Hello

  Could you please try a few suggestion given in this thread

  Re: cannot publish my Muse site to the catalyst for business

• Cannot publish anything. Error state: 503,105002

  Help, please! cannot publish anything of Muse. He says it is an unknown error of Business Catalyst.

  Thank you, Russ

  Maintenance in progress - http://forums.adobe.com/message/6243834#6243834.

  http://status.BusinessCatalyst.com/

  Thank you

  Vinayak

• resize before the publish on smugmug

  is it possible to resize the photos before the publish to smugmug WITHOUT publication to disk first.   I know that I can export disk and resize photos.  Jeffrey friedl of plug-in allows you to download directly to a specified size (automatically creates a temporary folder).  just wonder if the lightroom plugin can do the same thing.

  Thank you

  Yes it can. Just set up in the dialog box that you get by double clicking on the entry in the part of services to publish. I must warn that you should really be careful using it. It is quite buggy and does not allow for output sharpening, which is essential if you resize. Also it would damage considerably if you create a new gallery in the interface, placing it in the wrong place and using the wrong settings. Plugin of Jeffrey's lightyears better. Plugins of publication services are very underdeveloped as the rest of publishing tools. But great idea. Also be aware that, in many cases, you might be better NOT using the services to publish at all, but simply export and download using standard tools.