Cannot publish the FTP site with TypeKit Web fonts

Similar Questions

• Work with TypeKit web fonts on board?

  I'm working on a composition that, when, on the real web site, will use the TypeKit font as the rest of the site.

  For example, the sample used css is

  "din-Digest-web", Arial, without serif ;

  How can I specify that in my composition (even if I can't see it on the edge, which is fine)?

  You can add it the same way as InDesign in the police Panel Add right. See the previous post and sample on InDesign.

  http://forums.Adobe.com/message/4738144#4738144

• I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail.

  I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?

  [moved]

  I had the same problem 2 weeks while in the Mexico.  I contacted the support TWC and the person to whom I spoke said he had to unlock something.  When he did, all my mail came in Outlook in the spam folder.  It was OK because I got my mail.

  I moved to a different House and now have the same problem again.  I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage.  He has not found anything by the previous call that guided him by setting this time.  He said that he would open a ticket and call me in the next 24 to 48 hours.

  Is it reminds and solves the problem, I'll post how it was corrected.

  Amigos audio!

• Cannot publish the executable file

  I do not work with my colleagues in SZ, which uses Adobe Captivate 8.

  She said that she cannot publish the course as a executable file.

  I ask him to print screen of the page post for me, it really lacks executable button, do I know how this button can get out?

  

  She must be on Captivate 8.0.

  Tell him to go to the Adobe site and download the free update from 8.1 for his version of Captivate.

• How can I create a link to an image that is located on an ftp site to a Web page that is located on another.

  How can I create a link to an image that is located on an ftp site to a Web page that is located on another.

  I managed to do it with the full path of the link (file:///C|/Users/myname/Documents/familyK3/image1.jpg), but as it is quite long, I would use the relative path. To be clear, I have 1 site that spans 3 different storage locations for FTP. site1 (named familyK), that contains the page. On this page, I have an image that is in the images on training3 (named familyK3). I tried... / familyK3/images and... /... (/ familyK3/images, but I don't get to see the photo in DW (since it usually refers to an image in the same folder (root)) and not to another location).

  I use dreamweaver8.

  Stephaan

  Use an absolute URL in the field of the CBC to your properties panel.

  http://your_other_site.com/images/filename.jpg"alt ="description">

  Nancy O.

• Is it possible to produce a good professional looking Web site with expression web?

  Is it possible to produce a good professional looking Web site with expression web?

  Hello

  The question you have posted is associated with expression web. Please visit the link below to find a community that will support what ask you:

  http://social.expression.Microsoft.com/forums/en-us/Web/threads/

• Windows Movie Maker cannot publish the movie to the specified location

  From: patiotaiza

  Message: I have a 5-minute project and trying to publish it on my PC I get the following message:

  "Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  I have enough space available in my PC (8 GB on the left), search for the missing files and they are all OK, tried several different locations, editing... and it still doesn't work. I'm sad, can someone help me please?

  Thank you!

  De : John Inzer

  You may have some incompatibility issues with your source files. Take a look at the following articles:

  Movie Maker 2 - problem solving - "cannot record a movie.

  http://tinyurl.com/yjvztz

  or

  http://www.Papajohn.org/mm2-issues-CantSaveMovie.html

  Type of file with Movie Maker compatibility

  http://tinyurl.com/v8tee

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?

  http://tinyurl.com/6n66g3

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer

  MS Digital Media MVP

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• Unable to connect to the FTP site outside

  So I put everything up to having a dynamic dns and I can access the ftp internally, but cannot access the ftp from outside any suggestion. Heres a little I have verizon wireless modem and my router is connected to the modem I have ip port ending par.14 which is my nighthawk forwards towards the front port of the router port 21

  You do not specify what router you have, but since you are posting in the Nighthawk forum, I'll assume that's what you have.

  If you look on page 89 of the R7000 manual, you will see that there are two FTP settings. One to allow local access and the other to allow access to the Internet. You must activate the latter.

  http://www.downloads.NETGEAR.com/files/GDC/r7000/R7000_UM_21Dec2015.PDF

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot send the UDP datagram with device 8320 (V4.2.2.180)

  There is a post says "Cannot send the datagram UDP with JDE 4.5" to

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=14528&view=by_date...

  In the emulator of JDE4.2 it really works, but he meets the same problem in the blackberry8320 (V4.2.2.180) device, get the same java.io.IOException (detailMessage = null) to the send() operation;

  I looked in the (accessible via wifi) PC with a tool named Sockettool (it can create the client and Server TCP/UDP), it can be connected to the emulator and receive datagrams sent to the emulator, but can not be connected to device.

  Is this a problem related version too?

  Appreciate if you can share your experience with datagram connection to the device.

  Here is my code:

  Emulator: host = "udp://iport1; port2.

  Feature: host = "udp://iport1; port2 /; = wifi interface.

                  try {
                      udp_client = (DatagramConnection) Connector.open(host);
                      byte[] data = {65,66,67,68};
                      int len = data.length;
                      dg_out = udp_client.newDatagram(data, data.length);
                      udp_client.send(dg_out);
                      udp_client.close();
              }catch (Exception e) {
                      System.out.println("UDP Exception:"+e.getMessage());
                  }
  

  If the application is able to send and receive UDP traffic in the BlackBerry Simulator, but not on a BlackBerry real pocket computer the first thing to check is to check that your carrier supports.  Several carriers do not support UDP traffic or restrict to specific ports or data types.  This can cause exceptions or make it appear that the application will silently fail (carrier is just dropping packets).

• Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Windows:

  1. Close all applications.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.

  Macintosh:

  1. exit the Adobe Digital Editions software.
  2. Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
     If you use 10.7, see library access hidden files. Mac OS 10.7 and later.
  3. Open Adobe Digital Editions and reauthorize.

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK

• Using your own Muse and NOT TypeKit web fonts

  Hi all, I bought a family of InDesign for the police that I will use in my Web site. There is no option to add my own web fonts in menu fonts anywhere, just web safe, typekit system. For now, I think of my website with the desktop version of MI of times to help to see what the end result will be to weave as a bit. Is there a way I can attribute my time on my site after my site is built and exported to my web server somehow? I can't believe that this is not an option. I would use Dreamweaver but it's useless hard to build a Web site in it.

  Any help would be appreciated.

  Hello

  Adobe Muse CC 20141 (published earlier today) supports self-hosted web fonts. To use a specific font in your Muse site, you will need to install the font system (an appropriate license to use desktop) and provide the files to corresponding web fonts (a license appropriate for use on a Web site).

  This should address one of the original applications in this post on the forum.

  Try it and tell us if you need help or have problems.

  Thank you

  Abhishek

• Replacing the current site with new site Made in Adobe Muse, after download from FTP can not do work?

  I tried this again and again. I have the FTP and password... I changed the liabilities to another... and is in charge of all the way to 99% and said FTP has expired. I then went through GoDaddy (host and also have FTP on there)... all this shows (Vitro export the folder with all the files of muse). I have the preview mode Local in Dreamweaver and all is great. However, set the remote server mode. See the folder under another folder and now site is completely inaccessible with nothing. Any help? Please, I beg you!

  I doubt there are many Adobe or anyone here can help with if it's GoDaddy expire. I would say try to publish the site on a Business Catalyst trial site and check that everything works.

• How to save all the files associated with a Web site?

  I'm an administrator (but not the creator) of a Web site that I am responsible for the update. I don't have the documentation that I need to do some of my tasks. So I thought that I could find enough simply to save the site from Firefox.
  The last time that I have this (several versions of Firefox there is), there is a command "save under" which would save the main HTML file in your selected folder AND save all the subsidiary referenced files in a single subfolder, so built a local version of the site.
  When I tried this today in v20.0.1, the two options "Save As" only created a single file of the current page with all the original references links on the left.
  Is there another way to 'dumping' of the entire application on my hard drive?

  I initially save as "Web Page, complete"? , but the hrefs all mentioned on the real web site, not to any local versions.

  I also tried the Scrapbook addon. It does not seem to do what I want, but I can't find where it stored all the files. I'll be back with the author of the album.

  PS. Why can't I find setting controls in shape when you enter a question?