Cannot select private keyType help or '?' for a list of available commands

Similar Questions

• Cannot select private key

  Hello

  I just noticed when I rebooted my PIX.

  I think I accidentally deleted my RSA key or something.

  I can re - it gen?

  -C

  CA generates the key rsa 512

  generates the key for you.

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a008017278c.html#1037380

• Cannot create private success InDesign Extension for Adobe Exchange

  I tried everything to make it work.

  I used the Adobe Exchange Packer, package manager online at the Adobe Exchange website all without luck.

  
  

  The closest I got it work is add my product to Adobe Exchange and CC picked him up. However, when I will look in 2015 CC IDSN I don't see my extension in "window-> Extensions."

  
  

  Looking at the file system I can see where my ZXP appears in "Store EM-> virtual product" but I think that it is in "store EM-> InDesign."

  
  

  I don't know if it's the manifest.xml, Packers or what.

  
  

  It makes me crazy.

  
  

  Please help me. Thank you.
  

  We've thought of it. We do not have the Bundle ID, the ID of the Extension and the name of Bundle how to navigate. After that we have re-established our ZXPs have been accepted and correctly place.

• Help request for C:\windows\system32\config\system / Bad Pool Caller / on xp

  . Hi, I have xp sp3, and after the established cat off for switching on the pc appears the error message mentioned.  I tried f8 for boot from the sp3 installation CD and ends up with the BAD_POOL_CALLER message.  That's why I can't launch 'r' for recovery apparently safe mode.  Any suggestion would be appreciated before gratefully the cat gets it... Thank you.

  Well, if you can start on some CDs and get to a command prompt on your HARD drive, you should be able to implement the suggestion of KB307545 of Microsoft Support Engineer Halima S and "check if it helps" (I don't think it will be).

  Here's how you describe / have symptoms that indicate the need to use KB307545:

  Zero

  If you want to make a bootable CD from the Console of the Recovery XP (no XP media required) and then to implement the proposal of Microsoft Support Enginner Halima S and check if it helps.

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  When you get into RC, is if you can run a chkdsk/r...  Here's how:

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I'm looking for a list of commands/syntax for number formatting. Example of ^ 1, ^ #, ^ t, etc...

  I'm trying to find a list of command/syntax that can be used in number formatting (bullets and numbering - style - dial number field).  I found a few examples, but I keep a list of available commands.  I searched, but was unable to find it.  Presumably, I'm using the wrong search terms.

  I don't think, because these are only a few. In the automatic numbering of the paragraph style settings dialog box, you have a drop down menu where you can select the formats that are then entered in the form of these shortcuts.

  

• Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. Error number: 0x800CCCD2

  original title: error number: 0x800CCCD2

  Can anyone help with this issue:

  Header download for the 'sent items' folder did not complete. Cannot select "Sent items" on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. Account: 'AOL', server: 'imap.aol.com', Protocol: IMAP, server response: "SELECT failed", Port: 143, secure (SSL): no, error number: 0x800CCCD2

  Thank you!

  Hi again Steve - I have spent a lot of time on the phone this morning to Dell technical support. the accompaniment of the victim and I did a lot of fiddling around with various options of Windows Mail and I don't know exactly what we were doing, but the issue seems to have resolved itself! Thank you for your time and trouble.

  Best, Douglas

• I have toshiba laptop that missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all the other themes are greyed out so you cannot select them,

  I have toshiba laptop missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all other themes are greyed out so you cannot select them, my internet has also stoped working, I also can't do a system restore as it says it does not work any body can help me please?

  My laptop will also not me do a backup.

  Try these:
  METHOD 1:
  Back up all the files on a USB Flash drive or an external hard drive and re - install Windows on the hard disk of laptop.
  -------------------------------------------------------------
  METHOD 2:

  Try partitioning your hard drive and put your files there.

  1. Start menu search: 'drive '.
  2. click on create and format hard disk partitions
  3 right-click the Local Disk (C) and select shrink.
  4. According to the size of the files, we could save, choose the size you want to reduce (1000 MB = 1 GB)
  5. right click on the new "unallocated space" and create the Partition. (Name it BACKUP or something)
  6. place all your important files on the new partition, and then, when you reinstall Windows, select the Local Disk (C)
  DO NOT select the Partition you you saved on files.
  Hope that these answers are useful.

• Money is debited from my account each month however creative cloud it says trial expired? I'm paying for Photoshop and Lightroom but cannot use them? Help!

  Money is debited from my account each month however creative cloud it says trial expired? I'm paying for Photoshop and Lightroom but cannot use them? Help!

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I have a subscription, it's almost over, but I need to change plans and cannot select one I need in the menu plan for change, and I can't cancel. Is it possible to cancel it?

  I have a subscription, it's almost over, but I need to change plans and cannot select one I need in the menu plan for change, and I can't cancel. Is it possible to cancel it?

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

• Cannot select pictures library to external hard drive for apple tv

  Have recently copied to iTunes and pictures libraries in external hard drive. Both apps work well on iMac, on iTunes Apple TV is fine but unable to select Library of Photos from external hard drive via iTunes / folder / Home sharing / choose photos to share with the Apple TV. Can see the drive and can select iTunes folder but cannot select the photo library (in gray)

  think that it only works if the lib has been moved to a drive with a file system that can be indexed for one file system native of apples does not fat or ntfs of any type

• Cannot find HP slimline s5134sc drivers for WLAN

  Cannot find HP slimline s5134sc drivers for WLAN

  I belive I have install the chipset for the s5134sc driver, but can't find the drivers, Please HELP ;-)

  Hello

  You don't specify the operating system that you need to. This would help.

  Have you identified the WLAN device in the device of the alphanumeric string PCI\VEN Manager yet? Right-click on the WLAN device and select Properties, and then use the drop down menu under properties to select hardware ID information.

  

  If I were you, I would consider the upgrade of the mobile device to a half of the modern height with WPA2 security protocol and 802.11n broadband bandwidth. A 802.11b\g like the one your slimline network card has been delivered with doesn't have a lot of bandwidth. Consider Linksys and Netgear network cards. Remember that they must be halfheoght for a slimline PC like yours.

• "Cannot select"[Gmail]"on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. »

  Original title: "error message"

  I get this error message whenever I try to download my gmail account

  Header for the file download "[Gmail]" has not completed. Cannot select "[Gmail]" on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. Account: 'imap.tools.sky.com', server: 'imap.tools.sky.com', Protocol: IMAP, server response: ' unknown mailbox: [Gmail] (failure)', Port: 993, secure (SSL): Yes, error number: 0x800CCCD2

  Please repost your question on the Forum of GMail at: http://www.google.com/support/forum/p/gmail/label?lid=745896f193361992&hl=en where the experts to GMail will be happy to help you.  You can also try technical assistance tohttp://mail.google.com/support/.  It is a GMail problem, not a problem of Vista.  If you use an e-mail program rather than online access, then it is possible that the e-mail program settings are incorrect. We do not know these settings but people to GMail.  That said, here's the IMAP settings for a number of e-mail programs (generic parameters - obviously not including your specific account):http://mail.google.com/support/bin/topic.py?hl=en&topic=12806.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• APP-SQLAP-10380: you cannot select this payment document

  The user did a quick payment. When the audit failed to print user canceled the check and tried to reproduce. Now, when the user tries to repeat the verification that they are getting the following: APP-SQLAP-10380: you cannot select this payment document because it is used by another batch of payment.
  
  I crossed from Metalink and found this article: R11i: prompt payment for EFT payments will be withheld the Document to pay other bills [158828.1 ID]
  
  A query in the metalink article said that "If this query returns rows then contact oracle for data correction support.
  
  The query did return rows. However, this is quite urgent and I'm not sure what Support Oracle will get back to me. I did a Sev 2 SR for this. I was wondering if there was things from front end that I could do to clear this batch of payment so I could reissue a check?
  
  Any help would be appreciated.
  Thank you

  Please see these documents.

  R11i: SEPA: AFTER the PATCH 6741280, PAYMENTS QUICK ERROR APP-SQLAP-10380 [ID 1060865.1]
  App-Sqlap-10380 you cannot select this batch of payment of the formatted payment document [ID 309655.1]
  APP-SQLAP-10380: you cannot select this payment Document because it is used by another batch of payment [1335053.1 ID]
  R11i / R12: FAQ for single European payments (SEPA) [ID 791226.1]
  APXPAWKB after using the Format of payment NL for prompt payment, payment Format cannot be used [ID 250332.1]
  Impossible to enter Quickcheck Eft Polish formats [397791.1 ID]

  Thank you
  Hussein

• "ORA-01445: cannot select ROWID' v4 tabular.

  Hi guys,.
  
  We had major problems since the transition from v2 to v4.
  
  One of the problems I've had is with tabular forms.
  
  I have a complex page with many regions which has always worked well in version 2. One of these regions is a tabular presentation. When loading the page, I get the:
  
  "ORA-01445: cannot select ROWID from where sample, a join without key preserved table view ' error."
  
  The initial request was quite complex, but I've broken down it:
  
  This query runs and allows me to update the base table (xxmel_apex_eco_alterations)
  
  Select
  replace. ALTERATION_ID,
  replace. ALTERATION_ID ALTERATION_ID_DISPLAY,
  replace. ECO,
  alt.ORGANIZATION_ID,
  replace. ACD_TYPE,
  replace. INVENTORY_ITEM_ID,
  replace. BEFORE_CHANGE_QTY,
  replace. AFTER_CHANGE_QTY,
  replace. MODIFY_FLAG,
  replace. REVISED_ASSEMBLY_ID,
  replace. BILL_SEQUENCE_ID,
  alt.COMPONENT_SEQUENCE_ID,
  replace. LAST_UPDATE_DATE,
  replace. LAST_UPDATE_BY,
  alt.COMMENTS,
  replace. BOM_IMPLEMENTATION_DATE,
  replace. BOM_CHANGE_NOTICE,
  replace. ASSEMBLY_NAME,
  alt.COMPONENT_NAME,
  replace. SELECTION_CRITERIA,
  replace. ORACLE_CHANGE_NOTICE,
  alt.COMP_CURRENT_COST,
  alt.COMP_NEW_COST,
  alt.COMP_CURRENT_SC,
  alt.COMP_NEW_SC,
  alt.COMP_DESCRIPTION,
  alt.COMP_CURRENT_UOM,
  alt.COMP_NEW_UOM,
  alt.COMP_CURRENT_PUR_STATUS,
  alt.COMP_NEW_PUR_STATUS
  ALT XXMEL_APEX_ECO_ALTERATIONS
  where eco =: P2_ECO
  
  
  But as soon as I try to join another table (I do not update, just view as shown below), I get the error.
  
  Select
  replace. ALTERATION_ID,
  replace. ALTERATION_ID ALTERATION_ID_DISPLAY,
  replace. ECO,
  alt.ORGANIZATION_ID,
  replace. ACD_TYPE,
  replace. INVENTORY_ITEM_ID,
  replace. BEFORE_CHANGE_QTY,
  replace. AFTER_CHANGE_QTY,
  replace. MODIFY_FLAG,
  replace. REVISED_ASSEMBLY_ID,
  replace. BILL_SEQUENCE_ID,
  alt.COMPONENT_SEQUENCE_ID,
  replace. LAST_UPDATE_DATE,
  replace. LAST_UPDATE_BY,
  alt.COMMENTS,
  replace. BOM_IMPLEMENTATION_DATE,
  replace. BOM_CHANGE_NOTICE,
  replace. ASSEMBLY_NAME,
  alt.COMPONENT_NAME,
  replace. SELECTION_CRITERIA,
  replace. ORACLE_CHANGE_NOTICE,
  alt.COMP_CURRENT_COST,
  alt.COMP_NEW_COST,
  alt.COMP_CURRENT_SC,
  alt.COMP_NEW_SC,
  alt.COMP_DESCRIPTION,
  alt.COMP_CURRENT_UOM,
  alt.COMP_NEW_UOM,
  alt.COMP_CURRENT_PUR_STATUS,
  alt.COMP_NEW_PUR_STATUS
  msib.segment1
  ALT XXMEL_APEX_ECO_ALTERATIONS
  mtl_system_items_b msib
  where eco =: P2_ECO
  and msib.organization_id = 26
  and msib.inventory_item_id = ALT INVENTORY_ITEM_ID
  
  I read Re: v4.0 - in the form of ORA-01445: cannot select ROWID from where sample, where someone had a similar problem for me, but their solution (by copying the script to create a new page) isn't really an option for us the complexity to the page as a whole.
  
  Is this a bug in 4 APEX?
  
  Any help would be great,
  
  Thank you
  Chris

  Hello

  This isn't a bug in the apex, if you want to display a different table column there is a way to create a function to get the value of this table

  to "msib.segment1", you must create a function that accepts that some primary key to and retrieves the value of 'mtl_system_items_b' and can return a value in the field "segment1".

  and you can use your previous query, you can add the name of function as a new field

  for example

  Select
  replace. ALTERATION_ID,
  replace. ALTERATION_ID ALTERATION_ID_DISPLAY,
  replace. ECO,
  alt.ORGANIZATION_ID,
  replace. ACD_TYPE,
  replace. INVENTORY_ITEM_ID,
  replace. BEFORE_CHANGE_QTY,
  replace. AFTER_CHANGE_QTY,
  replace. MODIFY_FLAG,
  replace. REVISED_ASSEMBLY_ID,
  replace. BILL_SEQUENCE_ID,
  alt.COMPONENT_SEQUENCE_ID,
  replace. LAST_UPDATE_DATE,
  replace. LAST_UPDATE_BY,
  alt.COMMENTS,
  replace. BOM_IMPLEMENTATION_DATE,
  replace. BOM_CHANGE_NOTICE,
  replace. ASSEMBLY_NAME,
  alt.COMPONENT_NAME,
  replace. SELECTION_CRITERIA,
  replace. ORACLE_CHANGE_NOTICE,
  alt.COMP_CURRENT_COST,
  alt.COMP_NEW_COST,
  alt.COMP_CURRENT_SC,
  alt.COMP_NEW_SC,
  alt.COMP_DESCRIPTION,
  alt.COMP_CURRENT_UOM,
  alt.COMP_NEW_UOM,
  alt.COMP_CURRENT_PUR_STATUS,
  alt.COMP_NEW_PUR_STATUS,
  newfunction (pkId) as segment1
  ALT XXMEL_APEX_ECO_ALTERATIONS
  where eco =: P2_ECO

  Thank you
  Abdou Bosamiya

• Satellite C40 - cannot select MSC option at startup

  Hi all

  I can't boot from ANY external USB drive as I can't select the MSC option in the boot menu in the BIOS. IT is flawed in the UEFI and is grayed out. I disable secure boot, have tried all the suggestions of what I could find. Is there a way to boot from anything except internal SSD? I can't believe that Toshiba would make such a choice disabling!

  My laptop is Toshiba Satellite C40-C-10 q

  Thanks for any help
  Greg.

  Posted by gbursson
  

  Hi all

  I can't boot from ANY external USB drive as I can't select the MSC option in the boot menu in the BIOS. IT is flawed in the UEFI and is grayed out. I disable secure boot, have tried all the suggestions of what I could find. Is there a way to boot from anything except internal SSD? I can't believe that Toshiba would make such a choice disabling!

  My laptop is Toshiba Satellite C40-C-10 q

  Thanks for any help
  Greg.

  Yes, I have the same problem as well. And have requested such assistance. Toshiba does not help this problem. I even paid technical support and they couldn't deal with it. But the only thing I've found works is that if you convert the hard disk to format GPT format, then maybe the laptop detects the hard drive via a usb connection, which you have described.

  before PROCEEDING I must warn you that if you do one of these things that YOU back UP THE information PRESENT ON OUR SSD, OKAY.

  So try and have access to a command prompt.

  You could just hit escape in your keyboard while making a start cold.

  Or even boot from a usb thumbdrive image operating system to access the repair options.

  Then try to access the command prompt.

  Type "diskpart" in command prompt. Then press

  Enter "list disk" in command prompt. Then press

  Find your hard drive from the list of hard drives. Make sure that you fit the hard drive on the list with the size of the disk ssd.

  Once you do this, note the number of the disk.

  Once you make a note of it, select this drive by following these steps:
  Enter "Select disk (for example" select disk 3 ' would be a good example, but it depends on YOUR disc for your ssd number). " Then press

  Enter the command 'convert to GPT", press

  You will see a message response to leave the command prompt you stating the conversion process succeeded in TPG.

  And if you get a message that it could not be converted, then maybe it's because you have information on him and he needs to be formatted to convert format MBR to GPT format.

  ALright. Well he he converted to GPT, and then we continue:

  (1) of type "exit".

  (2) the first step to exit the command prompt.

  (3) restart your computer.

  (4) try to install windows from usb media and ensure that your hard drive is detected in the installation menu.

  Note: If you still don't see not your hard drive then convert the hard disk MBR format in the same way that I told you to do it with the conversion to the GPT format. Then you can consider making a virtual hard drive partition on the SSD, as TPG VHD format and simply boot from your usb thumbdrive and access os repair to have access to the cmd prompt to attach the virtual hard disk options.

  type diskpart. Press ENTER.

  NOTE make sure your hard drive designated virtual name.

  type of the select vdisk file = ------------.

  Type "attach vdisk" press ENTER.

  It will spit out an answer saying that you attached with success.

  type of flight from the list, and then press enter

  find the letter of your thumbdrive os install.

  Once you find it, hold that thought in your head.

  Press exit.
  type followed by a colon ( press enter)

  as in the following line type the word "setup".

  You should get a pop-up of the start screen for the installation of your windows operating system. Yes, click on setup. Agree to the terms. Do a custom installation and NOW YOU WILL SEE your virtual hard drive partition and now you could install os windwos on it.

  Please note: it worked only with image bootable usb windows 8.1 carrier os and not for windows 7 and it may work for windows 10, but I'm not too sure that it will work because it has not worked for me.

  I hope this helps. If you still have problems with detecting the ssd or HDD virtual so I don't know what to tell you. I must warn you that if you do one of these things that YOU back UP THE information PRESENT ON OUR SSD, OKAY.