Cannot read an SDHC card in Windows Vista SP2
Wednesday, February 15, 2012, 15:22:52 + 0000, EliDirkx wrote:
Hey, I bought a SanDisk Ultra II 8 GB SDHC card some time ago card for my camera.
While I might as well use the cable for my photos, I also have a built-in card reader fit with a hybrid MS/SD/MMC slot.Although none of my MemorySticks seem to have a problem reading, reading of the SDHC card is simply impossible.
The light is just green flicker, then after awhile it just turns off while the Device Manager freezes.I tried to install the fix of the so-called related to this problem, but it seems not to apply to my system.
My system is Windows Vista Home Premium Service Pack 2 installed.
Any suggestions?
Yes. Download a SDHC reader.
Although the SD and SDHC cards look alike, as do readers SD and SDHC,
they are not the same.
Ken Blake, Microsoft MVP
Tags: Windows
Similar Questions
-
Qosmio F50 cannot read the SDHC card 4 GB
Hello
I have a laptop Toshiba Qosmio F-50-series.
I plugged a SANDISK SDHC Card 4 GB on my laptop there is no reaction to recognize new media.
No new driveletter nothing.Can you help me?
Your Starmind/Thomas
Hello
The card reader supports 8 MB SD cards 2 GB and SDHC cards from 4 GB to 16 GB.
Therefore, your card should be recognized without big problems.You insert it correctly?
Also try to remove the card reader device manager, and then restart the laptop. After the Windows has started again, the card reader must be recognized as a new device. Then try to reinsert the CDHC CARE card
-
"Your CD/DVD drive cannot read or write media in Windows Vista" problem
I can't read or write from my CD/DVD drive. The diagnosis and repair of Microsoft link does not work. Is there another way to fix this problem?
Hi ForemanMM,
Thanks for posting your question.
Try to run an automated troubleshooting tool and check if it solves the problem:
http://support.Microsoft.com/GP/cd_dvd_drive_problemsAlso see the Article 314060:
Your CD or DVD drive is missing or is not recognized by Windows or other programs:
http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060Let us know if that fixes the problem.
Kind regards
Clement Kumar.Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.
-
I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card
I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.
I'm a model so need to step by step instructions: o))
Hello
1 have had any changes made on the computer before the show?
2. do you get an error message? If Yes, what is the full and exact error message?
Method 1:
I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.
Method 2:
I also suggest you to check if the memory card is detected by a different card reader.
Method 3:
I suggest you to see link and check if it helps:
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
-
Re: Satellite A200-1N7 does not read the SDHC card using Win 7 32 bit
Hi all
After that I installed windows 7 32 bit on my laptop, it does not read my sdhc card.
And he did it when I got Vista.Can someone help what to do?
Thank you very much:
Adry
Hello
Have you installed the driver for the card reader?
Have you noticed an unknown device in Device Manager?Please see the page of European disk from Toshiba for the card reader driver.
Satellite A200-1N7 belongs to the PSAE3E series
I found the driver of the card reader for Vista 64-bit
Usually the Vista driver should work on Win 7 OS tooIf this does not work, then try the drivers released for A500 or L500 series!
Welcome them
-
Cannot change the hosts file in Windows Vista Home Premium
Posted on behalf of a client:
Cannot change the hosts file in Windows Vista Home Premium. Read-only value.
Help, please.
Hello
I suggest you to try the steps below and check if it helps.
Method 1: Try to take possession of the host file and check to see if the same problem happens.
To apply permissions to a file or a folder:
a. right click on the file or folder and then click Properties.
b. click the Security tab and then click Edit.
c. do one of the following:
· To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.
· To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.
For more information, see the article mentioned below:
What to know before applying permissions to a file or a folder:
Prevent changes to a file or folder (read-only):
http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only
Hope this information is useful.
-
Cannot format drive DVD - Rw with Windows Vista.
Cannot format drive DVD - Rw with Windows Vista. Download "Windows cannot format... or is unable to complete the format. Something like that. See a solution with Windows 7, but I use Windows Vista. Help?
Hello
· What is the model number of your computer?
· Who is the manufacturer of your computer?
· Did you format the disc earlier?
· Are you trying to format the drive using windows Explorer or through third party software?
I suggest you read the web link, below he provided information related to the formatting of disk.
http://support.Microsoft.com/kb/930405
Hope the helps of information. Please post back and we do know.
-
cannot read the sd card. PCI device problem
PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C & REV_01
PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C
PCI\VEN_10EC & DEV_5209 & CC_FF0000
PCI\VEN_10EC & DEV_5209 & CC_FF00series of HP pavilion g4 laptop
my laptop cannot read the sd card
Hello
What is the product/model of your computer? G4 something. The second driver on my very first post should work but why?
Now, I need to know the product/model of your computer and its operating system. Please, use the following instructions to find out:
http://support.HP.com/us-en/document/c00033108
Kind regards.
-
Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?
Ask the question in the Apple Forums:
https://discussions.Apple.com/index.jspa -
How can I tell how much video ram is available to my video card in WIndows Vista? I know this is supposed to be in the system information utility, and I know how to get into that, but to answer the question above... challenging my brain
Hello
In the view of system - adapter RAM - components - information.
Also check the specifications for the video/graphics card from the system manufacturer (which makes the computer), then
Manufacturer of device (which built the video/graphics card) sites.I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I have two Dell laptops, one was my mother and the other is mine (Inspiron 15xx and 1750). I deleted down two laptops using the restore factory images stored on computers. I want that they fully working before I sell them or given the to a friend or relative.
When I try to install Flash or Acrobat Reader, I first download and then run the installation program and then nothing happens, no screen of welcome, no please, wait or loading... dialog box, no error message, just absolutely nothing.
I am a programmer with a degree in computer programming and I built my own computer, reinstalled, installed drivers, software and firmware, so I thought I should be able to solve this problem, but as the still I had no luck so far.
I have:
(1) installed all Windows updates
(2) installed Windows Vista SP2
(3) installed the updates of BIOS, drivers, software and firmware from Dell.
(4) installed the last IE v7 to v9 present. (This fixes my problem to Skype "Sorry, we couldn't connect to Skype")
(5) installed the latest Microsoft Visual C++ 2012 Redistribution.
(6) searched on the internet for the solution and followed a few steps that I thought looked promising but no solution so far.
(7) I checked the logs install but they are empty either, I can't find the directory, or there is no log file here.
For me the main problem is that I don't get any information, i.e. None of the error messages or logs, which makes it very difficult to seek solutions that are specific to my problems. Anyone who can help me to identify the problem, it is find a mistake or a newspaper that shows where the problem is, would help me tremendously and close me solve the problem.
I think I need to install some type of update will miraculously fix the problem, as point 4 above, where IE upgrade to v 9 fixed my problem of Skype, but I have no idea what it would be.
Thank you in advance for all help me and I hope that this forum will help others.
Thanks Abzyx.
I use Firefox all the time and I would have downloaded Flash while in Firefox, but the download never worked. The only solution that worked for me was what I mentioned in the post above (message number 7).
Yes your right, I did not mention on the PDF reader, thanks for pointing that out.
I noticed that you mentioned using another like Sumatra PDF reader, so I had to look that.
I found that Nitro and Sumatra where 2 alternatives to Adobe Acrobat Reader. Nitro looked like a more advanced system, but it does not work. Sumatra seems simpler, but as PDF readers go, if I can read a PDF file, which is fine for me, Sumatra has worked well.
Research on the internet I found a video that has been really good for my problem. I'm looking for 'acrobat reader vista' and the 4 down link was a youtube video called "Install Adobe Reader in Windows Vista" on the page: https://www.youtube.com/watch?v=1wAki19nDSY
After you follow the instructions in the video, I am Acrobat works.
Basically, I went to the URL of the video: ftp://ftp.adobe.com/pub/adobe/reader/win/
Then try to find the most recent version, so I tried 11.0.16, but this does not work, the video shows using 10.0.0, so I thought I would try to use 11.0.0 and if this does not work, try the version 10.0.0. I found version 11.0.0 worked for me then once installed, I checked for update in Acrobat Reader and now I 11.0.8 and this seems to be the best version of work for my computer.
Thank you again Abzyx and everyone who help me by posting your comments. By studying what has been mentioned, internet search and try different installers and more clear, I found what I was looking for.
-
Windows Vista sp2 and Installer cannot install updates error 80070641 code
original title; Windows Vista sp2 installer problem
Hello. I'm running vista 64 bit sp2 and I seem to have a registry error with windows install. Whenever I try to install/uninstall a program, I get the error message
"The application failed to start because msi.dll not found. Reinstalling the application may fix this problem. »
Maybe related, but when I try to run any windows program (examples are programs office, expressions) I get the error message
"the specified module is not found.
Also, I can't do windows updates. For the latter, I get:
error code 80070641
Any help is greatly appreciated. Unfortunately I do not have the original installation disks for vista, or all the backup files.Hi Maxjh25,
It seems to be that some of the files windows install is corrupt.
I have some steps that may help you:
Method 1: Make sure that the Windows Installer service is running.
a. click Startand type services.msc , and then press enter.
(b) in the services window, locate Windows Installer service in the services list.
c. check that the status is started. If the condition column is empty, right-click Windows Installer, and then select start.
d. If you get error trying to force start the Windows Installer service, try to change the Startup Type to Automatic (default is Manual), then
e. restart the computer.
f. If all goes although you should, after the analysis, see the following message "theWindows resource protection did not find any breach of integrity".
g. once the scan is finished, close the command prompt window, restart the computer and check.
For more information, see the link below:
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212
Method 2:
a. try to uninstall Windows install using the Windows Installer Cleanup utility:
Description of the Windows Installer Cleanup utility
http://support.Microsoft.com/kb/290301
b. restart the computer.
c. download and install the latest version of Windows Installer by downloading from the link given below:
Windows install 4.5 Redistributable
d. try to install the program.
Hope the helps of information. Please post back and we do know.
-
Have Windows Vista SP2. Switch on computer will go not on the desktop. Tried to get into the BIOS, but get a blank screen.
Someone at - it ideas. Thank you.Have Windows Vista SP2. Switch on computer will go not on the desktop. Tried to get into the BIOS, but get a blank screen.
Someone at - it ideas. Thank you.Don't ned to start the Office before accessing the BIOS...
The following tutorial is about changing the bios boot sequence.
#1 step is how to get to the BIOS window. THIS show be what you need. You can skip the rest if they do not apply to you.
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/ -
Installation Windows Vista SP2 fails with 737D error code
When you install Windows Vista SP2 via Windows Update program, I continually receive an 737D error Code. This error code says "Windows cannot update services and important files while the system uses them. Save any open files, and then restart the computer. »
Has anyone encountered this problem and found a solution?
Thank you
Joe Kunkel
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
After application of update Windows Vista SP2, FSX will not start
FSX is not started after that I applied Windows VISTA Sp2. When the process is considered to be a task manager, FSX.exe seems to CPU to make loops. Are there not the method to solve something?
Hi BuyIntel,
Thanks for posting on the Forum of answers.
I suggest to backup your saved games and reinstall the program.
Something in the Service Pack may have corrupted some aspects of FSX, this should solve it.I suggest also to visit your video card manufacturers website to download the latest drivers and re-installation of the unit.
I hope this helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
NIS 21012 toolbar does not work with Firefox 2012
Hello, I upgraded my Firefox to 14.01 and as expected the norton toolbar security Internet wouldn't work, it still does not, it is said tollbar NIS is not compatible with Firefox 14.01, I tried everything I can think of.could someone give me any dire
-
Need to support HP telephone number to file a complaint against HP tech
Hi, someone has a HP phone number we where can I contact HP customer service. I would like to file a complaint against tech support to continue to lie to me for 2 weeks now? I already have the number of 800-474-6836 and is where I have the problem. I
-
My Canon Pixma iP 4200 print green.
I have tried all troubleshooting to check if the ink tanks are adequate and procedures in the right position for cleaning the printhead manually. But my ip 4200 canned GREEN print. Measures to dispel this probvlem wlould be appreciated. Thank you...
-
is there a key that will take me to the top of a page?
without using the mouse or arrow keys?
-
Hi Experts, I'm trying to upgrade my notebook windows 7 ultimate Vaio SVS151190X to windows 8 and make the following message. " Intel (r) PROSet/Wireless Software for Bluetooth (r) technology Uninstall this application now because it is not compatibl