Need to support HP telephone number to file a complaint against HP tech

Similar Questions

• I need a support services telephone number?

  I need a support services telephone number?

  Hi henryg35660962,

  Please see Contact Customer Care. Select your product and then the topic. Then, click on the blue still need help? button at the bottom of the page to find information on phone and chat.

  Best,

  Sara

• HP Support Assistant - telephone number incorrect for the Germany

  Let's not the phone number indicated in HP Support Assistant for the Germany. Under the button 'Contact support' location Germany selected, 'call HP"indicates phone number 01805 65 21 80. This phone number no longer in service.

  The right phone numbers are on http://www8.hp.com/de/de/contact-hp/phone-assist.html and in my case, it would be + 49 69 2999 3434 for support for portable computers.

  I used the Feedback button in the HP Support Assistant to report the problem on the wrong telephone number.

  HP Support Assistant version: 7.0.39.15

  Configuration file version: 7.0.2395.1100

  Mike

  The about button / check for the latest version on HP Support Assistant version: 7.0.39.15 (running on the laptop of HP ENVY 15 TS) came back with the result that the latest version is already installed. I noticed that on the page of the driver for my laptop, this 7.3.35.20 Version sp62291.exe is available. Once I had downloaded and installed this new version, support for the Germany phone numbers appear correctly.
  
  Mike

• The # is not my # mysecurity code to us. You have the wrong number on file and I need to access my account. Can you please give a call me to the

  The # is not my # send my security code. You have the wrong number on file and I need to access my account. How do I allow you to select the correct number or can I change my profile somehow and change the phone number so that you can issue a new security code, or determine what is my existing code. I don't seem to have a number 7 digits on file anywhere.

  Thank you

  George Sedlack

  Please contact support for Microsoft Outlook, Mozilla has no relationship with Microsoft Outlook.

• Technical support please - mistake made by moving the large number of files and folders to archive HD, lost of metadata and develop settings, how to correct the error.

  Hoping to hear support or senior tech posters that I made a huge mistake by following the instructions of a person who thought they knew of Lightroom, but didn't.

  Mac Pro, OS 10.10.3. 5.7 Lightroom

  Question:

  Moving about 750Go of files and the associated image files from my drive to Studio work TB 3 to a new 2 TB drive Archive. The first set of records, I moved to in Lightroom, that went well but has been very slow to do that I could move only 12 files at one time or the locked system. After looking online I've been advised to copy all folders that I wanted to go in the Finder, simply drag / drop files from one drive to the other and then synchronize from Lightroom. Files moved OK, but as I guess I should have generated. The XMP files in the moved files no longer have metadata or the development parameters.

  I did not do any work Lightroom since that, so I have the old catalog in Time Machine (hopefully!-j' heard that there may be problem with Lightroom and Time Machine catalog). I also have copies of backup of the work unit until I moved the files.

  I have 2 large jobs, I need to change as soon as POSSIBLE, so need to quickly solve this problem or the LR catalog is going to change and I will not be able to go back.

  Ideally, I'd like to talk to Technical Support in order to go through the steps and explain what I did and make sure I don't lose any data. Is there a number to call? The phone tree says no support for LR phone now...

  Good to hear! In the future if you want to move your image to another drive files proceed as I pointed out here: Adobe Lightroom - find folders and files moved or missing

  It greatly reduces the possibility of this kind of problem happens, and when it you will know because the number of folder, number of files, or size on the disk will not match. Try again until they do not match before reconnecting them with the LR catalog. Computers are dumb... then work smarter.

• I want to cancel a purchase payment Idid subscribe to Adobe to convert a PDF to Word file, I need customer support

  I want to cancel a purchase payment Idid subscribe to Adobe to convert a PDF to Word file, I need customer support

  Here: Contact Customer Care, but be patient and keep clicking until you see the "need more help? (or similar) button, which should help with the chat service if you are in work hours.

• VMware 3.5 - need a guide to analyze how the files of technical support to improve the performance and check the correct settings

  I need to give a recommendation on how deal with VMware 3.5 with virtual center as its production in the environment, but I need and idea to know how and where to start... Fact vmware support team, can analyze these files for me, and it is posible to open a support ticket to make this process of analysis?

  I have a clariion cx3 emc2 storage

  Thank you

  Maynor

  Hello

  Thise drop what you are talking is a set of newspapers and ESXHost configuration files (e.g. unpacking, / var/log/vmkernel etc..) All files have been added to archive tgz. You can extract (sweet 7zip) Windows or Linux (gzip and tar command line tools) I have now if it a tools that will help you analyze these files.

  The only way I know to start the tuning system is fist check performace statistics by each ESXHost (CPU, RAM, i/o per each LUN) for example. for the last days of servén. check when you have peaks on graphs, then go in newspapers of that period of time and start analysing what is.

  BTW. You have problems with your servers?

  Artur

  PS, if this answer is useful for you click on some of the stars, please

• BSOD after copying the large number of files from one disk to another

  Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
  -Gigabyte Z97X Gaming 7 mobo
  -8 GB Corsair vengeance 1866 mhz
  -EVGA GTX 770 video
  -CPU Intel 4770K
  -two hard drives of 1 TB WD black in RAID 1
  -one ADATA 256 Gb SSD as drive OS
  -a 1 TB drive Toshiba
  -Windows 7 64-bit professional
  -F3 Bios Rev

  System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.

  I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 25/06/2014 19:55:50
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Daddys-PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      32358
     
     
      System
      Daddys-PC
     
   
   
      0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
      C:\Windows\MEMORY. DMP
      062514-6692-01
   
  

  No problem, thank you!

  All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8008788138
  Article @ fffffa80087882c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Internal unclassified (Proc 4 row 1)
  Status: 0xbf80000000200401
  Address: 0x00000000fee00040
  Misc.       : 0 x 0000000000000086

  Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.

  -----------------------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.

  4.

  2: kd > lmvm marvinbus64
  start end module name
  fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
  Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
  Image name: MarvinBus64.sys
  Timestamp: Fri Sep 23 17:17:03 2005

  Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).

  5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.

  -----------------------------------------

  If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  Do you still have the MBP? If so you can manually copy and paste the files you need.

  If you do not have the pro more, you need to buy a USB key and plug it into the MBA... use it as a target. Once you have a system file of the previous laptop again, you have to manually choose what to copy across.

• How can I reset 'default' browser / navigator / telephone number selector?

  I discovered that the selection of a default option apparently cannot be changed after the selection. I found this to be true in the quick contact applet - I checked the area and then quickly selected the wrong telephone number. I had to remove that number by editing the contact.

  Similarly, I was exploring "Pocket Agent" by State Farm Insurance. I chose to find a hotel and the option of maps and Verizon Navigator came with the default selection box. I checked the place and selected wrong Navigator - I don't have a subscription to it and it won't work with the applet without subscription. I spoke with State Farm - they say that it is a default operating system used phone, not a fault of the program. I talked to Verizon tech support - they thought it was a fault of the preserved applet. They suggested resetting the data and cache (Nothing in it) of the application. I made these and nothing has changed. I even uninstalled, rebooted and reinstalled - it retains the default value to use an unusable applet. I looked for Verizon Navigator in the list of applications, so I could explore these parameters, but it is not - which means that it cannot be uninstalled, either, I guess.

  How can I change this? I think that there is a 'register' somewhere that contains these default settings.

  Sorry I forgot to answer your question by default number. was busy reading the rest of your son

  get into contact and you will see the number you have chosen has a small check next to him. If you want to switch to another number, then press the new number you want to switch to and press "make default number.

• Maximum number of files that a folder can contain

  Title says it all. What is the practical limit to the number of files that can contain a single folder? These would all be tiny files, usually less than 20K, I'm looking for emotional limit of Windows, rather than the clear disk space limit.

  This is on WinXP SP3 and these files would be created in Word.

  Thanks for any idea.

  I think that with Win7, 20,000 of handling should not be a problem.  Depending on how you access them (such as manually via file |) Open who needs time to load all files to choose among them) it will be slow, but even XP that will handle a lot, even though it may be slower.

  Steve

• I get an error message, "unable to print Test page. You want to discover the convenience of printing support? Cannot create a file when that file already exists"while trying to print.

  Hello

  I could connect network printer and also to view its properties, but when I try to print it shows error.

  Example: when I try to print a test page using the network printer, error

  "Test page cannot print. You want to discover the convenience of printing support? Cannot create a file when that file already exists ".

  I already try to remove the printer and installed again, again, has not worked for me. Someone has an idea for this?

  Concerning

  Original title: unable to print using network printer

  Hi chungb,

  Thank you for keeping us posted.

  I would have you post your query in the Forums of Windows Server , as it is addressed to an audience of it professionals.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

  We know if you need help.

• Windows Explorer: Number of files does not appear in the detailed view

  I want to display the number of files in a folder without right-clicking and selecting Properties.

  In Windows Explorer, when I right click in the window "choose details", I put a check mark next to 'File Count', but the County does not appear.

  The "file number" appears in a column heading, but the fields are empty.

  Hello jwblue,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you experience this problem.  Are your running Windows Vista 64 - bit OS?  I've added a link below that I hope some will offer input on this.  If you have any questions after that I would post this question on the link below.  Thank you!

  FolderSize & IColumnProvider
  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/thread/2056b237-574d-483c-8ecd-f2842dd70081/

  In addition,
  http://blogs.msdn.com/noahc/archive/2007/02/26/folder-size-for-Windows-Explorer.aspx Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• The subsystem needed to support the type of image is not present.

  Virtually all of the programs on my computer will start is no longer.  I get the following error:

  C:\Program Files (x 86) \ "follow-up to program details.

  The subsystem needed to support the type of image is not present.

  This includes Sonos Desktop, LogMeIn, Norton 360, Microsoft Office 2010, Windows Live, etc, etc...

  I can't find any report of this error online before.  It seems that this has started after a Microsoft Update.  Microsoft Recovery cannot restore to a previous point.  I get a reply that she has failed possibly do for an antivirus program.  Uninstall Norton does not start because of problem initially registered.

  All thoughts,

  Thank you

  Hello enthusedmass,

  Thanks for posting on the Microsoft answers Forum.

  You might see if you have corrupted system files.

  First of all, we run System File Checker to see if you have a corrupt file system.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Restart your system

  Now run the command chkdsk:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Please answer and give us an update on your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think