Cannot read cups raster data

Similar Questions

• CD-ROM/DVD-rom cannot read CD - Rs (data or software)

  Windows XP SP3

  32 bit

  Antivirus: Optus (australian) Security

  No anti-spyware and any third-party firewall

  CD/DVD-Rom: 20 x LG GSA-H55N

  Since this CD-ROM/DVD-rom + 3 years now and used to burn/read CD - r.  Since last year, he was not able to read or burn to CD - r (data, audio, old games, software installation CD).  Burning & playback on DVD - r work (with a few issues).  On a previous thread, Chaos_Edit suggested to find the CD-ROM/DVD-rom by Control Panel/Device Manager - DVD/CD-ROM-rom and perform a restart on it.  Unfortunately, there was no Device Manager on my account control panel and can't find the file on my computer.    Any positive HELP is gladly appreciated.  Thank you

  First of all, download your correct terminology.  DVD-ROM (or CD-ROM) is the types of compact discs for read-only.  What you have is a 'internal 20 X Super multi DVD Writer'.

  DVD/CD burners use lasers for CD and DVD.  It is not rare to fail in front of the other.  Otherwise said, simply because your device can read and write DVDs does not mean that it always can read and write CD.

  I have no idea what means "do a reboot on" a CD/DVD burner, whether or not you use the Device Manager.  However, for later use, you can get to the Device Manager at least one of the following ways:

  • Right-click "My computer" and select Properties; Click on the "Hardware" tab Click the 'Device Manager '.
  • Press the 'Windows' key and the 'Pause' key at the same time; Click on the "Hardware" tab Click the 'Device Manager' button (of course only works for keyboards with a "Windows" key)
  • Start > Control Panel > system [or, if you use the 'Category' of the control panel view, "Performance and Maintenance" and then "System"]; Click on the "Hardware" tab Click on "Device Manager".

  I don't know where you buy hardware in ounces, but in general, a replacement CD/DVD burner doesn't have to be expensive.  In the United States, for example,that NewEgg resembles a replacement close enough to what you have for US$ 22.  Be aware that your current device uses an IDE interface rather than the more recent (and now more common) SATA interface.

• HP Pavilion X 2: HP Pavilion XP cannot read data from USB DVDs

  We bought a HP 10-ND200ND (HP pavilion X 2) in the Mediamarkt and tried to install Microsoft Office from a DVD via a DVD USB Samsung player.  This was not possible. According to Support Mediamarkt this product is a Tablet and so cannot read data DVD´s. Only General to play music. To buy a laptop computer for this application. The operating system is Windows 10 (32 bit). Is that correct. Please advice.

  Hi Banhien, the cause is known. I have seen other comments on the HP forum and concluded that the reader needs more power than is available through the USB connector of. I added a hub that can provide power to its connectors USB, HP X 2, by car and the problem has been resolved! It was noted that the mini USB is also more powerful and with the type of adapter USB USB C it might also work, but I did not test this, because I do not have such an adapter. It's odd that such a mini can provide more power. It is surprising that the HP Pavilion X 2 does not have a powerful USB. But the problem is solved. Thanks for your response! Best regards, wiely

• ORA-19846: cannot read the header of the data file of the remote site 21

  Hello

  I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).

  Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.

  After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.

  Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:

  RMAN > recover database service prim noredo using backupset compressed;

  To go back to November 8, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 70 = device = DISK stby type instance

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015

  ORA-19846: cannot read the header of the data file of the remote site 21

  The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.

  Thank you.

  I tried like below:

  1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.

  2 copy the backup of the watch parts, catalogged them on the day before.

  3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.

  OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.

  Make it like:

  1. take incremental backup of primary SNA, also ensures the backup controlfile format.

  2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.

  3. Since you are using OMF, the path of primary and standby data file will be different. (/). If you require catalog data from the database files pending.

  (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.

  4. turn the database copy by RMAN. (RMAN > switch database to copy ;))

  5 Catalog backup items that you copied in step 2.

  6. recover the standby database using 'noredo' option.

  7. finally start the MRP. This should solve your problem.

  The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.

  In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.

  HTH

  -Jonathan Rolland

• Cannot read data from stored procedure

  Oracle forms 6i
  
  Hai All
  
  I created a procedure and stored in a program unit and I called what trigger button but I got an error
  
  cannot read test_pro.
  
  My name is test_pro
  
  
  Thanks and greetings
  
  Srikkanth.M

  Hello

  try something like that.

  When-pressed shutter button.

  test_pro;
  

  Sarah

• How to get around a fake "cannot read itunes library.itl?

  I have a Windows 7 laptop I want to back up the same on a Windows laptop 8.  Should I bring all the files on the Windows 7 laptop to Windows 8 laptop computer including my music/itunes and program/itunes files.  It has worked for years.  All of a sudden I get a message when you go to itunes on the laptop computer of Windows 8 that say 'cannot read itunes library.itl because it was created by a different version.'  This is different from the case referred to the support forum where people want to deliberately use an earlier version of itunes.  I want to use on the laptop Windows 7 and Windows 8 for the latest version of itune laptop.  To make sure that I have request for updates on two laptops from itunes and received responses that I already have the latest version installed on two laptops.  I can access itunes on the Windows 7 laptop, but not Windows Mobile, 8.  How to get around this indication false error on my laptop Windows 8?   I have the latest version and the itunes and all files have been created using the most recent version.

  You have identical versions of iTunes on both machines?  The two latest updates of iTunes (12.3.3, 12.4.0) have included both updates of database for the latest library files can only be read by older versions.

  How are you "Portage" your library data?  The error message may indicate a corrupt library file.

  Also note that you should not try to replicate the folder iTunes program between computers - there is a high risk that the results will be unpredictable, especially since you're moving between two different editions of Windows.  There is really no need to do this - there is no data stored within the hierarchy of program files, who wanted to be replicated on several PC.

• Satellite Pro U200: DVD - RAM cannot read media

  Greetings

  I have a problem with a carpet * a DVD-RAM UJ 8425 in my notebook U200.
  When I insert the CD or DVD in the engine, it cannot read the media.
  The engine starts and runs disc twice or three times, then turn of.

  I have this laptop for 2 months, and only since yesterday, I have this problem.
  In Device Manager it is shown in working order,
  I have change the driver but it's still doesn't work...

  Can you help me to find out where is the problem?

  Hello

  It will be interesting to know does this happen with all sorts of data on the disks. Try checking Autoplay options in the ODD properties.

  By the way: you can see the contents of the disc in Windows Explorer?

• Cannot read the contents of the phone

  My husband iPhone 6 has attracted 13 GB of data.  I use my phone more it does and I only use 6. Something has been bad for months, we have both called Verizon and nothing has helped. I'm trying to upgrade his phone now and iTunes tell if cannot read the content and I need to reset the phone.  I don't want to do it in case it is not completely saved.

  He was frustrated with his phone for months, may not have music on it, full, etc...

  I saw a solution in a similar thread, but did not want to download a 3rd party app to try to fix it.  Waiting for people to apple to help me understand this. Thank you!

  Please notify. Thank you!

  See if this thread (more old, but related) helps. ITunes cannot read the contents of the iphone

  If you're still using OS X 10.5.8. That being the issue. iOS 9 requires 12.3.x and this is the notability on OS X 10.5.8.

  -AJ

• How to read the input data at intervals of 15 Minutes for 14 days

  
  

  Hello Abul,

  You can use reading worksheet function to read the data from the worksheet. You may need to start by importing current data to a CSV file before using this feature as LabVIEW cannot read Excel files.

  From there, you can send the picture in a chart in waveform on the front panel.

  To summarize each variable, you must select a column with the function array index and use the function of elements of array add to get the sum.

• D/DVD-ROM drive cannot read the CD or DVD

  Hello

  I use Windows Vista on my laptop. Its quite some time that I did not use my DVD/CD drive. Today, I try to use but cannot read any CD or DVD. I was trying to solve the problem of updating the drive, but still cannot fix. Can I use Microsoft FIX IT microsoft support but the problem still there.

  Something to say: windows cannot start this hardware device because its configuration (in the registry) information is incomplete or damage (Code 19).

  Click on 'Search the soluton' to send data about this device to Microsoft and to see if there is a solution available.
  I did it but the result is COULD NOT LOAD DRIVER SOFTWARE.

  Please advise what should I do?

  Thank you!

  Hello

  It is very rare for the methods in the 1st answer above does not fix a Code 19.

  You might have a disk problem as the CD/DVD is actually 4 discs in 1 case (CD & DVD and CD burn and)
  DVD playback). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD-ROM drive settings of
  someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.

  I have sony vaio VGN-NR38S. It has a Optiarc DVD RW AD - 7560A ATA DEVICE.

  A few days ago I bought a DVD of driving test. I can't use this DVD in my laptop.

  I tried this DVD in other laptops and it works perfectly, but when I insert in my laptop, it says "Please insert the disk".»
  could someone help please.
  Thank you.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  =======================================

  As needed check with the Sony Support, their drivers and documentation online and ask in their forums
  on the problems known.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• CD rom only reads or writes data

  After several days to burn backup discs, my computer cd rom drive to read data from the drive.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• My CD/DVD drive cannot read or write media.

  I get a message to insert a disc, but it is already in it.   When I reinsert the disc, I get the same message.

  Hello

  Looks like the drive has a problem, possibly a cleaning disc might help if he and the
  below are questionable solutions to what sounds like a hardware problem.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot burn Audio or data by using Windows Media Player CD

  Cannot burn Audio or data on Media Player get an ERROR!

  Very well, I was burning cd I burned a couple and a third, I put the disc in and it showed that it is in their. I did my burn list and clicked on start to burn. He acted as if she was going to burn. It is on the first track for a minute or two then came red of lil DEPISTENT what ERROR which track this continues through all the tracks. I've ruined several discs. I tried to reduce the speed of combustion and that did not help at all. I also have problems with getting the DVD to read. Read some DVD movies and some will not. I did Diagnostics on the burner itself and it keeps coming back that it works correctly and everything goes well with the material itself. Please someone help me.

  Hi Leynak,
   
  1. What is the exact error message you get?
  2. don't you make changes before the show?
  3. when exactly the burn process stops?
   
  If the song is playing, but the burn process continues to stop when inspecting the song, try turning off the upgrade of the volume:
  1. click on the arrow below the burn tab, and then click More Options.
  2. turn off the volume apply upgrade across tracks on the CD check box and then click OK.
  3. try burning the CD again.
   
  Visit this link for more information: burn a CD or DVD in
  Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Burn a CD or DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Player
  Also check if Windows burn engine burns the disc without any problems. Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Burn-a-CD-or-DVD
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.