Cannot reload the Cisco application on my mac

Similar Questions

• Cannot open the file PDF as computer Mac tells me to accept the end user license agreement and to relaunch the browser... How can I do this? URGENT!

  Cannot open the file PDF as computer Mac tells me to accept the end user license agreement and to relaunch the browser... How can I do this? URGENT!

  With closed drive, open your Applications folder and double click (left) on the drive icon.

• Signed .bar - cannot find the default application

  Hello

  a friend send a link to his game app signed .bar to consult. (The game is created with Air 2.5 if it matters)

  I downloaded it with the BlackBerry browser and when I try to open the .bar, an error message appears

  "Cannot find the default application"

  
  I've already put my developer intro PlayBook (OS 2.1) mode.

  How to install the .bar file?

  Thank you.

  Vibes

  You need to side load the folder bar. A lot of discussion on that.

• I tried to download the creative cloud and it didn't download correctly (after a long time) and now I can't uninstall it. It takes place on my computer but I cannot uninstall the Adobe application. Help please!

  I tried to download the creative cloud and it didn't download correctly (after a long time) and now I can't uninstall it. It takes place on my computer but I cannot uninstall the Adobe application. Help please!

  Hi Julie,.

  Please see the below help document to uninstall the application:

  Using creative cloud | Download, install, update or uninstall applications

  Otherwise, you can use the CC cleaning tool as well.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Kind regards

  Sheena

• Cannot install the sample applications manually

  Hello

  I'm having a time difficult installation SDK push sample applications on a remote computer. I try a manual install of Tomcat. The machine runs on Linux Red Hat.

  The error I get is:

  [org.springframework.web.context.ContextLoader.initWebApplicationContext()] - Context initialization failed
  org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registerListeners' defined in class path resource [sample-push-initiator-context.xml]: Invocation of init method failed; nested exception is org.springframework.transaction.CannotCreateTransactionException: Could not open JDBC Connection for transaction; nested exception is org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure
  
  The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)
  

  It looks like a problem with the JDBC connector, but I do not know how to solve. Among the things that I've done are:

  • Generate the database manually.
  • Fill the PushSDK.properties with the database and JDBC information. Copy this file in each directory WEB-INF/classes of applications examples of
  • Copy the mysql connector jar file in the directory WEB-INF/lib of each application
  • Edit the file app.properties with the information from my BB (app id, base url PGG etc.). Copied in the directory WEB-INF/classes of applications. I did the same thing with suspension - context.xml and app - context.xml
  • Edit conf/server.xml of Tomcat to set the http and https ports and the UTF-8 encoding for the request URL query component. In fact, I have only port 8080 available in the machine and I have configured HTTPS to work.
  • A self-signed certificate and shows its location in the conf/server.xml file. Indicates its location in conf/server.xml
  • Edit bin/catalina.sh to set the JAVA_OPTS UTF-8 encoding

  The initial Tomcat page seem to be working in https://machine_ip:8080.

  But there are errors with the BB apps:

  • https://machine_ip:8080 / sample-push-initiator returns 404
  • https://machine_ip:8080 / pushsdk returns 404
  • https://machine_ip:8080 / debug-Portal opens the Debug Portal, but displays the following message:

  Internal Server Error: 
  
  Sorry, we are unable to properly process your request at this time. Please contact a system administrator to investigate the problem by examining the logs.
  

  Does anyone have an idea of what's going on? I would be very help appretiate

  Best regards

  Maria

  Hi all!

  Finally, I could solve this problem. MySQL was not allowing the JDBC connection. I have

  delete the line:

  skip-networking
  

  in MySQL configuration file (/ etc/my.cnf) and now the sample applications seem to work ok.

  I still cannot subscribe to the good customer, but that's another story...

  Kind regards

  Maria

• Cannot connect the WebLogic application server

  I am trying to install the WebLogic application between jDeveloper (11.1.1.4) server. When I created a new connection, I get under result.
  
  JSR-160 LENGTH tests... failed.
  Cannot establish the connection.
  JSR-160 DomainRuntime... skipped tests.
  JSR - 88... skipped tests.
  JSR-88-LOCAL... skipped tests.
  JNDI... skipped tests.
  JSR-160 tests edit... skipped.
  Tests of HTTP... success.
  Test server MBeans model... skipped.
  Test HTTP authentication... success.
  
  2 of the 9 successful tests.
  
  
  I'm going through "Build your first process with Oracle BPM 11g" and I'm at the end of the stage, deployment. However due to the connection problem, Kingdom LOV has nothing in the search for identification Remote_WLServer. Users of demonstration have been deployed and created. All servers are running. No idea what could be wrong?

  Check this post for more information - http://fusionstack.blogspot.com/2010/04/ofm-in-cluster-with-http-server.html

• Finder cannot find the necessary application to open a file.

  Finder becomes more stupid (is that a Word?)! For example, I double click on a Word file with the extension .docx and it opens in preview! Or I right click on a file and the appropriate application is not yet listed! This problem appeared only in the last few weeks; important changes will only have been the OS and Apple updated applications recommended.

  Right click on the file for information. Select what app should open the file, and then select the check box to apply this selection to all files of this type.

• Cannot download the PowerPoint application

  HI people of iOS

  For some reason, I have reset my iPhone 5s and reinstalled all essential, including Microsoft Office applications.  All are good except the PowerPoint application.

  As shown below, whenever the download progress goes up to 2/3, the following error appears and the download is complete.

  

  I tried more than 20 times to re-download on WI - Fi and everything has failed. I also tried to download more 4G, but the App Store download only the size is greater than 100 MB.

  What is the problem with the PowerPoint application? Any solution let me download?

  Cordially and

  Try to download via iTunes on a computer.

• Cannot compile the sample applications with the native SDK BB10

  Hello

  I downloaded the BB10 (10.0.4) native SDK and the sample application pack. However, some of the sample apps fail to compile (AudioControl and BelligerentBlocks, for example). The target isn't the playbook (Simulator).

  I get an error do the following:

  make [2]: * [C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7/AudioControl] error 1
  make [1]: * [all] error 2
  make: * [all] error 2

  Looking at the newspapers of generation, I receive the following linker error:

  'C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7 '.
  C:\bbndk-10.0.4-beta\host\win32\x86\usr\bin\ntoarm-ld: Notes: 'screen_get_window_property_pv' is defined in DSO C:/bbndk-10.0.4-beta/target/qnx6/armle-v7/usr/lib/libscreen.so.1 try so add to the linker command line
  make [1]:

  Am I missing something obvious? I'm competely new to makefiles, so if anyone has a suggestion, it would be welcome.

  Thank you.

  The latest NDK for Playbook is available from: //developer.blackberry.com/native/download/

  For waterfalls NDK 10.0.4, follow the instructions in Momentics content/getting started/Getting Started Guide Help/help / install and set up the Simulator

• Cannot create the new Application in FDQM

  Hello

  I couldn't able to create the new application in FDQM.

  The popup of warning message displayed as "impossible to connect to the database. Please check the databases and verify the database is accessible"

  Environment: SQL Server 2005, windows 2003 R2, FDQM version 11.1.2.2, selected OLE Provider, such as SQLOLEDB

  Please help me solve.

  Kind regards

  Naveen

  Finally, it is resolved.

  I selected SQLNCL1 instead of SQLOLEDB and managed to create demand.

• Cannot deploy the sample applications of the MAF

  I try to install some of the sample applications on the MAF ( jdev_install/jdeveloper/jdev/extensions/oracle.maf/Samples Directory) on my Android (version 4.4.2) phone without success.

  I use jDev build JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S

  If I have a deployment on an Android package using default deployment profiles, I get the following error:

  "Impossible to deploy the profile because the project 'ViewController.jpr' is not a MAF ApplicationController or ViewController project. (oracle.adfmf.framework.dt.deploy.features.deployers.FeatureArchiveDeployer).

  I searched this error in this forum and found this:

  MAF: Build Error "adfmf - not found feature.xml.

  Then I updated the patch of the MAF, and I still get the same error.

  I then fiddled around a bit dependencies of properties/deployment/Android1/Application Profile

  Now I can deploy on my phone, but the application hangs on the splash screen.  Can anyone advise on what things should be checked in the profile dependencies?

  

  OK, I finally understood what is the question.

  After installing the patch of the MAF, jDev so ask to restart your computer, but for some reason any on my computer this can last from a few minutes to a few days!  The first time that I installed the patch, after a reboot, through the Assistant jDev update request I clicked on OK and jDev stop and waited so he could restart. 5 minutes later, it started so I thought I'd launch myself, so I did.  But what I didn't know that in my list of system processes, jDev was still working (perhaps even install the patch).  Here's a screenshot of my system process (that I took during my third attempt, since I suspect something):

  

  Thus, while this process jDev was hanging out, I started jDev myself and ended up having two jDev processes running.  One that I started manually didn't have the MAF Patch applied, but I thought he did it because I just went through the Update Wizard.

  And so all the trouble, I have tried to deploy the sample applications of the MAF.

  I didn't knew that this much later because a few days later, a splash jDev screen suddenly arisen WHILE I was USING jDev, I knew was because the first time, install the patch jDev prompted to restart the computer.

  Only on the third time reinstall jDev and the patch of the MAF has waited more jDev to restart, and when he finally did restart on its own (3 minutes later) that I checked my installation of the fix for the MAF and found that it was installing successfully.

  I then tried to deploy the sample applications of the MAF again and this time it worked.

  So, in summary, because he took if jDev long reboot after installation of the patch of the CRG, I advanced and started jDev myself, but this instance of jDev, I started upward has not installed the fix of the MAF, and so the trouble I had to deploy the samples of the MAF.

  I hope that something can be improved here so that other users the same tracks as I do not work in the same problems in the future.  It can be as simple as a message before reboot in saying the user to wait jDev restart on its own, otherwise their patch will not install.

  Thanks for your time.

• Cannot create the HFM application in Hyperion 11.1.2.3

  Hi all

  We have installed the Hyperion 11.1.2.3 version in Windows Server 2008. SQL Server 2008 R2

  HFM and FDM only we have installed, but when you create the HFM application using Administartion of Consolidation that we are getting the following error.

  An unexpected error has occurred. Check the server log file or contact your system administrator for more information.

  We did it for,

  We re configured HFM and configured web Server, but no luck.

  We reinstalled HFM and configured again with fresh data, but still the same error.

  Your comments would be appreciated... !!

  Thank you

  Mady

  Hi Mady

  The error you posted is pretty generic.

  (I)

  After the audit logs

  1 oracle EPM System > epmsystem1 > financial management > utilities > Error Log Viewer. Check and post if you find more details about the error.

  2. go into the event viewer. Launch eventvwr.exe > Windows journal > Application > search for errors in the source Hyperion Financial Management

  View details of the error.

  (II)

  At the same time please verify if all your HFM services has started well.

  Check in Manager tasks if the following exist

  1 HyS9FinancialManagementWeb_epmsystem1.exe

  2.DMEListener.exe

  3.CASSecurity.exe

  4.HsxService.exe

  5 HFMWebServiceManager.exe

  (III)

  You can even run some Diagnostics of EPM

  Go to start menu > Oracle EPM System > epmsystem1 > Foundation Services > EPM System Diagnostics

  This will give you a clean report that shows if your services have started and are well connected to DB.

• Cannot install the office application

  Hi people from Adobe! I have a subscription to the full Creative Suite, used on my desktop computer. I would also like to install it on my laptop so I can work off site. However, I don't have the Adobe application. When I try to install it, it runs the Setup program and then closes about 3/4 of the way through.

  Does anyone else have this problem?

  Thank you

  Amy Sirota

  Hi Amy,

  Please see the below help document to solve the problem:

  Error download and installation of the creative cloud application

  Kind regards

  Sheena

• Cannot access the HFM applications through the workspace

  Hello
  
  I use HFM 11.1.1.3 version and Oracle database version is 10g. We have the Oracle database has migrated to the new server and configured the HFM applications to this new database server. When I tried to access the HFM application through the workspace, I am getting error below. Please could you help me on this. The error message says that the table or view does not exist. But I'm not able to find which table I missed it.
  
  Track: Error reference number: {464E7E1C-A859-4CB8-B168-99105BB1B756};
  Username: native Directory
  
  NUM: 0x80004005; Type: 1; DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvDSSQL.cpp; Online: 2593; Worm: 11.1.1.3.500.3124;
  
  DStr: ORA-00942: table or view does not exist;
  
  NUM: 0x80004005; Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: Events.cpp; Line: 57; Worm: 11.1.1.3.500.3124;
  NUM: 0x80004005; Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvDSSystemChange.cpp; Line: 179; Worm: 11.1.1.3.500.3124;
  NUM: 0x80004005; Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvSystemChange.cpp; Line: 258; Worm: 11.1.1.3.500.3124;
  NUM: 0x80004005; Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvSystemChange.cpp; Line: 96; Worm: 11.1.1.3.500.3124;
  NUM: 0 x 80040236; Type: 1; DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvSession.cpp; Line: 270; Worm: 11.1.1.3.500.3124;
  NUM: 0 x 80040236; Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvDataSource.cpp; Line: 531; Worm: 11.1.1.3.500.3124;
  NUM: 0 x 80040236; Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsxServerImpl.cpp; Line: 2189; Worm: 11.1.1.3.500.3124;
  NUM: 0 x 80040236; Type: 1; DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsxServer.cpp; Line: 1467; Worm: 11.1.1.3.500.3124;
  DStr: OpenApplication: DEV;
  NUM: 0 x 80040236; Type: 0. DTime: 14/05/2013 01:42:26; SVR: Localhost; File: CHsxClient.cpp; Online: 2373; Worm: 11.1.1.3.500.3124;
  NUM: 0 x 80040236; Type: 0. DTime: 14/05/2013 01:42:26; SVR: Localhost; File: CHFMwManageApplications.cpp; Line: 206; Worm: 11.1.1.3.500.3124;
  
  Thank you
  Michel K

  I solved this problem. I gave bad database schema in the udl file.
  Changed the udl with correct schema file and solves the problem.

• Cannot access the HFM applications

  Hello
  
  I use HFM 11.1.1.3 version and Oracle database version is 10g. We have the Oracle database has migrated to the new server and configured the HFM applications to this new database server. When I tried to access the HFM application through the workspace, I am getting error below. Please could you help me on this. The error message says that the table or view does not exist. But I'm not able to find which table I missed it.
  
  
  Track: Error reference number: {464E7E1C-A859-4CB8-B168-99105BB1B756};
  Username: native Directory
  < BR > Num: 0x80004005. Type: 1; DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvDSSQL.cpp; Online: 2593; Worm: 11.1.1.3.500.3124;
  
  DStr: ORA-00942: table or view does not exist;
  
  < BR > Num: 0x80004005. Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: Events.cpp; Line: 57; Worm: 11.1.1.3.500.3124;
  < BR > Num: 0x80004005. Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvDSSystemChange.cpp; Line: 179; Worm: 11.1.1.3.500.3124;
  < BR > Num: 0x80004005. Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvSystemChange.cpp; Line: 258; Worm: 11.1.1.3.500.3124;
  < BR > Num: 0x80004005. Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvSystemChange.cpp; Line: 96; Worm: 11.1.1.3.500.3124;
  < BR > Num: 0 x 80040236; Type: 1; DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvSession.cpp; Line: 270; Worm: 11.1.1.3.500.3124;
  < BR > Num: 0 x 80040236; Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsvDataSource.cpp; Line: 531; Worm: 11.1.1.3.500.3124;
  < BR > Num: 0 x 80040236; Type: 0. DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsxServerImpl.cpp; Line: 2189; Worm: 11.1.1.3.500.3124;
  < BR > Num: 0 x 80040236; Type: 1; DTime: 14/05/2013 01:42:25. SVR: Localhost; File: CHsxServer.cpp; Line: 1467; Worm: 11.1.1.3.500.3124;
  
  DStr: OpenApplication: DEV;
  
  < BR > Num: 0 x 80040236; Type: 0. DTime: 14/05/2013 01:42:26; SVR: Localhost; File: CHsxClient.cpp; Online: 2373; Worm: 11.1.1.3.500.3124;
  < BR > Num: 0 x 80040236; Type: 0. DTime: 14/05/2013 01:42:26; SVR: Localhost; File: CHFMwManageApplications.cpp; Line: 206; Worm: 11.1.1.3.500.3124;
  
  Thank you
  Michel K

  Hello

  We have migrated the database to the new server with the same verion. I solved this problem. Database schema was wrong in the udl file.
  I just changed the udl with correct schema file and solves the problem.

  Thank you
  Michel K