cannot remove or uninstall 'scrabble complete' my computer

Similar Questions

• Cannot remove Uniblue Driver Scanner to my computer

  I can not remove this program from my computer and start up there are error messages

  You will need to re - install Uniblue, then try to remove it again...

  It is a good program to uninstall... Revo

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  If all goes well, Revo will see the freshly installed Uniblue and remove all traces. When you use Revo, choose the deep clean option...

  See also... http://www.Uniblue.com/support/FAQ/uninstall-Uniblue-programs-computer/

• Z3 double broken screen cannot remove data or cut completely.

  HI, I have a Z3 twice and broke the main screen. I want to delete all data before sending it for repair but the screen does nothing.

  I went through the steps detailed here - http://talk.sonymobile.com/t5/Xperia-Z3-Z3-Dual/unresponsive-screen/m-p/1007534 but I'm not able to switch the phone off completelly - only a soft restart using the power and volume button - the phone then restarts before I can move on to step 4 where I connect the usb with the low volume button. At that moment the phone has rebooted.

  Which allows the phone to completely run out of battery is not an option as above requires at least 80% battery even when it is plugged.

  Is there another way to delete all data or another way off the complete phone using other buttons?

  Thank you.

  Sorry to hear about your phone.

  To turn off the phone, try to keep the yellow button next to the SIM card for a few seconds. Does he put it off so that you can make a PC Companion software repair.

• Windows cannot remove your homegroup computer form

  Hi all! I had difficulties to remove the computer from my dad in my old network homegroup. However it is stated below:

  

  Someone please help.

  Hi Christophe,

  I understand that you cannot remove a computer from the home group.

  This power is produced if a file has been corrupted and remove it got the operation of the PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OHS. "

  I suggest check the link and check how can I remove a computer from a homegroup.

  Homegroup: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Leave a homegroup

  
  http://Windows.Microsoft.com/en-us/Windows7/leave-a-HomeGroup

  Hope that helps you remove the computer from the home group. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Windows:

  1. Close all applications.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.

  Macintosh:

  1. exit the Adobe Digital Editions software.
  2. Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
     If you use 10.7, see library access hidden files. Mac OS 10.7 and later.
  3. Open Adobe Digital Editions and reauthorize.

• missing vDISK, it cannot remove on the settings of computer virtual...

  a vDisk (not the C drive) is missing, cannot remove... on virtual computer settings and can ' start, getting the below error message:

  

  How can I remove it and leave the start the virtual machine.

  I thank you,

  VMX has only a reference on virtual disk 1... There is no reference to VD 2 and 3.

  You can unsubscribe from the virtual machine--> restart services management--> re-registration the virtual machine and see if it works.

  Alternatively, you may create a new vmx:

  --> Unregister the virtual machine--> create new VM--> select "Use existing virtual disk" instead of creating the new disc--> point to virtual disk 1--> and follow the instructions in the wizard.

• I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile,"

  I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile. It may be missing or inaccessible"and Firefox does not open.

  I tried press windows key + R on my computer and open %appdata%\Mozilla\ - and rename the folder labeled "Firefox", but he said that "the action cannot be complete because the folder or the file that is open in another program" I didn't open it and try to restart the pc, but still no help

  A likely cause is a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

  • Windows: %AppData%\Mozilla\Firefox\
    C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/
  • Mac: ~/Library/Application Support/Firefox /.

  You can use one of them to make the Creation/use of a new default profile for Firefox:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
  • Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Error code 0 x 80073601: cannot run or uninstall Microsoft security essentials or install new version

  cannot run or uninstall Microsoft security essentials or install new version

  Original title: what is error code ox80073601

  Hi DavidValentine,

  Check that you have removed all other anti-malware real-time products that were already installed on your PC, including free products / trial that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, Malware bytes (paid), etc.).

  Note: If you use more than one antivirus or antispyware program at the same time, your PC may know a decrease in performance, become unstable, or restart unexpectedly. Before you install Microsoft Security Essentials, or if you want to solve problems with Microsoft Security Essentials, including the update of issues, you must first completely remove your PC Internet security programs.

  You may have to uninstall/reinstall MSE. You should be able to remove MSE of the Control Panel. Uninstall problems see:http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Recommend that you restart the computer to ensure that the uninstall is complete. You can download a new Installation of MSE file fromhttp://windows.microsoft.com/en-US/windows/security-essentials-download

  Response with more information to help you.

• Cannot remove trojan apparent - continues to add registry entries

  I am working on a Dell 2400 that was not (until recently) updated or properly protected with a firewall / virus protection.

  I tried the copy of the demo of Norton Antivirus and it had detected I think:
  Trojan.fakeavalert and another who was virtumundo trojan.vundo or Trojan (I forgot the name)

  Recently, I uninstalled NAV installed the following:

  ZoneAlarm Internet Security (and all updated)
  AdAware 2008 - free version (and it's also up-to-date)

  The two ZoneAlarm & AdAware run fairly clean except for the cookies, etc. (low priority stuff)

  My problem right now is that there is something that is adding entries to the registry (even in safe mode), and it causes many web pages to pop up in IE7 or FireFox.
  The entries that I find in the registry are:
  \HKLM\software\microsoft\windws\currentversion\run
  Rundll32.exe "c:\windows\system32\rulufutu.dll",a"
  Rundll32.exe "c:\windows\system32\piyudijo.dll",a"
  Rundll32.exe "c:\windows\system32\kitehuvu.dll",a"

  When I delete these entries (even in safe mode), they are added in a few seconds.

  Try scans with both of these programs in the following order:

  Please disable other security software that may cause conflicts with the scans. (Remember to enable it later.)

  Instructions on how to do that are HERE.

  Please download for your desktop Malwarebytes' Anti-Malware here or here

  Double-click on mbam - setup.exe to install the application.

  • Make sure that a check mark is placed next to the Update Malwarebytes' Anti-Malware and launch of Malwarebytes' Anti-Malware, and then click Finish.
  • If an update is found, it will download and install the latest version.
  • Once the program has loaded, select "perform quick scan", then click scan.
  • The analysis may take some time at the end, so please be patient.
  • When the scan is complete, click OK, and then view the results to view the results.
  • Make sure that everything is checked
    Click Remove selected.
  • End of disinfection, a log will open in Notepad and you may be prompted to restart. (See additional Note)
  • The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.

  Additional notes:
  If MBAM finds a file that is difficult to remove, you will be presented with 1 of 2 prompt, click OK to either and let MBAM proceed with the disinfection, if asked to restart the computer, you can do so immediately.
  * If you cannot download or install MBAM on your computer, see if you can use the computer to a friend or family member to download MBAM. Use this link to update here to manually download the update. Once downloaded, rename the Setup file "mbam - setup.exe" to something like "catchjunk.exe". Copy the installation file and the update on a CD or a flash drive file. Transfer the file on the infected computer. Install the "catchjunk.exe" file, and then run the update so that you get the current definitions. After that, run a full scan of the system and select to have the program REMOVE everything it finds.

  * If you need to re - install MBAM but problem by reinstalling, try using the MBAM Cleanup utility by downloading from http://www.malwarebytes.org/mbam-clean.exe

  Download and scan with Super Anti-Spyware free for individuals. It is available HERE:
  * Double-click on SUPERAntiSypware.exe and use the default settings for the installation.
  * An icon will be created on your desktop. Double-click this icon to start the program.
  * If it is asked to update the program definitions, click "Yes." If this isn't the case, update the definitions before scanning them by selecting 'Check for Updates. (If you have problems downloading updates, download and unzip them from heremanually.)
  * Under "Configuration and preferences, click Preferences .
  * Click the scanning control tab.
  * Under Scanner Options make sure the following is checked (leave all other non controlled):

  Close browsers before scanning.
  Search the rejected.
  Terminate memory threats before quarantining.

  * Click on the "Close" button to leave the control center screen.
  * Back on the main screen, under "Scan for harmful software" click Scan your computer.
  * On the left, make sure you check C:\Fixed drive.
  * On the right, under "Complete Scan", choose perform complete scan.
  * Click 'Next' to start the scan. Please be patient while it scans your computer.
  * Once the scan is finished, a Scan summary box will appear with potentially dangerous elements that have been detected. Click on 'OK '.
  * Make sure that everything is checked, and click "next".
  * A notification will appear this "quarantine and removal is complete. Click 'OK' and then click on the 'Finish' button to return to the main menu.
  * If it is requested if you want to restart, click 'yes '.

  If that does not solve the problem, maybe it would be good according to a journal of control on the malware removal Forum.

  Be sure to read the instructions at the top of the forum.

• Detcts iPod but ITunes "cannot correctly identify" uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify correctly.

  ITunes detects the iPod, but 'cannot correctly identify' uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify" during each step, also disconnected iPod USB port.

  Try the following (in that order).  Looks like you're using Windows (not a Mac), so I'll make this assumption...

  Shut down (power off) the computer, disconnect all the USB devices.  Plug the laptop power adapter, so that it does not work on battery power.  Do this Reset (reboot), the iPod

  Learn how to reset your iPod - Apple Support

  Start computer, run iTunes and connect the iPod to a USB direct on the laptop by itself.  If there is no difference, put the iPod in Disk Mode

  Put the iPod in disk - Apple Support Mode

  Then connect to the laptop again, always by himself.  If iTunes picks it up, he may ask you to do a restore with a message on the "recovery."  If you're OK with deletion of the iPod, do the restore.  See if the iPod is "correctly identified" after restoration.

  If the problem persists, you said you uninstalled and reinstalled iTunes, but may not have uninstalled iTunes and associated software components.  Follow the steps in this document to uninstall an iTunes installation components, in the order described all listed

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version of iTunes

  http://www.Apple.com/iTunes/

• Any time, I'm trying to uninstall maelstrom of my computer, it keep telling me to close all the windows in maelstrom

  Original title: uninstall maelstrom

  any time, I'm trying to uninstall maelstrom of my computer, it keep telling me to close all the windows in maelstrom, but I can't find more

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  What operating system is installed on your computer?

  I provide you the Windows 7 troubleshooting steps that you did not mention Windows in the wireless category

  This could be due to services running on the background. Close your Maelstrom so that you can make a success, complete uninstall.

  Step 1: Stop the associated process. Press Ctrl + SHIFT + ESC to open the task and then manager stop all processes related to Maelstrom.

  Step 2: Run the fixit to uninstall the program

  The problems that the programs cannot be installed or uninstalled

  https://support.Microsoft.com/en-us/mats/program_install_and_uninstall?WA=wsignin1.0

  Step 3: Check programs and features, if you see the program you uninstall.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Cannot remove an application because it's administered protected.

  Cannot remove an application because it's administered protected. I'm the only user on my PC and I tried to uninstall it and using programs of cleaner files but to no avail. I'm afraid that it changes my files and folders because it has permissions to modify files and every time I have to refuse permissions that they reset. I also noticed various system files in good areas. Any help would be great thanks in advance.

  -Mountford

  I tried everything above, but ultimately I came short. Instead, I saved my precious files and then restore my computer to factory settings. It seems to have worked, but it was a lot of effort, unfortunately I forgot my log in then it will have to do.

  Thanks for all the help.

• How can I remove fmom Speedy PC Pro my computer Windows 7?

  How can I remove fmom Speedy PC Pro my computer Windows 7?

  Speedy PC Pro is a potentially unwanted program.

  To uninstall the Speedy PC Pro computer

  1: click on the Start Menu and click on Control Panel, then:

  2: on Windows Vista or Windows 7, go to the "Uninstall programs" under "programs and features":

  Under XP, it's Add/Remvoe programs.

  3: select the Speedy PC Pro you want to uninstall from the list and click 'uninstall ':

  4: follow the steps in the application of the uninstall program:

  After that if you still see the Speedy PC Pro

  Press the Windows key and R key on the keyboard
  Now, you will get a run window. Inside of the run window, type REGEDIT and press Ok.
  Now you can see a registry. (Be complete care while using the register)

  Don't forget not registry backup before changing. , Follow the steps how to back up and restore the registry in Windows

  Arrived at
  HKEY_LOCAL_MACHINE\SOFTWARE\Speedy PC Pro and delete Speedy PC Pro
  HKEY_CURRENT_USER\Software\Speedy PC Pro and delete Speedy PC Pro

  And restart the computer. Now, it will be gone.

  Enjoyyyyyyyyyyy

• Impossible to remove or uninstall anti-virus administrator software

  I tried to remove this virus protection software, but I keep getting these messages who turns essentially the same: "Confirmation of necessary administrator" or "access denied user administrator account needs. Despite everything, I am the registered owner, the user only and open a session as an administrator. but, apparently, cannot remove this software at will.  This issue is seriously interrupt my work schedule by blocking programs opens once the downloads have reached the end. I know that these programs are safe and harmless but this "free antivirus software" is controlling my computer and now it seems that I am stuck. I want this program off my computer now, so any help will be most appreciated!

  Thanks for your response and I apologize for not naming software, but I thought that we were warned not not provide company names, etc.  This program is of Avast, referred to as Avast anti-virus program. Let me clarify that I have not installed this software. It was installed by an outfit without my authorization, which announced themselves as a computer repair shop. I took my laptop to this company for an estimate of cost to repair a hardware problem with the speakers. As you can imagine it's a story for another day.

  Respectfully,.

  Avast provide a removal tool to remove the program if you have problems using other uninstall methods:

  "Uninstall our software with the help of avastclear"

  http://www.avast.com/en-us/uninstall-utility

  And here's how to start safe mode to run the downloaded removal tool.

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  See you soon.

• Under usb Bus. controllers, I would like to remove or uninstall the mouse drivers several at once?

  under usb controllers (in the device management) there are several (5) standard open HCD usb host listed controllers.    How can I remove or uninstall all at once instead of one at a time.  When you uninstall one both this disables the mouse and you cannot use it until you close the machine and then reconnect the optical mouse usb.  Thank you!  Maybe I should not uninstall any of them? LOF all usb ports work fine and do the mouse.

  What makes you think they are controllers double?

  I don't know what computer you have, but that seems pretty normal to me.

  I wouldn't try to uninstall them. As long as the material is present on your system, they will be resettled at the next reboot.