Cannot requestFocus for textfield in titlebar FreeForm

Similar Questions

• "Windows cannot check for updates" error Code 80080005.

  I have Vista Home Premium, Dell Dimension XPS 410.

  When Windows tries to automatically check the update of Windows, I get a message saying, ' Windows cannot check for updates.

  Error code 80080005.

  Can any ideas on how I fix? I've had this problem for over 3 months now and cannot find information on Microsoft Support Website.

  Thank you

  JA

  Hello drjoe_anzaldua,

  Thanks for posting on the Microsoft Answers forum.

  Usually the "Windows is unable to Check For Updates" error message produced always of the blocker window update connection attempt.

  1. first of all, please check that there is no any third-party firewall preventing Windows Update to communicate with "update.microsoft.com.

  2. check if Windows Firewall is blocking the update of Windows.

  Please see the following article for connection errors:

  http://support.Microsoft.com/kb/836941

  836941. you may encounter temporary connection errors when you use Windows Update or Microsoft Update to install updates

  After following the steps of troubleshooting in the article, if you still get an error message, thanks for posting again so that we can help you.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "windows cannot check for updates ' and my automatic update is on

  * Title *.
  My computer says "windows cannot check for updates ' and my automatic update is on. Can someone help me with this problem?

  Gavextraordinare,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Perform operations ofKB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot check for the error code 80070424 updates.

  I have windows vista premium x 64
  Windows Update stopped working and when I they do it manually it says windows cannot check for the error code 80070424 updates.
  I searched everywhere for an answer... Please help

  ----

• Hi I want to download dreamweaver cs5.5, who want to install it on windows 10 but I get the erorr cannot download for your platform

  Hi I want to download dreamweaver cs5.5, who want to install it on windows 10 but I get the erorr cannot download for your platform

  You must, of course, to have a purchased serial number

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

• Error "Windows cannot check for updates because the service is not running.

  I am using windows vista 64-bit ServicePack two on my laptop. I recently had to install new hard disks. Since then, Windows update does not work. When I check the updates dialog box appears indicating that Windows cannot check the updates because the service is not running. I used the Microsoft fix - it tool, and it recognizes that there is a problem, but cannot fix. History of the update is completely empty. I would appreciate any ideas on how to solve this problem.

  Please read this article:

  http://support.Microsoft.com/kb/2730071/en-us

  Another suggestion is maybe disable the updates of Windows

  Reset.

  Activate the Windows updates.

  Try again. (Worked for some)

  http://Windows.Microsoft.com/en-AU/Windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=Windows-Vista

• Cannot search for windows update, error800700B7

  Original title: Vista 2. Windows Update says first major update but cannot search updates. I get error code 800700B 7.

  I fight with my laptop Acer Aspire 5313 since before the new year, trying to get my Media Player to work... trying to get my updates to load and I finally did a restore disk in desperation. I noticed when I did restore the Version of Windows Vista Home Premium it restored to was that for Service Pack 1, it should have been 2 Pack and registration of license # is different from that on the Windows label on the bottom. I downloaded the Service Pack 2 of MicroSoft.com as my laptop came with ANY disks and I thought I'd finally be able to perform the necessary updates and get at least my laptop up and running again as it was before the problems started. When I try to get the updates, it says I must first update Windows Update. I try to update, update and get tells me it can not search for updates. error code 800700B 7. Help! Please...

  Hello
  You can follow the steps and then check.

  Step 1:
  You can try to disable the antivirus installed on your computer software.
  You can see the following link.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
  You can try to reset the Windows Update components. Read the following article.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
   
  It will be useful.

• Get a Code 10 error "this device cannot start' for my optical drive

  Hello

  I am running a Dell Studio 540 with the following specifications:

  Processor: Intel Q6600 @ 2.4 GHz

  RAM: 4 GB

  HD: 750 GB 7200 RPM SATA

  Graphics card: nVidia 9800GT 512MB

  OS: Windows Vista Home Premium 32-bit

  All the drivers and BIOS are up-to-date.

  My current optical drive is an Optiarc DVD +-RW AD-7200 s ATA Device Unit which has now disappeared from "My Computer". By opening the Device Manager, it has a small yellow triangle with an exclamation mark inside. When I click on it that a new window will open and in the device status area, he said:

  This device cannot start. (Code 10)

  Currently, I have tried two methods without success. First, I downloaded the latest drivers/firmware for the optical drive directly from the Dell Web site, but to try to install, I get an error box saying that the "target drive is not properly".

  I also ran the Mats_Run.devices of the Microsoft Automated Troubleshooting services who correctly identified the problem, but said he could not address them and directed me to these forums.

  Any help would be greatly appreciated.

  Thank you for your time,

  Donald Lundie

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  As you have already tried updating the drivers for the device, you can just go through the article that talks about the Code 10 error.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/

  You can run the fix in the below article data and check if this is useful.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot search for updates (all the time of different codes)

  I have a system that is used to run windows 7 well. Then I went to windows 10 and had problems after a major update soon after liberation. After that, my system did so, but I ran into issues. As a result, nearly a year later, I decided to try to go back to windows 7 with a completely new reinstall and re-upgrade. My windows 7 will not update and I miss all the tools that I can find as a substitute or a repair or cmd commands. The initial error is coded C80003FA. I did a lot of difficulties which seems to be similar to my questions and the Fix - it tool cannot find convenience stores. I also tried the standalone installer of windows and he found the fix, but could not install. After doing all the patches that seem relatable to me somehow, I now get the error code 8008005. This code came while typing, but other codes appeared as well.

  Y at - it suggestions on what I can do or is there a way to help?

  Thank you

  SYSTEM:

  Processor: AMD FX 8350 3.2 GHz

  GPU: MSI R9 380 4 games

  RAM: AMD 8 GB DDR3 RAM

  Hard drive: Seagate 1 TB drive HARD drive

  PSU: Corsair CX750

  MSI M5A97 EVO Motherboard R2.0

  Hi Harry,.

  At this point we suggest is that reset you the Windows Update components. To do this, you can consult this article for steps to reset the Windows Update components

  Let us know how it goes.

• How to set the padding for TextField?

  Hello, forum

  Is it possible to put the padding of the TextField, as I put it for LabelField using the setPosition method?

  Thanks in advance,

  Mikhail

  Rather than add the real value of the empty space in the TextField, I suggest to add an empty LabelField before the textfield and line them up according to your requirement using HorizontalFieldManager as you mentioned.

• Cannot open the Windows Firewall, says cannot open for reason unidentified.

  Original title: Windows Firewall problem

  I can not open it says cannot open Windows Firewall for unidentifies reason, someone suggessions?

  Hello

  1. What is the full error message that you receive?

  2 did you a recent software or hardware changes to the system?

  3. what anti-virus software do you use?

  Method 1:

  You can try to start the fixit from link and check if it helps:

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2:

  You can read the article and check if it helps:

  http://support.Microsoft.com/kb/943996

  Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  You can also check out the link and try the steps by Karena Support Engineer on August 17, 2010 and check if this may help

  Unable to activate Windows Firewall: error 0x6D9 code

  Method 3:

  You can also temporarily disable third-party security software and the firewall installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

• Cannot install for photosmart d110 driver because not digitally signed

  D110 Photosmart all-in-one.  Cannot install driver after running recovory disc.

  Windows 7 64 bit Dell Inspiron 580.

  I had to run the recovery disk after receiving the virus/malware.  It seems that all the other printer drivers are on my computer.  I downloaded the driver from HP.com several times and it cannot be found by my computer.  Manually, I tried to load it from the disc supplied with the printer and got the following error message: "cannot install driver because it is not digitally signed or not signed in the appropriate way.»

  We could continue, while reinstalling Windows would finally settle the matter. If you believe that the issue is related to the virus, you can run a scan for viruses on your computer using any anti-virus software you have. After that, reinstalling Windows could be the next step.

  Alternatively, you can try to install the printer in Mode safe, if you have not already.

  If you could mark a message with the accepted Solution if I helped you, would be great!

  Please let me know what happens. Thank you!

  Mario

• Cannot modify a textfield value!

  Hello

  I have a small JavaFX program where I try to set a value for a TextField.

  Below is the part of the FXML file and put highlight is the TextField

  file fxml

  < AnchorPane minHeight = "0,0" minWidth = "0.0" prefHeight = "185.0" prefWidth = "598,0" >

  < children >

  < TextField fx:id = "actiontarget" editable = "true" layoutX '146.0' = on = prefWidth "73.0" = "198,0" text = "" / > "

  < button layoutX = we '344,0' = "73.0" mnemonicParsing = "false" onAction = "#handleSubmitAction" text = "Browse" / >

  Controller class

  @FXML

  private TextField actiontarget;

  actiontarget = new TextField();

  String path to a file = 'Some files name;'

  actiontarget.setText (pathofFile);

  I want to display a string to the text field value.

  IF I use this fxid (actiontarget)

  But actiontarget.setText (path to a file) does not work.

  There is no display and no value for the text field.

  Can someone please help!

  How can I set value in this text through code above field.

  Thank you

  Praveen

  Get rid of: actiontarget = new TextField();

• Cannot copy the text, OCR cannot copy for translators, recognization of manual and scanned text, text of manuals, Non - English text product impossible to translate

  Revision of textbooks online, we are facing difficulties following.

  Could you please suggest any solution (purchase of adobe software) to meet the following requirements.

  1. Manual language: failed to copy the text to the translation of Google.
  2. OCR (OCR): impossible to copy the text to translate.

  3 Manual of scanned text recongnization

  
  

  Currently, we use Adobe Reader version 11.

  
  

  Please address the above query as soon as possible.

  
  

  Thanks and greetings

  Suresh
  

  Adobe/Acrobat Reader cannot perform text recognition; you will need Acrobat for that.

• RT-20372 said backspace does not work for TextField, but if you open the new window it works

  Hello

  See this bug (registration required) = "TextField doesn't consume backspace and delete key events.

  I use this

  • Win 7/64-bit
  • last 7 + updates java to update
  • Kepler Eclipse + efxclipse

  I'm a developer of this application from https://github.com/Johnmalc/BankApp , I encountered the problem that shouldn't work. For me it works and I don't know why?

  The said bug that backspace does NOT work in the textfield. But in my case If I open a new window (concert at the scene) and then back in the new window works fine. This is my example of this controller class that is responsible for such behavior.

  class Controller {
  @FXML
      private TextField AccountNumberField;
  .......
  
  @FXML
      void initialize() {
  AccountNumberMethod();
  .........
  }
  @FXML
      void AccountNumberMethod() {
          AccountNumberField.addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
  
                      @Override
                      public void handle(KeyEvent event) {
                          if (event.getCode() == KeyCode.ENTER) {
                              int AccountNumber = Integer.parseInt(AccountNumberField.getText());
                              ac.setAccountNumber(AccountNumber);
                          }
                      }
                  });
      }
  }
  
  
  
  
  

  And it is the class where I call class Conroller

  @FXML
       void NewAccount() {
            NewAccount.setOnAction(new EventHandler<ActionEvent>() { //NewAccount is button
  
                 @Override
                 public void handle(ActionEvent event) {
                      Parent root;
                      try {
                           root = FXMLLoader.load(getClass().getResource("/res/account.fxml"));
                           Stage stage = new Stage();
                           stage.setScene(new Scene(new Group(root)));
                           stage.show();
                      } catch (IOException e) {
                           System.out.println("error");
                      }
                      event.consume();
                 }
            });
       }

  So my question: which is on purpose or it is a bug that should be reported.

  You can also see my 3 files of the application here https://github.com/Johnmalc/BankApp/tree/master/src/application

  I have prepared a file zip-eclipse-so you can download it and help me as soon as possible.

  https://www.dropbox.com/s/5lxzdrg19c399q7/TestApp.zip

  Thank you. Ask me more if needed.

  @malcjohn

  Well, that said, in your controller, you event filters that consume all events events KEY_PRESSED on text fields. So it is little surprise that the text field does not have to receive some key events. It is not at all clear to me why you did it; These event filters treat only enter anyway, so why not simply manipulate the ACTION_EVENT on these controls. (If I understand it, the key events that generate text characters are managed by listeners for KEY_TYPED text fields, while for non-text characters key events are handled by event listeners KEY_PRESSED. Which is why you normally receive the regular keys.)

  Your event management is extremely complicated anyway. You register methods in the FXML to manage events, but the methods themselves define the event handler, instead of having just the event handling code. Then, you call these methods manually from the method initialize anyway. You seem to have yourself confused about management of the events of JavaFX. You probably want to read the tutorial that explains how to manage the events just by using the code Java and then read the section "add rows to the table" in the FXML tutorial to see how to save FXML event handlers. You currently have some weird hybrid of the two techniques, which is not what you think it does.