Satellite Pro L300 - PCMCIA adapter

Similar Questions

• Satellite Pro L300 - network adapter failure

  I was running my Satellite Pro L300 on a Belkin router connected to my DELL desktopsuccessfully wireless, except that sometimes the adapter on the Satellite failed and I had to restart the portable computer to restart.

  The other day I decided to reinstall windows XP on my desktop, because he soon grindingly.
  All worlks OK and I can access the internet from the desktop and my laptop is picking up the signal from the router but will not let me connect.

  The network shows under available networks, but when I try to connect it says "windows could nto connect to the WLAN.
  The network icon has a red line through it. I updated the driver and according to copntrol Panel operation.

  Am posting this from my office

  Hello

  Try this;
  -Start the console (in run, type CMD)
  -In the DOS window type; ipconfig / renew

  This should renew all your network cards and must assign the IP again.

  Using the ipconfig command, check if the wireless adapter is listed in the list.

• Satellite Pro L300 - 'problem adapter - driver not installed.

  I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very techinical so I would be grateful for simple answers.

  If you can help I would be very grateful.

  I went to Accessories - system information and here is the result:
  Connection TV/video Microsoft name [00000001]
  Card type not available
  Connection TV/video Microsoft product Type
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 1
  Service name NdisIP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000003] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 3
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 04/08/2004-20:00)

  Name [00000004] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 4
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 04/08/2004-20:00)

  Name [00000005] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 5
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 04/08/2004-20:00)

  Name [00000006] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 6
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 04/08/2004-20:00)

  Name [00000007] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 7
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 04/08/2004-20:00)

  Name [00000008] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  8 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address A4:3E:20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000009] Realtek PCIe FE Family Controller
  Adapter Type Ethernet 802.3
  Product Type Realtek PCIe FE Family Controller
  Installed Yes
  PNP ID of device PCI\VEN_10EC & DEV_8136 & SUBSYS_FF641179 & REV_02\4 & 23F 5EDAD & 0 & 00E0
  Last reset 10/05/2012 07:09
  Index 9
  RTLE8023xp service name
  The 0.0.0.0 IP address
  IP subnet
  Default IP gateway not available
  Active Yes DHCP
  255.255.255.255 DHCP server
  DHCP lease expires 21/03/2012 13:23
  DHCP lease obtained 21/03/2012 12:23
  MAC address 00:1E:33:3F:0 D: 3RD
  IO port 0 x 00003000-0x00004FFF
  0xD0010000-0xD0010FFF memory address
  0xD0000000-0xD10FFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\rtenicxp.sys (5.764.0702.2010 built by: WinDDK, Ko 228,90 (234 392 bytes), 21/03/2012 12:23)

  Name [00000010] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 10
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:1E:33:3F:0 D: 3RD
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000011] wireless intermediate driver
  Adapter Type Ethernet 802.3
  Product Type Wireless intermediate driver
  Installed Yes
  ROOT\WSIMDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  11 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\wsimd.sys (1.0.0.83, 56,06 KB (57 408 bytes), 12/04/2012 23:25)

  Name [00000012] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0002 PNP device ID
  Last reset 10/05/2012 07:09
  12 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000016] Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Adapter Type Ethernet 802.3
  Product Type Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Installed Yes
  USB\VID_0BDA & PID_8198\00E04C000001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 16
  Service name RTL8187B
  10.1.1.4 IP address
  255.0.0.0 subnet IP
  Gateway IP 10.1.1.1
  Active Yes DHCP
  10.1.1.1 DHCP server
  DHCP lease expires on 10/05/2012 08:10
  DHCP lease obtained 10/05/2012 07:10
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\rtl8187b.sys (5.1116.1226.2007 built by: WinDDK, 281.25 KB (288 000 bytes), 29/03/2012 09:41)

  Thank you!!!

  Can you please open device manager and check if this is some unknown device listed?

  By the way: see also http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

• Power supply adapter new satellite Pro L300-12Y

  HI, I have a laptop Satellite Pro L300-12 years and my adapter is beyond saving. Were can I get a new one? I couldn't find any so I ask you directly

  Hello

  You can order a new adaptor AC to a Toshiba ASP in you country.
  You can also check the reference number of the old power adapter and can perform a search on the internet using this part number for a replacement part.

  Welcome them

• Satellite Pro L300-1FL - WLAN network adapter does not exist

  Model: Satellite Pro L300-1FL (PSLB9E)
  Operating system: XP Pro SP2
  Wireless card: PA3616u-1mpc (atheros AR5007)

  the laptop came with pre-installed vista, everything worked very well (including wireless), although a little slowly, but decided to downgrade to xp. integrated SATA drivers into my xp with nlite installation disc. XP installed fine. visited the toshiba support site and downloaded all the drivers for xp and install.

  Despite the installation of the wireless driver there is still no present in the wireless network card device driver. It is an "unknown" device listed, which I think is the wireless card.

  at first I was not sure what card appeared so systematically installed that all options of wlan of the toshiba download page [intel/atheros/realtek], none has worked. little more digging autour and discovery was a then reinstalled atheros atheros wlan client on the toshiba site. still did not work. found a update atheros ar5007 driver installed, still no joy.

  forward wireless switch is on [the orange light] and has been throughout the process. have you tried enabling / disabling fn + F8, which doesn't do anything.

  I think I read somewhere (having read much too many post on this over the last few days!) that update the BIOS to version 2.4 can solve the problem. However the version offered for my model by the toshiba page BIOS update is 2.1 (which I've updated when you install all drivers in xp) and I'm not that eager to update the BIOS to a version that is not supported by toshiba, because I have no idea how fix an incorrect BIOS prevents starting the computer.

  When you look at the BIOS option "wake we wireless" is grayed out and not selectable. There is no other network without wire/related parameters. This might infer that the BIOS does not recognize the card wireless for some reason any. whereas he should have before, I started to lose its time, as worked it fine under vista wireless. so I think that upgrading the BIOS might have broken, although I can't be sure that I've updated the BIOS until I realize that the without wire did not work under XP, so it could have been broken before the BIOS update. Does this sound plausible? also, I have no idea how if is take to solve this - you can downgrade the BIOS?

  any help greatly appreciated - have been pulling on my hair for 2 days now and there is only so much googling, you can do before find yourself you constantly re - visiting the same sites over and over again!

  Thank you

  ~ andy

  worried that he may have been conflict for different drivers wlan I had initially installed, so have done a complete re - format and re-installation of xp. Install the drivers, including the wlan driver atheros. but still no adapter wlan in Device Manager.

  the unknown device in the other section of the Device Manager is listed as an ethernet controller; However glancing upward from the PCI/VEN # (C & DEV_001C 168) on the basis of data from the provider PCI identifies that this is indeed the atheros card.

  This means that it is not a hardware/BIOS problem as I previously suspected. XP can 'see' the device, but for some reason, the driver won't work. Hmm

  someone at - it had a similar problem? is it just a matter of finding the "correct" driver

  Thank you

  ~ a

• Satellite Pro L300 - wireless network adapter issues

  Hi guys

  Im having problems with the wireless connection, he sees its network but wont connect.issues with access point or adaptor.i tried everything and still no joy.

  im hoping some cheering helps

  Satellite Pro L300

  Win 64

  You can connect your laptop to the router using the LAN cable?

  Try restarting your router. Disconnect password and check if the WIFI connection working.
  Also, check the router and WLAN card settings. Don't forget that both devices use the same WLAN mode.

  

• Satellite Pro L300 - required external power supply (power car)

  Hi all

  I have a Toshiba Satellite Pro L300 and want to plug it into my car supply.
  The battery is 10.7 volts and the charger is 19 volts. I do not think that plug into the car is causing a problem, but there is no mention of this in the manual.

  Has anyone tried this and it worked great.
  I didn't wan't to recharge the battery just to be able to run the laptop for more than the battery allows.

  Hello

  You need a car adapter to connect the laptop to the 12V car

  Looking in google for adapter cigarette lighter for Satellite Pro L300?
  To do this, and you'll get some hits

  Otherwise, you can order this part of the Toshiba authorized service partner in your country.

• Satellite Pro L300 upgraded to Win8 but I would like to update the drivers

  I have upgraded to Windows 8, but I found the Wifi adapter needs to be reset frequently (it seems to be without a cause) - Troubleshooting Windows 8 solves it by resetting the adapter, but I thought there will be a fix for this?

  When I tried to update the drivers I found that the L300 is not (in the not extensible or expandable lists)-is the L300 compatible in this respect by another model? Or can you suggest how to update all the drivers of Toshiba for this model.

  Thank you

  Your Satellite Pro is the model of laptop old enough and not supported for Win8.
  It is difficult to find drivers for the notebook not supported models and old.

  Problem is that if you make the decision to do so anyway you are on your own and can be all just lucky if everything works properly.
  > is the L300 compatible in this respect by another model?
  It is not easy to give you the right answer. What needs to be done is to compare each hardware component important as chipset, GPU, chip sound, LAN/WLAN with other models and see if some Win8 drivers are available. It is not so easy.

  For example: Toshiba Satellite pro L300 offers 4 different hardware platforms. One you have? What is the model number of your machine?

• Satellite Pro L300 will not start

  I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

  Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

  Can anyone help.

  It s certainly nothing wrong with a RTC battery (as you said internal battery).
  The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
  But I guess that this isn't a problem.

  The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
  This should be the first step, since the RAM modules are easy to replace.

  All other parts should be checked by the type of service.

• Satellite Pro L300 - use of the power cable between the countries

  I'm buying a Toshiba laptop Satellite Pro L300 T4200 everything here in New Zealand, where I will be staying for the next six months. However, I'm heading back to Alaska (United States) in April.

  Someone could answer my concerns about the use of power cables and to buy once back in the States. for the most part is it safe to use a USA power cable in this laptop bought NZ without breaking something to bits?

  THX, kim3300

  When you return to the States, I think that you must travel kit adapter power supply only.
  I recommend you consult your dealer and gathering information that it will be the best for you.

• Satellite Pro L300 - what with firewire port express card?

  I have a Satellite Pro L300. It doesn't have a Firewire (iLINK) port, I need to capture video from my Sony Handycam footage.

  I am wanting to buy a card Express of Firewire. Anyone know what model is compatible with my laptop which runs on Windows Vista (and where I can buy it)?

  I bought a Belkin Firewire notebook adapter, but it is not compatible with Windows Vista and it does not seem to fit. It seems to be too big for the express card slot.

  Hello

  Generally, all cards Express should be compatible.
  You should google for firewire EpressCard.
  You will get many more hits...
  I found also some nice offers on the amazon page

• Satellite Pro L300: Noise of nasty when connected to your hifi installation comments

  Hi, thanks for reading,

  I just bought a Satellite Pro L300, to use for DJing. I use a Behringer USB mixer, and when I plugged it to the top there is a sound really bad comments coming out of my speakers.

  I tested it in the headphone jack output by connecting the laptop directly to my sound system and I hear the same comments.
  I went to check through troubleshooting and audio driver settings, everything seems fine.

  I thought then he might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped. I tried to use a different power supply to an old laptop and the noise starts again.

  Is there anyway that I could solve this problem? I need to run food as the custom of the last battery life long enough while I DJ.

  Thanks in advance

  > so thought that it might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped
  I agree with you and Akuma appears that this noise is related to the question of land
  In many cases, different people said they could solve this by using a 3 cable and AC adapter power cord.
  These special adapters can be ordered from the authorized service partner.

• Satellite Pro L300-128 - startup problem

  Hi all

  I recently bought a Satellite Pro L300-128 GB specification, that has a Celeron M550 running Windows XP and a construction date of the end of June 2008. I have a problem with the switching on of the machine if it has been turned off for a long period of time.

  Basically, if the AC cable is inserted into the computer laptop and plugged in, the green light turns on, but pressing the button it does nothing. By the process of elimination, I have found that, after a short period of time (say 15-30 minutes) if (and only if) the AC cable is then removed from the laptop, it lights up then!

  Plug the AC cable, while the laptop is on, do not cut the machine and charge the battery as usual. The battery life seems very good, if a little short (say 1.5 - 1.75 hours when used "constantly").

  If the computer is restarted, it lights again very well - if it is turned off and left for a few minutes, once again no problem. But, if she is not with the battery fully charged and left all night - it lights again in the morning.

  Now, as a new machine, I'm wondering if the battery needs a long initial load (such as a mobile phone)? Nothing is said about it in the manual. I have not yet checked if the battery down completely himself during the night. I haven't run the battery to the laptop for a long time (say all day) to 'trickle charge '. I don't know if the period from 15 to 30 minutes to get the thing started is once again because the battery is completely discharged during the night (I need to check the BIOS to see if "Wake up we LAN/wireless" is activated)-anyone know how long a fully discharged battery must be charged before that the machine will let you start it?

  Under the machine, there are two battery release buttons and it seems loose - I don't know if it's related, but can't see how. Moreover, when the question arose (during the first delivery the laptop), I removed the battery and tried power upwards of food, but nothing to do.

  I ran all the software updates (chipset etc) I can find on the download page, the BIOS version is 1.40 (last) of the factory.

  Any suggestions would be welcome before I have use the service of repair under warranty for the first time! I don't know if it is related to the fact that the power button seems to be a micro switch rather than a good button/switch in the conventional sense of the term, i.e. you can 'feel' it do something!

  Thank you very much
  Richard

  Hello

  If you have purchased a new laptop, the battery is empty and needs to be charged in the first place.
  You can also connect the adapter to the laptop while the battery is empty and the laptop should also lights up properly.
  The laptop must also run without the battery and using only the AC adapter.

  It should also be possible to put the laptop by pressing the power button for about a second, if this is not possible, a malfunction of the laptop could be possible.

  In such cases, it s always advisable to contact the local ASP for a verification of the laptop.

  I mean your laptop is under warranty and if something is not wrong with the machine so everything must be replaced free of charge

  In my opinion, the laptop must be checked!

  Concerning

• Satellite Pro L300 WiFi continues to drop and doesn't reconnect until you restart

  Hi, I have a Satellite Pro L300, number of model PSLB9E - 00G007EN running windows Vista professional.

  Recently I started trying to connect to my wifi at home instead of using the ethernet cable.

  Research shows my home network and then I connect with the password, everything all right at this stage, sometimes an hour, sometimes for 10 minutes and then the connection disappears. When I try and re-connect it does not find any wifi network, but I have not moved from where I was when I was connected. I have I-phones, etc. and another laptop running windows 8 connected wireless, and there is no problem with any other machine, just my toshiba!

  Sometimes if I turn off the wifi using the switch at the front and then put it again which solves it, but once again only for another 10/20 or 30 minutes. Sometimes even that does not work and I have to restart the machine to find the network! It works, but once again for a limited period until he gave up the connection and it disappears again, back to square one.

  I even tried to take this work and connect to the wi - fi, but still exactly the same thing happens, so I think I can rule out problems with my home network / router.

  I'm not very good with computers, but have managed to check if the driver is up-to-date, etc., and all appear here... Help, please!

  Post edited by: ANDY2807

  I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter

  The driver version is: 6.1162.610.2009

  My Windows Vista Business 64-bit is by the way

  > I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter
  Yes, you are right, the laptop seems to be equipped with the Realtek RTL8187B WLan card.
  This wireless network card supports 802.11 B and G standard.

  First update the WLan driver.
  Here you can find the latest WLan drivers available on the Realtek page:
  [Driver Realtek RTL8187 WLan: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=40&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  This driver is for Win XP / Vista / Win 7

  In the event that the issue will not be resolved, go to the Device Manager.
  Choose the WLan card-> properties and go to the Advanced tab
  Here, choose either the 802 standard. 11 B or G. This setting depends on the settings of your router. If your router supports 802. 11 G, you must choose G

• Satellite Pro L300-1AQ only to charge the battery while the phone is in use

  I have a Toshiba SP L300-1AQ.

  In the last month we started having problems with it quit unexpectedly, even on power outlet.
  This morning I used it for about a half hour. When I started the battery level was 39% full, so I plugged it into the outlet. The fire area on the front of the laptop came and taskbar in Windows icon showed it was plugged and load (battery light was orange).

  After half an hour, I checked the battery and it was down to 16%. I turned down the brightness of the screen to try to reduce energy consumption, but less than a minute at the level of the battery was down to 15%. The toolbar icon and power lights both still power showing tasks. The power adapter was cold to the touch. I expect that it is hot. It seems to me that the power adapter does not provide enough power to run the laptop and recharge the battery. If the laptop is in sleep mode, the battery may charge.

  We need a new power adapter?

  Thank you

  Nigel

  Hello

  It's really hard to say what the reason is but first of all, I think its hardware problem and not software related.
  Maybe the card mother doesn t charge battery problem more or the AC/DC adapter is defective. So can you test another adapter AC/DC to a friend for example? It would be interesting to know because if an AC/DC adapter works it seems to be a problem with the motherboard.

  I don t have Satellite Pro L300, I only Satellite L300 but it works really well and I can t notice a problem with the battery charging. It s all ok again :)