Cannot restart, shut down, or logout

Similar Questions

• Cannot restart / shut down comments

  I installed Windows Server 2003 on Fusion (Version 2.0.1 (128865)).

  Then I tried to install all the updates, but system (Win2k3) was slain.

  I am trying to restart or shut down but I can't not (!)

  Of course regular operation "Shut down" Windows Server does not work but it's normal behavior.

  It is whenever I do "Shutdown invited" or 'Restart Guest' in the menu 'Virtual Machine' the virtual machine screen only flashes and that's all that is really weird for me. I can not "hard reset" of my comment system! I tried same 'force quite' on the merger, but after the assassination of Fusion in this way it starts my suspended guest next time I try to run it.

  Note: It's like pulling the plug of the wall on a physical computer. Whatever this is not saved will be lost and there is always the possibility of corrupting the file system where preforming a hard stop! (Even if you have no choice but to do.)

  VMware Fusion menu bar > VM > press the option key and select Power Off

  By pressing the keys alt/option "Shutdown called" changes to "Power Off".

  Note: It also changes orders of "Suspend comments" and "Restart Guest' too.

  Or... On the library Virtual Machine ctrl - click on the target of the Virtual Machine and select Show in Finder and delete the .vmss file, the ctrl + click the target package of Virtual Machine, and then after the merger closed. Note: All that was not justified for the suspended state will be lost by deleting the .vmss file. Note: But you will have no other choice is the Virtual Machine will not suspend/resume/stop/start correctly.

• How to suspend, restart, shut down as default instead of Force *.

  I know it's strange, but I still see "Force Suspend, restart of strength and force Shut Down" when I click on the menu 'Virtual Machine' WITHOUT hold down the Option key.  This also affects the behavior when I set the preference 'when you close the virtual machine"to"Turn off the virtual machine", as he always does force stops instead of a graceful.  Note I can hold the Option key to Force * to go and make the soft stop, but that's all just annoying.

  So the question is, how can I make sure the normal shutdown of suspend, restart, are the default actions?

  My system is:

  Mac Pro 2 x 2.66 GHz Dual - Core Intel Xeon

  Mac OS X 10.5.8

  VMware Fusion 3.0.1 (215242)

  Windows XP SP3 VM (2 CPUs, 2048 MB RAM, 3D active)

  Thank you!

  The default power options are controlled by the .vmx powerType.* entries, and I think that they are also affected by the question of whether the tools are installed. You want the following lines:

  powerType.powerOff = "soft"
  powerType.powerOn = "soft"
  powerType.suspend = "soft"
  powerType.reset = "soft"
  

  (as opposed to the 'hard'). These should have been set this way automatically, but if you have imported the virtual machine from another source, they can be different.

  Note that if the client does not know how to properly manage power plants, that does not help.

• Disappears from drive mapped after restart/shut down PC

  Hi all

  Help her please this problem.

  I could connect another network drive, but I got this X: drive which is missing when I restart my PC.

  Did the procedure below:

  1. open the computer by clicking the Start button, click computer.

  2. click on map network drive.

  3. in the drive list, click a drive letter.

  You can choose any available letter.

  4. in the folder box, type the path of the folder or the computer, or click Browse to search for the folder or computer.

  To connect every time that you log on your computer, select the check box to reconnect at logon .

  5. click on Finish.

  - And I can't just change the letter of the road network as it was the way with the different macros.

  I try mapping the command-line instead and see if it holds. Here's how:

  1. Click Start, find the guest orders and do a right click to use "run as Administrator".
  2. To the administrator command prompt, type, and then press ENTER:

     NET use x: \\server\folder\subfolder

     (replace the server in the folder that you map)

• El capitan cannot restart, stop or close the session

  If someone has problems with the restart, shut down or close the session with El Capitan (items disappear from the screen, but then restart stops on a white screen, the cursor still moves, dock still works) I have a possible solution. It should probably be a musician for your problem but check library-> Audio-> Plugins-> HAL and make sure that you don't have a plugin file named Digidesign CoreAudio or Avid CoreAudio. These two causes this problem. Avid is the most recent files, but still incompatible with El Capitan. Delete this file. Hope that helps someone.

  Yes!  I had this problem for awhile now.  Solved!  Thank you

• Satellite A300-1EC cannot load the OS and restart just /shuts down

  Can you help me with my problem of A300 PSAG0Elaptop.

  This is the case:
  before that I can still use my laptop normally without plugging the power cord but when plug the source ca the unit restarts all of a sudden. I charge the battery only when the unit is off. And now the worst case gets when I installed the recovery disk hoping would solve the problem. I can no longer load the operating system; It's just loading then it does not load and suddenly shuts down and sometimes simply frozen. I have not tried the safe mode, mode ahci, system recovery, system repair, and stil no chance.
  I brought this already at the center of ASP service and they demanded almost 1 unit brand new laptop for repair of my laptop is not advisable to send them to repair.
  I doubt that my system bios is not compatible with my vista Home premium OS, or perhaps my wife update of the bios that is not compatible in windows update. My current bios I checked is 1.4

  Given that I have no option instead of junking my laptop, I want to update or back to the original settings of the bios that can help to repair my device.
  Can you help me on how to update or revert to the original my system bios? As I can't access the windows can you teach me step by step using the usb port of my camera on system bios update? Or do you have any suggestions?

  Need help bad
  Here are the specs of my unit
  A300-1EC
  P / N:PSAG0E - 02J025AR
  Windows vista Home premium core 2 duo T5750

  Hey Buddy,

  First of all, the BIOS can only be updated Windows System. There is no other version that you can download on the site Web of Toshiba.

  But I doubt that this problem is caused by the BIOS. It s I knew not that it is possible to change certain values which make impossible Windows installation. With other words BIOS is secure and with all the settings, it should be possible to install Windows.
  An alternative you can press F9 in BIOS to load the default settings. That would be the best option.

  But according to your assignment, if Windows installation of recovery disc doesn t work and you are not able to charge the battery while the laptop is turned on it seems to be a hardware malfunction because seriously it has nothing to do with the software.

  So either come you into contact with the ASP to get the repaired device or you can repair yourself with original spare parts with parts ASP or second-hand on eBay or similar platforms.
  Of course, you can buy a new laptop: in case the motherboard would be defective because the motherboard is very expensive spare part, it would be the best choice in my opinion.

• Pro Late 2011: Force Quit applications or shut down/restart computer.

  Cannot force quit applications (happened with several applications, five9, firefox crash reporter, etc.). Basically, if the application has stopped responding, can not force quit or remove the dock or anything like that. Cannot restart or shut down computer either. I'm stuck with inadmissible apps in dock to the computer press the power button to stop / stop.

  Tried Terminal without any result.

  MacBook Pro (15 inch, late 2011)

  Intel Core i7 2.2 GHz

  4 GB 1333 MHz DDR3

  Intel HD Graphics 3000 384

  What are the circumstances?  Just update to 10.11.5?

  Software Tablet Wacom has been known to cause these problems to the

  Uninstalling Wacom

• Windows vista (Home premium) is not shut down or restart

  The computer (with windows vista edition Home premium); NVIDIA Geforce 8400 M GT GPU) is not shut down or restart. I suspect it's due to updates of windows do not. The error code that is more common that I've seen is A 80071, 91, and then other codes of error like 80071A2C. Here are updates of security for vista and internet explorer. Please help on this issue so that the pc starts shutting down as usual.

  Thank you

  "md123456" wrote in message News: 0d2c53df-b4e6-41b0-8773-211803475406...

  Thank you very much. Would be a new instal OS solve these problems?

  If you mean a new facility on a reformatted drive or a system recovery using recovery of the manufacture process, Yes, certainly, unless it's a hardware problem - but then you learn nothing about what caused the problem in the first place and so how do I prevent it from happening again.
  WRT your mistakes: -.
  1. nothing to worry about, as most of the machines do not have parallel ports today (unless yours does?)
  (2) it is difficult to talk about this, without more details-, but because they say "dependants", rather that "unload", it can probably be ignored.
  (3) it seems normal - I've seen a lot of PC with this error, and apparently nothing wrong. -It is important only if you are connected to a domain server
  (4) the service (I think) is a result of system crash, rather than a cause of the grip.
   
  It seems that the cause of this will remain a mystery.
  My earlier concern about SR doesn't work not just because of problems still standing stop - but back your data first, so that if the worst happens and you cannot start the system later, you can go to plan B.
  As Lorien says, try a back system restore to before the problem started - although at 2 months, I would worry about the stability of the system later. Since you already said that you are willing to do a reinstall if necessary, give it a whirl :)
   
  HTH
   
   
   
   
  
  --
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• display problems, shut downs, restarts

  Original title: Windows 10

  I have upgraded from windows 7 to windows 10. I hate it, I have had no trouble with my computer since then, display problems, shut downs, restart ect this is the worst operating system. my computer is only a year and a half. I did all the recovery disc, the system image, repair disk and back ups from the first day. at - it someone now how to return to windows 7 or I have to take it to a tech and spend more money and time. I would also not recommend 10 to anyone unless you want a mobile phone instead of the computer. I might be old school, but I never had these problems before installing windows 10. Help

  Hello

  Use them if you want to try to fix the problems. Because the computer is not
  This old do not forget to check with the help of the manufacturer of the motherboard of the system,.
  their documentation online and drivers and ask in their forums on any

  known issues and compatibility.

  If you are a 3rd party antivirus on the operating system you upgraded OR if you have a
  now uninstall it and then run the removal of its creator tool. Use Windows Defender
  in Windows 8/8.1/10 is a complete antivirus. Despite all the hype out there
  Windows Defender and Windows Firewall are real superstars.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  ===============================

  Check this box:

  Right click on start - Control Panel - the troubleshooting button - right click Show all.
  Maintenance of the system.

  -----------------------------------------------------

  Windows key + X - command prompt (Admin)

  SFC/scannow

  Note If this poster of uncorrected errors - do underneath without worrying.

  When finished that run these:

  DISM / online/cleanup-image /scanhealth

  DISM / online/cleanup-image /restorehealth

  Note If this indicates errors not corrected - do underneath without worrying.

  Then, restart the computer.

  Make sure that you run the BIOS and latest drivers available.

  Look for the updates with system Maker (manufacturer of motherboard for customized systems)
  for BIOS, chipset of low level driversand the major embedded and separate
  device drivers. Run update DriverView - VIEW driver Microsoft set hide -.
  those without drain on their behalf.

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double-click - driver
  tab - write version information. Now click on UPdate Driver (this cannot
  No matter what as MS is far behind the certification of drivers) - then do a right click - Uninstall.
  RESTART this will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and
  then device Maker (Realtek, Intel, Nvidia, ATI, for example) of the site and get their
  the most recent versions. (Look for BIOS, Chipset and software updates from the Maker system
  (website here).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  Heck manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 will not shut down or restart

  Hi guys, basically for the 3 days since my computer won't shut down or restart. I normally turn off every night and I've never had this problem before. I used the tool to update window update, but it says that it cannot complete the installation until I restart, but obviously I can't do that either.

  I tried to change the power does-that is to say buttons when the laptop closed = stop down. But even that won't work.

  Anyone has any ideas that could help me solve this problem?

  Thank you.

  Not sure, but what about the command 'shutdown '? (perhaps with the /r (reboot) option)

  http://TechNet.Microsoft.com/en-us/library/cc732503%28V=WS.10%29.aspx

  or

  http://pcsupport.about.com/od/commandlinereference/p/shutdown-command.htm

• Icons remain in place when I shut down or restart

  My icons move and expand on the restart or shut down my computer. I tried so many ways to address this issue and nothing that I do work!
  I want that my icons organized and light them as I wish. It's so awkward knowing that everytime I restart or shutdown my PC, they get auto disposed in the left side in a court order, I don't want them to be. They seem to be locked in an alphabetical order form and even when I unchecked everything and try to arrange my icons, each time to restart or shut down, they self organized, put in alphabetical order and to a medium size (I mean small) on the left side of the desktop.

  I tried to refresh all moving them, making sure that the theme of my office does not allow changes, the SHIFT while clicking on, updated drivers but nothing works!

  I have Windows 7 and ATI Radeon card graphics card. This problem has occurred as soon as I forced a stop down by holding down the power button. It wasn't the first time I did it, but for some reason, it happened today.

  Discover the information on the website of this part 3.
  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  It might be useful, however, Microsoft cannot guarantee that problems resulting from the use of third-party Solutions can be solved. With the help of suggestions from third party is at your own risk.

• can I stop an active backup in case of power shut down and restart to the top where I left?

  can I stop an active backup in case of power shut down and restart to the top where I left?

  Hello

  We can stop the backup process, but cannot pause.

  For more information about the backup and restore process, see the link:

  Backup and restore: frequently asked questions

• My computer won't shut down or restart

  There was an update of the systems, and after that I installed it my computer is unable to shut down or restart. I have to hit the power button to get it to turn off. When I close all the way down he does is get rid of the toolbar and icon of my office leaving me just my wallpaper. Now, I have an update that requires a restart. What should I do?

  Outdated software for a Tablet Wacom can prevent the closing. If you no longer use the device, please remove the software. Otherwise, update the latest version of the Web site of the manufacturer.

  After following the instructions on the removal link above, you may also need to open the users and groups in system preferences, select the login items tab and remove all Wacom related items. It is because the uninstall program is defective.

  Back up all data before making any changes.

• IMac restarts or shut down normally

  I have a problem with my Imac where I won't shut down or restart (it begins to process then stalls after that applications disappear on the home screen). I tried to reboot in safe mode. Can anyone suggest a fix for this mess?

  What happens when you try to reset the PRAM as directed by the iMac SMC and reset the PRAM?

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/