display problems, shut downs, restarts

Similar Questions

• Windows live quickcam pro 9000 when try to record vidio computer shut down restart

  Logitech Quickcam pro 9000 v-ubm46 window live... Quick capture... take a picture Yes... When try to record vidio computer shut down & restart

  Window xp pro served pack 2.2002 quickcam v11.8

  Suggestions appreciated thank you for research

  had no any error message the computer just black screen close

  Sorry, the problem is with the Quickcam capture

  Thank you for your help

• I can still access my Manager tasks, Shut Down, restart, sleep, and Hibernate options went on the Start Menu After uninstalling Secure browser review.

  I recently downloaded Secure browser review for a test in Spanish for a class.  I uninstalled the program successfully, however I still can't access my Manager tasks, Shut Down, restart, sleep and Hibernate options went on the Start Menu.  Finally, before taking the test, my computer is always locked.  This means that whenever he 'slept' that I have to enter a password or use my HP SimplePass of fingerprint to unlock.  Now, it does not require a password, or it is not locked.

  I don't think SEB is not completely uninstalled, or he changed the settings on my computer and I can't figure out how to change their return.  Help, please!

  Original title: Secure Browser review

  Hello

  Do a system restore, if necessary in Safe Mode, until you have installed the browser...

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  See you soon.

• Pro Late 2011: Force Quit applications or shut down/restart computer.

  Cannot force quit applications (happened with several applications, five9, firefox crash reporter, etc.). Basically, if the application has stopped responding, can not force quit or remove the dock or anything like that. Cannot restart or shut down computer either. I'm stuck with inadmissible apps in dock to the computer press the power button to stop / stop.

  Tried Terminal without any result.

  MacBook Pro (15 inch, late 2011)

  Intel Core i7 2.2 GHz

  4 GB 1333 MHz DDR3

  Intel HD Graphics 3000 384

  What are the circumstances?  Just update to 10.11.5?

  Software Tablet Wacom has been known to cause these problems to the

  Uninstalling Wacom

• Shut down / restarts when the firewall is enabled on Satellite L30

  I get an alert saying that my firewall is disabled. If I click on the alert, he told me that the windows firewall and Norton firewall are turned off. If I go to Norton Security Center it says firewall is enabled. Free Norton was installed when I bought my satellite L30 PSC33E of 90 days.

  If I do any adjustments such as click on activate windows firewall I am firm downs / restarts every few minutes. Recovery Center says I have a Norton software problem.

  Help, please. P.S. I'm very new to this lark of computer!

  Have you ever tried to remove Norton and use another application? In which case this alert occurs?

• Explorer Windows problem shut down on my Xp computer-ModName bho - project.dll ofset 00002e78-C; \DOCUME-1\HP-ADM-1. HOM\LOCALS-1\Temp\37df-AppCompat.txt

  Will not allow acess to any function of windows Explorer.  I haven't changed anything about it or the computer. I would be very happy with all the information I can acquire. Thank you.

  Hello

  Follow these steps and check if they help.

  Step 1:

  Test the issue in safe mode.

  Step 2:

  If the problem does not occur, try to clean boot.

  Note: The steps in the article to restart your computer as usual.

  Step 3:

  Perform SFC scan to check whether the problem is related to missing or corrupt system files.

  Step 4:

  Check if the problem occurs in a new user account.

• Shutting Down/restarting

  I get several errors in popup telling me windows needs to restart.  Here's 3 of them:

  1. "Windows must now restart because the plug-and-play service terminated unexpectedly."  (Then he stops and restarts)

  2. "Windows must now restart because the DCOM Server process Launcher service terminated unexpectedly.      (Then he stops and restarts)

  3. "host process for windows services stopped working and was closed.  A problem caused the application to stop working correctly. "(Then he stops and restarts)

  Any help/suggestions would be greatly appreciated

  Hello

  This could be due to several reasons. To have control over it, try to start the computer in safe mode. If everything works fine, then you can go for the clean boot. A reason may also be a Virus. I think about running a scan online as well.

  For the online Scan: www.safety.live.com
  To search for malware, Ad-ware or spyware, you can check the thread of Vincenzo Di Russo:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 will not shut down or restart my computer. I tried all of the suggestions I've seen previously displayed.

  My computer shuts down fine with Vista (64-bit), but not with Windows 7 (Home Ultimate, 64-bit).  It disconnects me and shows the "Stop" screen, access the drive hard as if he does something, but never closes my computer (or monitor) off the coast.  It's the same thing when I'm saying Windows restart my computer.  I always hold the power button to turn off.  Occasionally, the next time I start up, I get a message saying that the computer has been shut down unexpectly, but usually not.  Although I don't think that this issue is damaging physically my computer, it is still an annoying problem.

  So far I have tried:

  -Modification of the settings in my BIOS ACPI.  I don't have the ability to toggle ACPI, only to change between 1 & 3.  I tried them both.

  -Method of "Clean boot" Troubleshooting Microsoft.  Even with all non-essential services and startup items disabled, I always have this problem.

  -Disable Windows Fax.  Only one had this problem, and so I thought I would give it a shot.  Not good.

  -Another forum suggested turning off the M-Audio card.  Tasted it.

  -Yet another forum suggested changing "power settings" in the device to the IEEE Bus controller Manager 1394, allowing the computer stop the computer, or something in this sense.  I see no option anywhere to change the power settings.

  Suggestions of new, I can add to the list?

  After reading a lot on the forums and tried almost everything, patches, disabeling energy efficient features on IEEE 1394 and usb. He hit me, everything indicates that the acpi on the motherboard and the table mps. Changing from 1.4 to 1.1 in the bios MPS table solves the problem and win 7 shutsdown correctly

  ET1

• Laptop restarts when "shut down" is selected rather than close

  Most of the time when stopping down my laptop (start, stop the computer) displays a message indicating that Windows, but then stops it re-boots. As soon as he runs again, turn it off computer command works without fail. I am running XP Pro SP3. Any suggestions?

  Hi ClevelandErik,

  Follow the steps from the link below: Windows XP restarts unexpectedly or restarts when you shut down the computer:http://support.microsoft.com/kb/320299

  You can also check out the link below: Advanced Troubleshooting for shutdown problems in Windows XP:http://support.microsoft.com/kb/308029

  Windows XP Shut Down and auto-restart issues:http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 on Bootcamp. Kernel_security_check_failure regular on restarts and Shut Downs.

  MacBook Pro 13 retina

  8 GB RAM

  Bootcamp 5.0.5033

  Windows Fresh 8 upgrade from fresh Windows 7

  Hello

  I've been using Boot Camp for several months, running Windows 7 on my Mac. I need extend partition, so I decided to uninstall the Windows 7 partition (using Boot Camp on a Mac), then reinstall Windows 7 on a freshly prepared partition. Who had finished I immediately upgraded to Windows 8.

  I installed the Boot Camp of support software, and as far as I can tell all my drivers are up to date.

  However, every time I restart or shut down the computer, I get a BSOD with Kernel_security_check_failure. I tried to study it using WinDbg, but all this can point to what is NTKRNLMP.exe which shows that it is caused by something else, and it is not clear what.

  I tried to go through this process twice, so I'm on my second fresh install in Windows 8 now.

  There is no other problems at all on Mac or Windows, it is not never failed except when it restarts.

  I ran a memtest with no problems found.

  I have about this problem over the past months, I have been using Windows 7

  The only time I saw it crash not was when it was connected to an external monitor which leads me to believe it's a problem with the display driver. I tried all the drivers from the Boot Camp, Windows update software and update the Intel utility display and none of them solve the problem.

  Any help or this point troubleshooting tips would be MUCH appreciated and I would be interested to hear if someone has the same problems.

  Thank you!

  Chris

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• IMac restarts or shut down normally

  I have a problem with my Imac where I won't shut down or restart (it begins to process then stalls after that applications disappear on the home screen). I tried to reboot in safe mode. Can anyone suggest a fix for this mess?

  What happens when you try to reset the PRAM as directed by the iMac SMC and reset the PRAM?

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/

• MacBook Air 5.2 not shut down or restart.

  Hello.

  My MacBook Air 13' with OS 10.11.5 won't close (or restart) - usually. I have had this problem since Yosemite, but don't remember exactly under what version it began.

  To be more precise: current stop, all icons disappear (as usual), but the image of the Office remains active. I can always start other programs is Finder that is affected. Trying to Force Quit Finder does not help. Repeatedly (say 99 / 100 to give a number) it closed normally, but nothing in fact different... Judge without plugging anything if there's a device problem. Saute all automatic connect points. Cleaned cache and preference files dead (using Cocktail).

  What is a way I can follow the Shut Down procedure to see where it falls? Activity monitor?

  Thanks for all advice :-)

  Found the solution in an another tread with (almost) the same Air. Uninstalling the Wacom driver (in my case using AppCleaner) solved the problem. I wasn't the way of editing, since the latest driver for my bamboo tablet was the same version I had installed... (5.3.6-6). maybe a new installation works, but for now, I'm better of without the tablet. Thanks to click!

• Satellite A300-1EC cannot load the OS and restart just /shuts down

  Can you help me with my problem of A300 PSAG0Elaptop.

  This is the case:
  before that I can still use my laptop normally without plugging the power cord but when plug the source ca the unit restarts all of a sudden. I charge the battery only when the unit is off. And now the worst case gets when I installed the recovery disk hoping would solve the problem. I can no longer load the operating system; It's just loading then it does not load and suddenly shuts down and sometimes simply frozen. I have not tried the safe mode, mode ahci, system recovery, system repair, and stil no chance.
  I brought this already at the center of ASP service and they demanded almost 1 unit brand new laptop for repair of my laptop is not advisable to send them to repair.
  I doubt that my system bios is not compatible with my vista Home premium OS, or perhaps my wife update of the bios that is not compatible in windows update. My current bios I checked is 1.4

  Given that I have no option instead of junking my laptop, I want to update or back to the original settings of the bios that can help to repair my device.
  Can you help me on how to update or revert to the original my system bios? As I can't access the windows can you teach me step by step using the usb port of my camera on system bios update? Or do you have any suggestions?

  Need help bad
  Here are the specs of my unit
  A300-1EC
  P / N:PSAG0E - 02J025AR
  Windows vista Home premium core 2 duo T5750

  Hey Buddy,

  First of all, the BIOS can only be updated Windows System. There is no other version that you can download on the site Web of Toshiba.

  But I doubt that this problem is caused by the BIOS. It s I knew not that it is possible to change certain values which make impossible Windows installation. With other words BIOS is secure and with all the settings, it should be possible to install Windows.
  An alternative you can press F9 in BIOS to load the default settings. That would be the best option.

  But according to your assignment, if Windows installation of recovery disc doesn t work and you are not able to charge the battery while the laptop is turned on it seems to be a hardware malfunction because seriously it has nothing to do with the software.

  So either come you into contact with the ASP to get the repaired device or you can repair yourself with original spare parts with parts ASP or second-hand on eBay or similar platforms.
  Of course, you can buy a new laptop: in case the motherboard would be defective because the motherboard is very expensive spare part, it would be the best choice in my opinion.

• Satellite P300D-h-13 restarts after I click on shut down

  Brand new Toshiba P300D-h-13 with preinstalled Vista 32bits.
  When I click on the start menu--> Shut down, computer laptop restarts and after the reboot, when I click again on farm, laptop off of the beautiful.

  How can I solve this problem?

  BIOS upgrade to the latest version

  Hello

  Have you connected external devices to the laptop? This can cause the reboot, so remove them.

  Also make sure the Wake up on LAN is disabled. Check in the BIOS and the device of the WLAN card Manager.

  Welcome them